font used in thesis

What font should I choose for my thesis?

This post is by DrJanene Carey, a freelance writer and editor based in Armidale NSW. She occasionally teaches academic writing at the University of New England and often edits academic theses, articles and reports. Her website is http://www.janenecarey.com

Arguably, this question is a classic time waster and the student who poses it should be told to just get on with writing up their research. But as someone who edits theses for a living, I think a bit of time spent on fonts is part of the process of buffing and polishing what is, after all, one of the most important documents you will ever produce. Just bear in mind that there is no need to immerse yourself so deeply in the topic that you start quibbling about whether it’s a font or a typeface that you are choosing .

Times New Roman is the standard choice for academic documents, and the thesis preparation guidelines of some universities stipulate its use. For many years, it was the default body text for Microsoft Word. With the release of Office 2007, the default became a sans serif typeface called Calibri. Lacking the little projecting bits (serifs) at the end of characters makes Calibri and its many friends, such as Arial, Helvetica and Verdana, look smoother and clearer on a screen, but generally makes them less readable than a serif typeface when used for printed text . The other problem with choosing a sans serif for your body text is that if you want passages in italics (for example, lengthy participant quotes) often this will be displayed as slanted letters, rather than as a true italic font.

You would like your examiners to feel as comfortable as possible while their eyes are traversing the many, many pages of your thesis, so maximising legibility and readability is a good idea. Times New Roman is ubiquitous and familiar, which means it is probably the safest option, but it does have a couple of drawbacks. Originally designed for The Times in London, its characters are slightly narrowed, so that more of them can be squished into a newspaper column. Secondly, some people intensely dislike TNR because they think it has been overused, and regard it as the font you choose when you are not choosing a font .

If you do have the luxury of choice (your university doesn’t insist you use Times New Roman, and you have defined document styles that are easy to modify, and there’s enough time left before the submission deadline) then I think it is worth considering what other typefaces might work well with your thesis. I’m not a typographical expert, but I have the following suggestions.

• Don’t use Calibri, or any other sans serif font, for your body text, though it is fine for headings. Most people agree that dense chunks of printed text are easier to read if the font is serif, and examiners are likely to expect a typeface that doesn’t stray too far from the standard. To my eye, Calibri looks a little too casual for the body of a thesis.
• Typefaces like Garamond, Palatino, Century Schoolbook, Georgia, Minion Pro, Cambria and Constantia are all perfectly acceptable, and they come with Microsoft Word. However, some of them (Georgia and Constantia, for example) feature non-lining numerals, which means that instead of all sitting neatly on the base line, some will stand higher or lower than others, just like letters do. This looks nice when they are integrated with the text, but it is probably not what you want for a tabular display.
• Consider using a different typeface for your headings. It will make them more prominent, which enhances overall readability because the eye scanning the pages can quickly take in the hierarchy of ideas. The easiest way to get a good contrast with your serif body text is to have sans serif headings. Popular combinations are Garamond/Helvetica; Minion Pro/Myriad Pro; Times New Roman/Arial Narrow. But don’t create a dog’s breakfast by having more than two typefaces in your thesis – use point sizes, bold and italics for variety.

Of late, I’ve become quite fond of Constantia. It’s an attractive serif typeface that came out with Office 2007 at the same time as Calibri, and was specifically designed to look good in print and on screen. Increasingly, theses will be read in PDF rather than book format, so screen readability is an important consideration.  Asked to review Microsoft’s six new ClearType fonts prior to their release, typographer Raph Levien said Constantia was likely to be everyone’s favourite, because ‘Even though it’s a highly readable Roman font departing only slightly from the classical model, it still manages to be fresh and new.’

By default, Constantia has non-lining numerals, but from Word 2010 onwards you can set them to be lining via the advanced font/number forms option, either throughout your document or in specific sections, such as within tables.

Here is an excerpt from a thesis, shown twice with different typefaces. The first excerpt features Calibri headings with Constantia body text, and the second has that old favourite, Times New Roman. As these examples have been rendered as screenshots, you will get a better idea of how the fonts actually look if you try them on your own computer and printer.

Related posts

Should I get an editor for my thesis?

Love the Thesis whisperer and want it to continue? Consider becoming a $1 a month Patreon and get special, Patreon only, extra Thesiswhisperer content every two weeks!

Share this:

The Thesis Whisperer is written by Professor Inger Mewburn, director of researcher development at The Australian National University . New posts on the first Wednesday of the month. Subscribe by email below. Visit the About page to find out more about me, my podcasts and books. I'm on most social media platforms as @thesiswhisperer. The best places to talk to me are LinkedIn , Mastodon and Threads.

• Post (606)
• Page (16)
• Product (5)
• Getting things done (257)
• Miscellany (137)
• On Writing (137)
• Your Career (113)
• You and your supervisor (67)
• Writing (48)
• productivity (23)
• consulting (13)
• TWC (13)
• supervision (12)
• 2024 (3)
• 2023 (12)
• 2022 (11)
• 2021 (15)
• 2020 (22)

Whisper to me....

Enter your email address to get posts by email.

Email Address

Sign me up!

• On the reg: a podcast with @jasondowns
• Thesis Whisperer on Facebook
• Thesis Whisperer on Instagram
• Thesis Whisperer on Soundcloud
• Thesis Whisperer on Youtube
• Thesiswhisperer on Mastodon
• Thesiswhisperer page on LinkedIn
• Thesiswhisperer Podcast
• 12,085,525 hits

Discover more from The Thesis Whisperer

Subscribe now to keep reading and get access to the full archive.

Type your email…

Continue reading

+61 481607654

8 Best Fonts for Thesis Writing to Make It Presentable

Table Of Contents

How do font plays a critical role in thesis, 8 best fonts for thesis writing, tips to choose the best font for thesis, mistakes to avoid while choosing a font, how to format your thesis perfectly.

• Can’t Write a Thesis? Let Our Experts Do It for You

When your professor assigns you a thesis, he excepts it to be perfect at the time of submission. The textual content of the document is the utmost source of information. So, while creating content, you should take care of the font selection. Choosing the best font for the thesis provides an attractive appearance and preserves the aesthetic value of your document. Also, the font professionally presents information. Choosing font in both ways (either online or printed form) of the thesis is crucial. If you are submitting it online, then the font makes a difference in the readability. If you are providing it in the printed form, then the font reflects professionalism.

You May Like This: The Complete Guide to Breaking Down a 10000-Word Dissertation

Sometimes, it is questioned that why the font is necessary. Well, the font is as mandatory as the content. You should know that everything is in proper fonts   for the thesis.

• To highlight headings, you can use bold and stylish fonts.
• To highlight the subheadings, you can use italic and cursive fonts.
• The information that you want to convey must be in a simple and decent font.

This particular formula will grab the reader’s attention to your document. If you don’t focus on the font, then your document will look imprudent. It can create a bad impact on your professor. If you don't show creativity while writing, then the reader will get bored and won’t show interest in your document. So, make sure to always use different fonts in the thesis according to the needs. Now, let’s talk about some of the most appropriate fonts included in the thesis.

This Might Be Helpful: A to Z of Assignment Writing: Everything You Need to Know About It

A thesis can look presentable if you include appropriate fonts in it. The following fonts will create a positive impression on your professor. Let’s take a look:

• Times New Roman Times New Roman was particularly designed for Times Newspaper for London. This font has a separate and different value in a formal style. Most of the universities and colleges suggest students use this font in a document.
• Georgia Georgia font was designed in 1883, especially for Microsoft Corporation. This is the best font for the students who want to submit the document online. It is preferred for the elegant and small appearance for low-resolution screens.
• Serif Serif is originated from Roman from a font written on a stone. Earlier, this font was not accepted universally. The specialty of this font is that every alphabet has a small line or stroke attached to the end of the larger stroke.
• Garamond Garamond is usually used for book printing and body text. If you want to write the main body or long paragraphs, then you can use this font. It is simple and easy to read.
• Cambria Cambria is founded by Microsoft and later distributed with Windows and Office. This font is the easiest to read in a hurry because it contains spaces and proportions between the alphabets. This is suitable for the body and the long sentence.
• Century Gothic Century Gothic is basically in the geometric style released in 1881. This font has a larger height instead of other fonts. If the university allows you to choose the font of your own choice, you can go for this one.
• Palatino Linotype Palatino Linotype font is highly legible for online documents. It enhances the quality of the letter when displayed on the screen. This font is majorly used for books, periodicals, and catalogs.
• Lucida Bright Lucida Bright has a unique quality that the text looks larger at smaller point sizes also. This font can fit words on a single line. To write a thesis, you can choose this font easily.

After getting brief knowledge about the fonts, let's now come to the tips to choose the best font for the thesis. Here are some major key points that you should follow while choosing a font.

• Make sure your font looks attractive.
• It should match your tone.
• Headings and subheadings must be highlighted.
• It should not look congested.
• Avoid choosing complicated or fancy fonts.

Take a Look: How to Write a Good Thesis Statement for an Essay? Best Tips & Examples

Students make some mistakes while choosing a font, which the professor dislikes the most. So, to avoid those, keep the below points in mind.

• Don’t choose fonts on your likes and dislikes.
• Put the reader's preference first and then choose the font.
• Avoid too many fonts as they make the work look unorganized.
• Make sure all fonts match your document instead of making it look like a disaster.
• Choose different fonts for titles, subtitles, paragraphs.

When preparing the thesis for submission, students must follow strict formatting requirements. Any deviations in these requirements may lead to the rejection of the thesis.

• The language should be perfect.
• The length of the thesis should be divided appropriately among the sections.
• The page size, margins, and spacing on the page should be correct.
• The font and point size should be displayed correctly.

Can't Write a Thesis? Let Our Experts Do It for You

The experts of Assignment Prime warmly welcome everyone who seeks help with thesis writing service . A thesis is one of the toughest academic papers to write for students. It takes a great amount of time, rigorous research, and perfect writing skills to complete it. To make this easy for you, the experts are here to help you write the thesis and the font selection for every section.

We are known for offering unmatched assistance with thesis and dissertation writing to students across the globe. Our professionals deliver a well-researched and informative academic paper before the deadline. We also provide help to students in research, topic selection, editing, proofreading, etc. So, stop searching for help and quickly start ordering without any delay to avail the best features of Assignment Prime . We are waiting to serve you with the best!

You may like this : How to write a discussion in dissertation

To Make Your Work Original

Check your work against paraphrasing & get a free Plagiarism report!

Check your work against plagiarism & get a free Plagiarism report!

Get citations & references in your document in the desired style!

Make your content free of errors in just a few clicks for free!

Generate plagiarism-free essays as per your topic’s requirement!

FREE Features

• Topic Creation USD 4.04 FREE
• Outline USD 9.75 FREE
• Unlimited Revisions USD 21.6 FREE
• Editing/Proofreading USD 29.26 FREE
• Formatting USD 8.36 FREE
• Bibliography USD 7.66 FREE

Get all these features for

USD 84.3 FREE

Thesis Statement Writing: How Crucial is it? How to Write? & More

All About Short Essay Writing [Examples Included]

How to Write a Letter of Reference with Templates?

Experts' Guidance on How to Conduct Nike’s SWOT Analysis

Avail the Best Assignment Writing Services in Just One Tap!

Add "5% extra off on app"

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Know more

Please rotate your device

We don't support landscape mode yet. Please go back to portrait mode for the best experience

• Color Palettes
• Superhero Fonts
• Gaming Fonts
• Brand Fonts
• Fonts from Movies
• Similar Fonts
• What’s That Font
• Photoshop Resources
• Slide Templates
• Fast Food Logos
• Superhero logos
• Tech company logos
• Shoe Brand Logos
• Motorcycle Logos
• Grocery Store Logos
• Beer Brand Ads
• Car Brand Ads
• Fashion Brand Ads
• Fast Food Brand Ads
• Shoe Brand Ads
• Tech Company Ads
• Web and mobile design
• Digital art
• Motion graphics
• Infographics
• Photography
• Interior design
• Design Roles
• Tools and apps
• CSS & HTML
• Program interfaces
• Drawing tutorials

Nature Color Palettes Inspired by the

The Epic Games Logo History, Colors,

Spread Joy: Happy Color Palettes for

The Konami Logo History, Colors, Font,

Design Your Way is a brand owned by SBC Design Net SRL Str. Caminului 30, Bl D3, Sc A Bucharest, Romania Registration number RO32743054 But you’ll also find us on Blvd. Ion Mihalache 15-17 at Mindspace Victoriei

[email protected]

Academic Appeal: The 11 Best Fonts for Academic Papers

• BY Bogdan Sandu
• 26 February 2024

Imagine settling into the rhythm of crafting your academic magnum opus—the words flow, ideas chime, yet it all hinges on how your prose meets the reader’s eye. You’re well aware that  the best fonts for academic papers  don’t just whisper to the intellect; they shout to the discerning critic in each evaluator. Here unfolds a narrative, not merely of  typography  but your academic saga’s silent ambassador.

In forging this guide, I’ve honed focus on one pivotal, often underestimated player in the academic arena:  font selection .

Navigate through this roadmap and emerge with a treasure trove of  legible typefaces  and format tips that ensure your paper stands hallmark to clarity and professionalism.

Absorb insights—from the revered  Times New Roman  to the understated elegance of  Arial —paired with indispensable  formatting nuggets  that transcend mere compliance with  university guidelines .

Dive deep, and by article’s end, unlock a dossier of sage advice, setting your documents a class apart in the scrutinous world of academic scrutiny. Here’s to  typography  serving not just as a vessel but as your ally in the scholarly discourse.

The Best Fonts for Academic Papers

Traditional choices and their limitations, times new roman : ubiquity and readability vs. overuse.

The Pittsburgh Penguins Logo History, Colors, Font, And Meaning

The dallas stars logo history, colors, font, and meaning.

You may also like

Ad Impact: The 19 Best Fonts for Advertising

• Bogdan Sandu
• 20 December 2023

T-Shirt Typography: 30 Best Fonts for T-Shirts

• 21 December 2023

Great fonts for a PhD thesis – and terrible ones

There are thousands of fonts out there – which one should you choose for a great-looking PhD thesis? I will explain the differences between serif and sans-serif fonts, what ligatures are and why you shouldn’t use that fun free font you found on the internet.

Great fonts for a PhD thesis: Serif vs. sans-serif

As I explained in my Ultimate Guide to preparing a PhD thesis for printing , there are two basic kinds of fonts: Serif fonts and sans-serif fonts. Serif fonts have small lines – serifs – at the ends of all lines. Sans-serif fonts don’t have those lines. Compare these two, Palatino Linotype and Arial:

Serifs guide the reader’s eyes, making sure that they stay in the same line while reading a printed text. In turn, your reader’s brain won’t get tired so quickly and they can read for longer.

But there is another feature that many serif fonts have. Look at these three (which are all great fonts to use in your PhD thesis, btw):

If you look closely, you will see that serif fonts often have different stroke thicknesses within every letter. This is called “weight contrast”. A subtle weight contrast further improves legibility of a printed text. Hence, I recommend you use a serif font with a bit of a weight contrast for your main text.

Which serif font should you choose?

But whatever you do, this one thing is extremely important: Choose a font that offers all styles: regular, italics , bold , and bold italics . Since these four styles all need to be designed separately, many fonts don’t offer all of them. Especially bold italics is absent in most free internet fonts and even from many fonts that come with your operating system or word processor.

Also: In your bibliography and in-text citations (if you go with an author-year citation style) you will have to display author’s names from all over the world. Many of them will contain special letters. For example German umlauts (ä, ö, ü), accented letters used in lots of of languages, i.e. French or Spanish (à, é, ñ, etc.), and dozens of other special letters from all kinds of languages (ç, ı, ł, ø, etc.). Be aware that only a very limited number of fonts offer all of these!

If you have mathematical equations in your thesis that require more than +, – and =, your font choices are limited even further . After all, the vast majority of fonts do not offer special operators.

As you can see, these criteria severely limit your choice of font for the main text. Needless to say, they rule out free fonts you can download from dafont.com or 1001fonts.com . That is why I urge you to go with a classic font. To make things easier for you, here is a table with serif fonts that offer all the characters you could dream of:

Failsafe serif fonts for your PhD thesis

These fonts are heavily based on fonts that have been in use since the invention of the mechanical printing press in the 15th century. Hence, these types of fonts have been tried and tested for more than 500 years. Hard to argue with that!

But which of these fonts is The Best TM for a PhD thesis? That depends on how much text you have in your thesis vs. how many figures, tables, equations, etc. As I have noted in the table, fonts have different widths. Look at this image showing the same text in Times New Roman (TNR), Cambria, and Sitka Text; all at the same size:

Hence, setting entire pages of text in TNR will make the page look quite dense and dark. So, a thesis with a lot of text and few figures is best set in a wider font like Sitka Text. On the other hand, if you have a lot of figures, tables, etc., TNR is a good choice because it keeps paragraphs of text compact and therefore the page from looking too empty. Medium-width fonts like Cambria are a good compromise between the two.

To see some of these fonts in action, check out this example PhD thesis where I show all sorts of font combinations and page layouts.

When to use a sans-serif font in your PhD thesis

This covers serif fonts. But which sans-serif fonts are great for your PhD thesis? And when do you use them?

As mentioned above, serif fonts are good for the main text of your thesis. But titles and headings are a different story. There, a sans-serif font will look very nice. Plus, using a different font in your headings than in the main text will help the reader recognize when a new section begins.

Here are some examples for good sans-serif fonts:

Each of these fonts – Futura, Franklin Gothic Book, and Gill Sans – are wonderful for headings in a PhD thesis. Why? Because they are easily readable, well-balanced and don’t call undue attention to themselves. Also, they have many options: regular, light, medium, bold, extra bold, including italics for all of them. And most operating systems or word processors have them pre-installed.

The criteria for heading fonts are not nearly as strict as those for main text fonts. If you have Latin species names in your headings, make sure the font offers (bold) italics. If you need to display Greek letters in your headings, make sure the font offers those. Done.

However, there are some criteria for headings. Just for fun, let’s have a look at some sans-serif fonts that would be a bad choice for a thesis:

I’d like to explicitly state that these are wonderful, well-designed fonts – you just shouldn’t use them in a scientific document. Heattenschweiler is too narrow, Broadway has too much weight contrast and Aspergit Light is too thin. All of these things impair readability and might make your opponents squint at your headings. Of course, you will want to do everything in your power to make the experience of reading your thesis as pleasant a possible for your opponents!

How are these fonts great for my PhD thesis? They are boring!

Why yes, they are, thanks for noticing!

Seriously though, the fonts not being interesting is the point. Your PhD thesis is a scientific document showing your expertise in your field and your ability to do independent research. The content of your thesis, the science, should be the sole focus. A PhD thesis is not the place to show off your quirky personality by way of an illegible font.

However, you can infuse your personality into your thesis cover and chapter start pages. There, you can use a fun font, since you probably don’t have to display any special characters.

Choosing the right font is too much pressure? Contact me for help with your layout!

Don’t use fonts made for non-Latin alphabets (Cyrillic, Hanzi, etc.)

Every computer nowadays comes pre-installed with a number of fonts made for displaying languages that don’t use the Latin alphabet (Latin alphabet = The alphabet in which this very article is displayed). Prominent examples for languages that don’t use the Latin alphabet are Asian languages such as Chinese, Japanese, Korean, Thai, etc. Other examples include the Arabic, Brahmic, and Cyrillic script. But there are many more fonts for a myriad of non-Latin alphabets. These fonts were optimized to make the characters of their languages easily readable.

However (and this is why I’ve written this entire section) they usually also contain Latin characters to be able to display the occasional foreign word.

Hence, you might want to honour your roots by using a font in your thesis that was made for your native language, by someone from your home country. It is tempting, because all the Latin characters are there, right? I completely understand this wish, but I strongly advise against it since there are some serious drawbacks.

Don’t get me wrong, I’m not throwing shade on these fonts, they are fantastic at what they were made for. Displaying long stretches of text in the Latin alphabet, however, is not one of those things. Let me explain why.

They don’t offer all necessary characters

Firstly, fonts made to display languages with a non-Latin alphabet contain the bare minimum of Latin characters. That is, the basic letters and the most important punctuation marks. Hence, they don’t have all those math operators and special characters I talked about in the section about serif fonts.

Also, the Latin characters in these fonts are usually sans-serif, so less suitable for long text.

But let’s say the non-Latin alphabet font you chose does offer all special characters and has serifs. Unfortunately, they are still not suitable to use in your PhD thesis, for the following reasons:

They are often too small or large for use with greek letters

Do you mention β-Mercaptoethanol or α-Histidin antibodies in your Materials and Methods? Or any other Greek letter? Since Latin characters are scaled differently in fonts made for non-Latin alphabets, Greek letters will not be the same size as the rest of the text anymore. For example, look at this text, where I rendered everything (I swear!) in the specified font size:

In the first panel (Cambria), the Greek letters are the same size and weight as the main text. As I have said, Cambria is one of the fonts explicitly recommended for your thesis. If you look closely at the enlarged line on the bottom of the panel, you can see that the alpha is the same height as the lower-case letters, whereas the beta is the same height as the upper-case letters. It looks neat and tidy.

However, by using a non-Latin font for your PhD thesis, you are asking for trouble.

In the second panel, I show Cordia New, a font for Thai script. At 12 pt, it is way smaller than the Latin font. The Greek letters – which are also at 12 pt! – stand out awkwardly. Also, Cordia New produces a line distance that is larger than it should be when using it for a text in the Latin alphabet.

In the last panel I show Microsoft YaHei for displaying Hanzi characters. Here, the Latin characters are larger. This leads to the Greek letters being too small. And, as you can see in the second and third lines of the paragraph of text, the line distance is quite narrow. However, the Greek letter β requires a regular line distance. So, it pushes the following line down, making the paragraph look uneven.

They don’t offer ligatures

Now, what on earth are ligatures? I could dive into the history of book printing here but I’ll spare you those details. In essence, Ligatures are two or more letters that are printed as one single glyph. Let me show you:

In the top line, you can see that the characters inside the boxes “melt” into each other. This single shape made out of several letter is called a ligature. They are mostly common with the small letter f. If you take a magnifying glass and look at the pages of a novel, you will quickly find these same ligatures. E-readers also display ligatures. Heck, even WhatsApp does it!

Ligatures also make the text easier to read. However, in order to display them, a font actually has to have the glyphs for the ligatures. And many fonts don’t. In order to find out whether a font you chose offers them, go to the character map of that font. (In Windows 10, simply click the windows logo in the corner of your screen and start typing the word “character”.) Pick a font in the drop-down menu. Now, search for the word “ligature” in the character map. If the map is empty after this, the font has no ligature glyphs.

All that being said, ligatures are not super important. I just wanted to mention them.

You can still use fonts made for non-Latin alphabets

If you want to honour your roots by way of a font, you can still do this. For example in your thesis title and/or for the chapter start pages.

In a word: Don’t go crazy with those fonts! Let your science do the talking. If you want to see what your thesis could look like with some of the fonts I recommended, check out the example PhD thesis .

Do you want to see a font combination that’s not in the example thesis? Contact me and I’ll set a few pages in your desired font, free of charge!

Click here for help with your PhD thesis layout!

Bedrijvsgegevens | About

Privacyverklaring | Privacy Policy

How To Choose The Thesis Font Type For Your Dissertation – Deatils Information

Writing a dissertation is one of the most significant academic achievements you will undertake. Choosing the right font type for your thesis is essential to presenting your research professionally and elegantly.

The type of font you choose can affect your research’s readability, clarity, and overall impression. With so many font options available, deciding which font type is best suited for your research can be challenging. We’ll guide you through choosing the perfect font type for your research.

We’ll discuss key factors to consider when choosing a font, such as legibility, readability, and aesthetics, and provide practical tips to help you make an informed decision. Additionally, we will explore different font types commonly used in academic writing, including serif, sans-serif, and monospace fonts, and highlight their unique characteristics and applications. Whether you are an experienced academic writer or a novice dissertation writer, this post will equip you with knowledge and skills.

Table of Contents

What Is A Thesis Font Type?

Choosing the right font type can be an important decision when writing a thesis. The most common font types used for academic writing, including theses, are Times New Roman and Arial. Both fonts are easily read and widely accepted as appropriate for academic writing.

However, some universities or departments may have specific requirements for font type, so it is important to check with your advisor or institution before making a final decision. Ultimately, the most important thing is to choose a font that is easy to read and does not distract from the content of your thesis.

Thesis Font Choosing The Right Typeface For Your Research

When choosing the right font for your thesis, it’s important to consider both readability and professionalism. While many options are available, some fonts may not be appropriate for academic work. Here are some tips for choosing the right typeface for your research:

• Stick with traditional fonts. Times New Roman, Arial, and Calibri are commonly used in academic papers and have a professional look.
• Avoid decorative or script fonts . While these may be aesthetically pleasing, they can be difficult to read and may not be taken seriously by your readers.
• Consider font size and spacing. Ensure that your chosen font is legible when printed at a small size and that there is enough spacing between lines to make reading comfortable.

Choosing the right font is an important part of presenting your research clearly and professionally. Take the time to choose a font that will enhance the readability of your work and reflect the level of professionalism expected in academic writing.

Factors To Consider When Choosing A Thesis Font

When choosing the perfect font for your thesis, there are various factors to consider. First and foremost, readability is a crucial aspect. Choosing a font that is easy on the eyes and doesn’t cause any strain is important. Additionally, professionalism is key in academic writing, so select a font that aligns with the formality required in your dissertation.

Consistency is also vital; use a single font throughout your thesis to maintain a cohesive look. Finally, accessibility should be considered to ensure that everyone can read and understand your work regardless of their visual abilities. Considering these factors, you can find the perfect thesis font type that complements your research topic and style while meeting academic requirements.

Readability

Ensuring that your dissertation is readable is crucial when selecting a font type for your thesis. A font that is too small or difficult to read can make your work less accessible and harder to understand, ultimately hindering its impact on readers.

Sans-serif fonts like Arial or Helvetica are often recommended for their clarity and legibility, while serif fonts like Times New Roman can add a more traditional touch. Additionally, it’s essential to consider the spacing between letters and lines and any special characters or symbols required in your thesis.

Legibility is a crucial factor to consider when selecting a font for your thesis. The last thing you want is to make your work less accessible and harder to comprehend by using a font that is illegible or too small in size. Stick with simple, clear fonts like Times New Roman or Arial, which are popular for academic writing due to their easy-to-read letters.

Avoid using overly intricate or decorative fonts that can detract from the legibility of your work. Be mindful of the font size and spacing between letters and lines as well, as these factors can also affect the legibility of your document.

Selecting the appropriate font size for your thesis is crucial to its readability and overall appearance. Most universities require a font size between 10 and 12 points, but it’s essential to check with your specific institution for their guidelines.

Choosing a font size that is too small can make your thesis difficult to read while selecting one that is too large can make it appear unprofessional. Consider the content of your thesis when deciding on a font size – if it contains detailed charts or diagrams, you may need a slightly larger font for optimal clarity.

Tips For Formatting Your Thesis Font

When formatting your thesis font, following a few tips can go a long way in creating a professional-looking and readable document. First, choose a font that is easy on the eyes and appropriate for academic writing. Stick to one or two fonts throughout your thesis to maintain consistency and avoid distracting your readers.

Additionally, attention to the font size, line spacing, margins, and indentation. Ensuring that these elements are consistent and properly formatted can make a significant difference in the overall appearance of your thesis. Finally, proofread your work before submission to ensure it meets all necessary guidelines and requirements.

Properly formatted margins can make or break the appearance of your thesis, so it’s essential to get them right. Margins are crucial in improving readability and ensuring that your thesis looks professional.

The standard margin size for academic papers is 1 inch on all sides, but it’s essential to check with your institution’s guidelines as some universities may require different sizes. Paying attention to the margins can help ensure that your thesis looks polished and well put together.

Line Spacing

Effective formatting of a thesis font includes appropriate line spacing to ensure readability. Line spacing is an essential factor that impacts your thesis’s overall appearance and readability. It is important to balance too much space or too little space between each line. Single-spacing can make the text appear cramped, while double-spacing creates too much white space, making reading challenging.

Most universities require a line spacing of 1.5 or 2.0 for academic papers, but it’s crucial to check with your department or advisor for specific guidelines in your academic discipline. Proper line spacing helps improve the document’s visual appeal and makes it easier for readers to engage with the content.

Indentation

Indentation is an essential factor to consider when formatting your thesis font. It helps create a clear and organized document by separating each paragraph from the previous one. The standard indentation for academic writing is 0.5 inches or five to seven spaces.

Consistent application of indentation throughout your document, including in block quotes and reference lists, can make your thesis look more professional and easier to read. Proper use of indentation gives your work a structured appearance, making it easy for readers to navigate your document easily.

The right font choice is essential when it comes to pagination in your thesis. You want to select a legible and distinguishable font for page numbers. Arial, Times New Roman, and Calibri are popular choices for pagination in academic documents.

Additionally, consider using bold or italic formatting for page numbers to make them stand out and avoid confusion. Remember that choosing the right pagination font is just one of many factors contributing to a professional-looking and well-organized thesis.

How To Change The Thesis Font Type In Adobe Indesign?

When it comes to changing the thesis font type in Adobe InDesign , there are a few things to consider. First and foremost, choosing a font that is easily readable and appropriate for academic writing is crucial. Consider the purpose of your thesis and the audience you are writing for when selecting a font.

Adobe InDesign offers a variety of font options, so take the time to explore different choices and find one that suits your needs. Once you’ve selected your font, test it on different devices and screen sizes to ensure readability. Following any specific guidelines or requirements set by your university or academic institution regarding font type and size is essential for achieving a professional-looking document.

Choosing the right font type for your dissertation can be a daunting task. However, there are some guidelines that you can follow to make the process easier. Choosing the right font for your thesis is an important aspect of your dissertation writing process. This can make or break the readability and clarity of your research paper.

Consider font size, readability, and legibility when choosing a typeface for your thesis. Ensure you maintain formatting consistency throughout the dissertation by following proper margins, line spacing, indentation, and page placement tips. Remember, the right font enhances the overall impact of your research paper.

Frequently Asked Questions

What is the best font for the thesis.

Regarding fonts for a thesis, serif fonts like Times New Roman, Georgia, and Garamond are typically the best choices as they tend to be more legible in print. It’s important to choose a font that is easy on the eyes and meets the guidelines of your academic institution. Ultimately, the font choice will depend on personal preference and the specific requirements of your thesis.

What Is The Standard Font Size For The Thesis?

The standard font size for a thesis is generally 12 points, but it’s always a good idea to check with your university or department for any specific requirements. It’s essential to maintain font size consistency throughout the document. However, selecting a legible and professional font that is easy to read is more important than the size of the font.

What Font Is Used For Phd Thesis?

No specific font is required for PhD thesis writing, but most universities have font size and style guidelines. Some popular fonts for academic writing include Times New Roman, Arial, and Calibri. It is important to choose a font that is easy to read and looks professional to ensure your thesis is well-received by readers.

Can I Use Calibri For My Thesis?

Yes, Calibri is an acceptable font for a thesis. However, it’s important to follow the guidelines provided by your academic institution or advisor regarding font type and size. Other popular fonts used in academic writing include Times New Roman and Arial. Regardless of the font you choose, proofread your thesis carefully to ensure the text is clear and legible.

How Can The Font Type Affect The Readability Of My Thesis?

The font type you choose can greatly impact the readability of your thesis. Traditional serif fonts like Times New Roman are often easier to read in printed documents. In contrast, sans-serif fonts like Arial or Calibri may be better suited for on-screen reading. Choosing a font that is easy to read and aesthetically pleasing is important, as this can make a big difference in the overall impression your thesis makes on readers.

David Egee, the visionary Founder of FontSaga, is renowned for his font expertise and mentorship in online communities. With over 12 years of formal font review experience and study of 400+ fonts, David blends reviews with educational content and scripting skills. Armed with a Bachelor’s Degree in Graphic Design and a Master’s in Typography and Type Design from California State University, David’s journey from freelance lettering artist to font Specialist and then the FontSaga’s inception reflects his commitment to typography excellence.

In the context of font reviews, David specializes in creative typography for logo design and lettering. He aims to provide a diverse range of content and resources to cater to a broad audience. His passion for typography shines through in every aspect of FontSaga, inspiring creativity and fostering a deeper appreciation for the art of lettering and calligraphy.

Related posts:

• How To Change Your iPhone Font: A Comprehensive Guide The iPhone’s default font is called San Francisco. It was designed by Apple and created by Apple’s in-house typography team, known as the Typeface team. The Typeface team is led by Jonathan Hoefler, a prominent type designer and the head...
• How To Change The Font In Latex – A Guide LaTeX is a popular document preparation system widely used in academic and scientific fields for its superior typesetting capabilities. While its default font is aesthetically pleasing and suitable for most applications, there are times when users may want to change...
• Mastering Latex Font Family With LATEX The Latex font family is a versatile tool that can create professional-looking documents with various font options. One of the key features of LaTex is the ability to use a wide range of fonts to create visually appealing documents. Here,...
• Creating A Memorable Birthday Experience With Customized Birthday Fonts Birthdays are special occasions that allow us to celebrate the life of our loved ones. From creating a perfect theme to selecting the right decor, every little detail matters when making a memorable birthday experience. One such small yet impactful...

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction
• Copyright Page
• Dedication, Acknowledgements, Preface (optional)
• Table of Contents
• List of Tables, Figures, and Illustrations
• List of Abbreviations
• List of Symbols

Non-Traditional Formats

Font type and size, spacing and indentation, tables, figures, and illustrations, formatting previously published work.

• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

II. Formatting Guidelines

All copies of a thesis or dissertation must have the following uniform margins throughout the entire document:

• Left: 1″ (or 1 1/4" to ensure sufficient room for binding the work if desired)
• Right: 1″
• Bottom: 1″ (with allowances for page numbers; see section on Pagination )
• Top: 1″

Exceptions : The first page of each chapter (including the introduction, if any) begins 2″ from the top of the page. Also, the headings on the title page, abstract, first page of the dedication/ acknowledgements/preface (if any), and first page of the table of contents begin 2″ from the top of the page.

Non-traditional theses or dissertations such as whole works comprised of digital, artistic, video, or performance materials (i.e., no written text, chapters, or articles) are acceptable if approved by your committee and graduate program. A PDF document with a title page, copyright page, and abstract at minimum are required to be submitted along with any relevant supplemental files.

Fonts must be 10, 11, or 12 points in size. Superscripts and subscripts (e.g., formulas, or footnote or endnote numbers) should be no more than 2 points smaller than the font size used for the body of the text.

Space and indent your thesis or dissertation following these guidelines:

• The text must appear in a single column on each page and be double-spaced throughout the document. Do not arrange chapter text in multiple columns.
• New paragraphs must be indicated by a consistent tab indentation throughout the entire document.
• The document text must be left-justified, not centered or right-justified.
• For blocked quotations, indent the entire text of the quotation consistently from the left margin.
• Ensure headings are not left hanging alone on the bottom of a prior page. The text following should be moved up or the heading should be moved down. This is something to check near the end of formatting, as other adjustments to text and spacing may change where headings appear on the page.

Exceptions : Blocked quotations, notes, captions, legends, and long headings must be single-spaced throughout the document and double-spaced between items.

Paginate your thesis or dissertation following these guidelines:

• Use lower case Roman numerals (ii, iii, iv, etc.) on all pages preceding the first page of chapter one. The title page counts as page i, but the number does not appear. Therefore, the first page showing a number will be the copyright page with ii at the bottom.
• Arabic numerals (beginning with 1, 2, 3, 4, etc.) start at chapter one or the introduction, if applicable. Arabic numbers must be included on all pages of the text, illustrations, notes, and any other materials that follow. Thus, the first page of chapter one will show an Arabic numeral 1, and numbering of all subsequent pages will follow in order.
• Do not use page numbers accompanied by letters, hyphens, periods, or parentheses (e.g., 1., 1-2, -1-, (1), or 1a).
• Center all page numbers at the bottom of the page, 1/2″ from the bottom edge.
• Pages must not contain running headers or footers, aside from page numbers.
• If your document contains landscape pages (pages in which the top of the page is the long side of a sheet of paper), make sure that your page numbers still appear in the same position and direction as they do on pages with standard portrait orientation for consistency. This likely means the page number will be centered on the short side of the paper and the number will be sideways relative to the landscape page text. See these additional instructions for assistance with pagination on landscape pages in Microsoft Word .

Format footnotes for your thesis or dissertation following these guidelines:

• Footnotes must be placed at the bottom of the page separated from the text by a solid line one to two inches long.
• Begin at the left page margin, directly below the solid line.
• Single-space footnotes that are more than one line long.
• Include one double-spaced line between each note.
• Most software packages automatically space footnotes at the bottom of the page depending on their length. It is acceptable if the note breaks within a sentence and carries the remainder into the footnote area of the next page. Do not indicate the continuation of a footnote.
• Number all footnotes with Arabic numerals. You may number notes consecutively within each chapter starting over with number 1 for the first note in each chapter, or you may number notes consecutively throughout the entire document.
• Footnote numbers must precede the note and be placed slightly above the line (superscripted). Leave no space between the number and the note.
• While footnotes should be located at the bottom of the page, do not place footnotes in a running page footer, as they must remain within the page margins.

Endnotes are an acceptable alternative to footnotes. Format endnotes for your thesis or dissertation following these guidelines:

• Always begin endnotes on a separate page either immediately following the end of each chapter, or at the end of your entire document. If you place all endnotes at the end of the entire document, they must appear after the appendices and before the references.
• Include the heading “ENDNOTES” in all capital letters, and center it 1″ below the top of the first page of your endnotes section(s).
• Single-space endnotes that are more than one line long.
• Number all endnotes with Arabic numerals. You may number notes consecutively within each chapter starting over with number 1 for the first note in each chapter, or you may number notes consecutively throughout the entire document.
• Endnote numbers must precede the note and be placed slightly above the line (superscripted). Leave no space between the number and the note.

Tables, figures, and illustrations vary widely by discipline. Therefore, formatting of these components is largely at the discretion of the author.

For example, headings and captions may appear above or below each of these components.

These components may each be placed within the main text of the document or grouped together in a separate section.

Space permitting, headings and captions for the associated table, figure, or illustration must be on the same page.

The use of color is permitted as long as it is consistently applied as part of the finished component (e.g., a color-coded pie chart) and not extraneous or unprofessional (e.g., highlighting intended solely to draw a reader's attention to a key phrase). The use of color should be reserved primarily for tables, figures, illustrations, and active website or document links throughout your thesis or dissertation.

The format you choose for these components must be consistent throughout the thesis or dissertation.

Ensure each component complies with margin and pagination requirements.

Refer to the List of Tables, Figures, and Illustrations section for additional information.

If your thesis or dissertation has appendices, they must be prepared following these guidelines:

• Appendices must appear at the end of the document (before references) and not the chapter to which they pertain.
• When there is more than one appendix, assign each appendix a number or a letter heading (e.g., “APPENDIX 1” or “APPENDIX A”) and a descriptive title. You may number consecutively throughout the entire work (e.g., 1, 2 or A, B), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number or letter to indicate its consecutive placement (e.g., “APPENDIX 3.2” is the second appendix referred to in Chapter Three).
• Include the chosen headings in all capital letters, and center them 1″ below the top of the page.
• All appendix headings and titles must be included in the table of contents.
• Page numbering must continue throughout your appendix or appendices. Ensure each appendix complies with margin and pagination requirements.

You are required to list all the references you consulted. For specific details on formatting your references, consult and follow a style manual or professional journal that is used for formatting publications and citations in your discipline.

Your reference pages must be prepared following these guidelines:

• If you place references after each chapter, the references for the last chapter must be placed immediately following the chapter and before the appendices.
• If you place all references at the end of the thesis or dissertation, they must appear after the appendices as the final component in the document.
• Select an appropriate heading for this section based on the style manual you are using (e.g., “REFERENCES”, “BIBLIOGRAPHY”, or “WORKS CITED”).
• Include the chosen heading in all capital letters, and center it 1″ below the top of the page.
• References must be single-spaced within each entry.
• Include one double-spaced line between each reference.
• Page numbering must continue throughout your references section. Ensure references comply with margin and pagination requirements.

In some cases, students gain approval from their academic program to include in their thesis or dissertation previously published (or submitted, in press, or under review) journal articles or similar materials that they have authored. For more information about including previously published works in your thesis or dissertation, see the section on Use of Your Own Previously Published Materials and the section on Copyrighting.

If your academic program has approved inclusion of such materials, please note that these materials must match the formatting guidelines set forth in this Guide regardless of how the material was formatted for publication.

Some specific formatting guidelines to consider include:

• Fonts, margins, chapter headings, citations, and references must all match the formatting and placement used within the rest of the thesis or dissertation.
• If appropriate, published articles can be included as separate individual chapters within the thesis or dissertation.
• A separate abstract to each chapter should not be included.
• The citation for previously published work must be included as the first footnote (or endnote) on the first page of the chapter.
• Do not include typesetting notations often used when submitting manuscripts to a publisher (i.e., insert table x here).
• The date on the title page should be the year in which your committee approves the thesis or dissertation, regardless of the date of completion or publication of individual chapters.
• If you would like to include additional details about the previously published work, this information can be included in the preface for the thesis or dissertation.

Previous: Order and Components

Next: Distribution

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page
• Table of Contents
• List of Figures (etc.)
• Acknowledgements
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

Selecting a Font (Typeface)

Be consistent in the use of font/typeface throughout your manuscript. All text material must be in the same font/typeface; all headings and figure/table titles/captions must be in a consistent typeface.

Please select a font and size that is highly legible and will reproduce clearly. Ornate or decorative fonts such as script, calligraphy, gothic, italics, or specialized art fonts are not acceptable. For electronic submissions, embedded fonts are required.

Any symbols, equations, figures, drawings, diacritical marks, or lines that cannot be typed, and therefore are drawn, must be added in permanent black ink.

Below are suggested fonts and sizes.

Establish and follow a consistent pattern for layout of all headings.  All headings should use the same font size, font weight, typeface, etc.

For example: center all major headings; place secondary headings at least two lines below major headings.

Typeface/Printing Quality (Paper Submissions Only)

If you are submitting your manuscript on paper, printer quality is critical to produce a clean, clear image. You are strongly urged to use a laser printer, as ink jet and line printers generally do not produce fully clear, legible results. Dot matrix-type printers are not acceptable.

• << Previous: Formatting Overview
• Next: Pagination, Margins, Spacing >>
• Last Updated: Feb 20, 2024 2:09 PM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

• KU Libraries
• Subject & Course Guides
• KU Thesis and Dissertation Formatting
• Fonts and Spacing

KU Thesis and Dissertation Formatting: Fonts and Spacing

• Formatting Specifics
• Title and Acceptance Pages
• Page Numbering
• Table of Contents
• List of Figures
• Rotating Charts or Tables
• Working with Footnotes
• Converting to PDF
• Embedding Fonts
• Completed KU Dissertations & Theses
• About: Survey of Earned Doctorates
• Copyright and ETD Release Form
• Resources for KUMC Students
• Thesis/Dissertation Filenames
• LaTeX/BibTeX Support

Office of Graduate Studies Thesis and Dissertation Formatting Guidelines

These rules are taken from the KU Office of Graduate Studies Thesis or Dissertation Formatting Guidelines. To see the full thesis or dissertation formatting requirements, visit https://graduate.ku.edu/submitting

• Students should use the same font size (11- or 12-point) and style (typically Times New Roman) through the thesis, including labels and references.
• Tables, captions, and footnotes should use the same font style but may be smaller in size (usually 10-point).
• Chapter and section headings may be bold and no more than 2 points larger than the text size.
• Non-standard typefaces, such as script, are generally not acceptable except for commonly used symbols.
• The Office of Graduate Studies recommends that students get their font choice approved by their department and their graduate division before the thesis defense.
• Lettering and symbols in tables and figures should be no less than 10 points.
• Normally theses and dissertations use double-spaced formatting.
• Single-spaced formatting is acceptable in the table of contents, footnotes, end notes, charts, graphs, tables, block quotations, captions, glossary, appendices and bibliography.
• Students may use singe- or one-and-a-half-spacing for the body of the text with prior written approval of their thesis committee and graduate division.

Subject Guide

• << Previous: Title and Acceptance Pages
• Next: Page Numbering >>
• Last Updated: Apr 12, 2024 11:31 AM
• URL: https://guides.lib.ku.edu/etd

• Graduate School
• Current Students
• Dissertation & Thesis Preparation

Formatting Requirements

Choice of font.

For most theses, the font should be one that is appropriate for an academic paper. Generally, the same font should be used throughout the thesis (dedication page and scholarship-appropriate alterations excepted).

Normally the font should be equivalent to 10 to 12 point font in Times New Roman or Arial for main text, and at least 2mm high in tables and figures.

Font colour should normally be black throughout, except for web links which should be blue.

• Why Grad School at UBC?
• Graduate Degree Programs
• Application & Admission
• Info Sessions
• Research Supervisors
• Research Projects
• Indigenous Students
• International Students
• Tuition, Fees & Cost of Living
• Newly Admitted
• Student Status & Classification
• Student Responsibilities
• Supervision & Advising
• Managing your Program
• Health, Wellbeing and Safety
• Professional Development
• Final Doctoral Exam
• Final Dissertation & Thesis Submission
• Life in Vancouver
• Vancouver Campus
• Graduate Student Spaces
• Graduate Life Centre
• Life as a Grad Student
• Graduate Student Ambassadors
• Meet our Students
• Award Opportunities
• Award Guidelines
• Minimum Funding Policy for PhD Students
• Killam Awards & Fellowships
• Policies & Procedures
• Information for Supervisors
• Dean's Message
• Leadership Team
• Strategic Plan & Priorities
• Vision & Mission
• Equity, Diversity & Inclusion
• Initiatives, Plans & Reports
• Graduate Education Analysis & Research
• Media Enquiries
• Newsletters
• Giving to Graduate Studies

Strategic Priorities

• Strategic Plan 2019-2024
• Improving Student Funding
• Promoting Excellence in Graduate Programs
• Enhancing Graduate Supervision
• Advancing Indigenous Inclusion
• Supporting Student Development and Success
• Reimagining Graduate Education
• Enriching the Student Experience

Initiatives

• Public Scholars Initiative
• 3 Minute Thesis (3MT)
• PhD Career Outcomes
• Great Supervisor Week

Dr. Mark Womack

What Font Should I Use?

The Modern Language Association (MLA) provides explicit, specific recommendations for the margins and spacing of academic papers. (See: Document Format .) But their advice on font selection is less precise: “Always choose an easily readable typeface (e.g. Times New Roman) in which the regular style contrasts clearly with the italic, and set it to a standard size (e.g. 12 point)” ( MLA Handbook , 7th ed., §4.2).

So which fonts are “easily readable” and have “clearly” contrasting italics? And what exactly is a “standard” size?

For academic papers, an “easily readable typeface” means a serif font, and a “standard” type size is between 10 and 12 point.

Use A Serif Font

Serifs are the tiny strokes at the end of a letter’s main strokes. Serif fonts have these extra strokes; sans serif fonts do not. ( Sans is French for “without.”) Serif fonts also vary the thickness of the letter strokes more than sans serifs, which have more uniform lines.

Books, newspapers, and magazines typically set their main text in a serif font because they make paragraphs and long stretches of text easier to read. Sans serifs (Arial, Calibri, Helvetica, Gill Sans, Verdana, and so on) work well for single lines of text, like headings or titles, but they rarely make a good choice for body text.

Moreover, most sans serifs don’t have a true italic style. Their “italics” are really just “obliques,” where the letters slant slightly to the right but keep the same shape and spacing. Most serifs, on the other hand, do have a true italic style, with distinctive letter forms and more compact spacing.

Since they’re more readable for long passages and have sharper contrast in their italics, you should always use a serif font for the text of an academic paper.

Use A Readable Type Size

The standard unit for measuring type size is the point . A point is 1 / 72 of an inch, roughly one pixel on a computer screen. The point size of a font tells you the size of the “em square” in which your computer displays each letter of the typeface. How tall or wide any given letter is depends on how the type designer drew it within the em square, thus a font’s height and width can vary greatly depending on the design of the typeface. That’s why if you set two fonts at the same point size, one usually looks bigger than the other.

Compare the following paragraphs, both set at 12 point but in different fonts:

For body text in academic papers, type sizes below 10 point are usually too small to read easily, while type sizes above 12 point tend to look oversized and bulky. So keep the text of your paper between 10 and 12 point .

Some teachers may require you to set your whole text at 12 point. Yet virtually every book, magazine, or newspaper ever printed for visually unimpaired grown-ups sets its body type smaller than 12 point. Newspapers use even smaller type sizes. The New York Times , for example, sets its body text in a perfectly legible 8.7 point font. So with proper spacing and margins, type sizes of 11 or 10 point can be quite comfortable to read.

Font Recommendations

I usually ask my students to use Century Schoolbook or Palatino for their papers. If your teacher requires you to submit your papers in a particular font, do so. (Unless they require you to use Arial , in which case drop the class.)

One thing to consider when choosing a font is how you submit your essay. When you submit a hard copy or a PDF, your reader will see the text in whatever typeface you use. Most electronic submission formats, on the other hand, can only use the fonts available on the reader’s computer. So if you submit the paper electronically, be sure to use a font your instructor has.

What follows is a list of some widely available, highly legible serif fonts well-suited for academic papers. I’ve divided them into four categories: Microsoft Word Fonts, Mac OS Fonts, Google Fonts, and Universal Fonts.

Microsoft Word Fonts

Microsoft Word comes with lots of fonts of varying quality. If your teacher asks you to submit your paper in Word format, you can safely assume they have Word and all the fonts that go with it.

Morris Fuller Benton designed Century Schoolbook in 1923 for elementary-school textbooks, so it’s a highly readable font. It’s one of the best fonts available with Microsoft Word. Because it’s so legible, U. S. Supreme Court Rule 33.1.b madates that all legal documents submitted to the Court be set in Century Schoolbook or a similar Century-style font.

Hermann Zapf designed Palatino in 1948 for titles and headings, but its elegant proportions make it a good font for body text. Named for Renaissance calligrapher Giambattista Palatino, this font has the beauty, harmony, and grace of fine handwriting. Palatino Linotype is the name of the font included with Microsoft Word; Mac OS includes a version of the same typeface called simply Palatino.

Microsoft Word includes several other fonts that can work well for academic essays: Bell MT , Californian FB , Calisto MT , Cambria , Garamond , and Goudy Old Style .

Mac OS Fonts

Apple has a well-deserved reputation for design excellence which extends to its font library. But you can’t count on any of these Mac OS fonts being on a computer that runs Windows.

Finding his inspiration in the typography of Pierre Simon Fournier, Matthew Carter designed Charter in 1987 to look good even on crappy mid-80s fax machines and printers. Its ability to hold up even in low resolution makes Charter work superbly well on screen. Bitstream released Charter under an open license, so you can add it to your font arsenal for free. You can download Charter here .

In 1991 Apple commissioned Jonathan Hoefler to design a font that could show off the Mac’s ability to handle complex typography. The result was Hoefler Text , included with every Mac since then. The bold weight of Hoefler Text on the Mac is excessively heavy, but otherwise it’s a remarkable font: compact without being cramped, formal without being stuffy, and distinctive without being obtrusive. If you have a Mac, start using it.

Other Mac OS fonts you might consider are Baskerville and Palatino .

Google Fonts

When you submit a paper using Google Docs, you can access Google’s vast library of free fonts knowing that anyone who opens it in Google Docs will have those same fonts. Unfortunately, most of those free fonts are worth exactly what you paid for them, so choose wisely.

IBM Plex is a super-family of typefaces designed by Mike Abbink and the Bold Monday type foundry for — you guessed it — IBM. Plex serif is a solid, legible font that borrows features from Janson and Bodoni in its design. Plex is, not surprisingly, a thoroughly corporate font that aims for and achieves a bland neutrality suitable for most research papers.

John Baskerville originally designed this typeface in the 1850s, employing new techniques to make sharper contrasts between thin and thick strokes in the letter forms. The crisp, elegant design has inspired dozens of subsequent versions. Libre Baskerville is based on the American Type Founder’s 1941 version, modified to make it better for on-screen reading.

Unfortunately. Google Fonts has few really good serif fonts. Some others you might consider are Crimson Pro and Spectral .

Universal Fonts

Anyone you send your document to will have these fonts because they’re built in to both Windows and Mac OS.

Matthew Carter designed Georgia in 1993 for maximum legibility on computer screens. Georgia looks very nice on web sites, but in print it can look a bit clunky, especially when set at 12 point. Like Times New Roman, it’s on every computer and is quite easy to read. The name “Georgia” comes from a tabloid headline: “Alien Heads Found in Georgia.”

Times New Roman is, for better or worse, the standard font for academic manuscripts. Many teachers require it because it’s a solid, legible, and universally available font. Stanley Morison designed it in 1931 for The Times newspaper of London, so it’s a very efficient font and legible even at very small sizes. Times New Roman is always a safe choice. But unless your instructor requires it, you should probably use something a bit less overworked.

• [email protected]

Get Instant Help From 5000+ Experts For

11 ideal fonts for dissertation writing |helpwithassignment.com.

• Dissertation

Times New Roman, Georgia, Garamond, Arial, Verdana, Cambria, Century Gothic, Constantia, and Arial Narrow are some of the ideal fonts for dissertation writing.

What is Dissertation Writing ?

In the term – Dissertation writing, the word “Dissertation” has originated from the Latin language where ‘ dissertare’ means ‘to debate’. This word was first used in the English language in around 1651 which gave us a definition to write extensively on a certain subject. It is also defined as a long piece of writing on any particular topic which you have studied.

In a dissertation writing, the writer should always choose to write with the help of using a clear font like Arial, Times New Roman, etc. They should also set perfect font sizes such are 10 to 12 also the line spacing should be done of 1.15 or 1.5 which is generally accepted as it makes the document appear more neat and tidy and allows the reader to put comments in between.

Mistakes that should be avoided while choosing the Font for dissertation writing:

• Do not choose fonts on the basis of your personal likes and dislikes. Always the writer should keep in mind that they should choose the font on the basis of the reader’s perspective as it is not easy to go through a 20 pages dissertation with a complex font.
• Always avoid using too many fonts as the write-ups become too much complicated and is also not considered well organized.
• All fonts for dissertation do not match or work together, therefore, a student should make sure that they should choose fonts which go along their write up
• Try separating the fonts of your subtitles and the paragraphs as the same fonts used might make your writing monotonous and boring for the reader.

11 Best Font for Dissertation Writing

Times new roman: most common fonts for dissertation.

This font was originally designed for Times Newspaper of London. This font has a separate and different aesthetician a formal style that is prescribed or assigned by many universities and colleges. It is also quite easy to read.

This is a serif type font designed by Matthew Carter and was founded by Microsoft Corporation. It was created and released in 1993 and 1996 respectively.

This another font which has a pleasant-looking appearance on dissertation writing and is also considered as an old-style serif typeface which was named for 16th-century Parisian engraver Claude Garamond. This font is very much popular and is used for printing books etc.

This is also a Serif style typeface commissioned by Microsoft which was designed by Steve Matteson, Robin Nicholas and Jelle Bosma in 2004. It is distributed by windows and office.

Century Gothic:

This is also designed in a sans serif typeface style and a geometric style that was released in 1991 by Monotype Imaging. 

Palatino Linotype:

This font was first released in 1949 by Stempel foundry. This serif typeface style font was designed by Hermann Zapf. It has bee also classified as old style font.

This font style is one of the commonly used font styles which is also displayed sometimes as Arial MT. It has been classified as neo-grotesque sans-serif which was released in 1982 and was designed by Robin Nicholas and Patricia Saunders.

This font style is widely used for writing dissertations or any other academic papers as they provide a very cleaned and very simple – smooth look to the paper and also to the eyes of the reader. This was designed by Matthew Carter for Microsoft Corporation.

Constantia:

This was designed by John Hudson, a serif style design that was commissioned by Microsoft. The developmental work for this writing began in 2003 and was finally released in 2006

Century schoolbook: Fonts for dissertation

It is again a serif style typeface that was designed by Linn Boyd and Morris F Benton. This belongs to the century writing font family which was released in between 1894-1923.

Arial Narrow:

This is a high style font that is available for free download for personal and commercial use. However, the free version provides all upper case and lower case with some special character and features.

Therefore above are some of the most popularly used ideal fonts for dissertation writing. Times Roman is the most chosen font styles for thesis and dissertation writing but still, it has some common drawbacks as this font was created mostly to create spaces in between the words and letters but according to some professionals, the usage of this font causes overuse of view.

Similarly, Verdana and Arial fonts for dissertation might provide a simple and clear look on the screen but on the paper, it appears a little congested and a little less formal. But still, all of these fonts discussed above are some of the most appropriate fonts which are ideally used in writing a thesis, dissertation, essays or any writing assignment given to a student in college.

HelpwithAssignment.com provides the best quality dissertation help to the students. We have a team of skilled and experienced dissertation writers who have undergone double specialization in related fields. They are capable of writing any kind of dissertation from scratch within no time.

Best features of HelpWithAssignment.com ‘s Dissertation Help

Full-time experts: All the experts at HelpwithAssignment are full time assignment help experts and are dedicated experienced professionals who devote their full time in service of the students.

Best Quality Work: We never compromise with the quality of work. That is the reason why students always prefer our assignment services. Even if the deadline is very near, we only provide the best quality papers.

Talk to Subject Experts: You can talk to subject experts regarding the update of your assignment. If you want to make some changes to the solution, then you can convey some message to the expert. 

Plagiarism-free: We know how plagiarism affects the grades of the student. We follow strict rules on plagiarism and use Turnitin to check the originality of the papers. Papers provided by our experts are 100% genuine and plagiarism-free.

Delivery before Deadline: We understand your stress related to the submission. Our experts complete assignments before the deadline and even give enough time to make last-minute changes. 

Reasonable Cost: The cost of hiring a tutor for assignment help or homework help is very reasonable. We know the financial constraints of college or university going students. Hence, our pricing has been designed keeping in view an average student’s budget in mind.

Get Instant Dissertation Writing Help

Fill up the assignment help request form on the right or drop us an email at  [email protected] . Feel free to contact our customer support on the company 24/7 Live chat or call us on 312-224-1615.

Book Your Assignment

Recent Posts

51 Top Topics for Masters Thesis in Biomedical Engineering

200+ exclusive legal thesis topics for 2024, how to write methodology in thesis, boost your thesis writing: 11 proven tips with statement examples, the ultimate guide to crafting a killer thesis statement, popular categories, get assignment help from subject matter experts.

4.7/5 rating | 10,000+ happy students | Great tutors 24/7

ONLINE TO HELP YOU 24X7

OR GET MONEY BACK!

OUT OF 38983 REVIEWS

University of South Florida

Office of Graduate Studies

Main navigation, font options.

Choose one single font, color and size to use throughout the manuscript (front matter, headings, and body), acceptable exceptions for footnotes, tables, table captions, figures and figure captions are noted below.

Font Typeface

Choose a single font (typeface) for use throughout the thesis/dissertation, with the exception of figures. You may have a different font style within figures you create or use with permission to reprint. 

Choose a common True-Type font generally found on most computers (this prevents conversion issues when converted to a PDF for publishing). Recommended choices are:

Students using LaTeX may use Computer Modern Roman.

For the primary font size, you may choose to use 10 pt., 11 pt., or 12 pt. , and must use this one chosen size throughout; with the exception of tables, figures, table captions, figure captions, and footnotes, which may (optional) be reduced to 8 pt .

In tables and figures, as well as their captions, you may go as small as 8 pt., as long as it is legible, to ensure everything fits on one page. If it is not legible, you will be asked to adjust the size.

Footnotes should be smaller than the body text, but no smaller than 8 pt.

Font Styles

Manuscripts may contain all common font styles, such as boldface, italics, and underline. The use of the style must be consistent throughout the text. Including color. We typically reserve special formats for Titles/Headings.

Graduate College

Formatting your thesis, thesis templates and support.

As you prepare your thesis for deposit, please contact our office with any questions you might have.  We can answer questions related to formatting requirements, help you assemble your manuscript, and provide technical assistance with thesis submission.  We will also provide a pre-deposit check of your thesis.  Contact Erin Kaufman ([email protected]) for more information.

Our preliminary page templates help ensure your preliminary pages are formatted correctly and include accurate information.  There is a version for PC users and a version for Mac users .  If you want your 1) chapters and subheadings automatically numbered and / or 2) table and figure captions to include the number of the chapter in which they appear, use this template .  This template relies on a multi-level list to generate automatic numbering, and it can be difficult to navigate if you are new to using Microsoft Word to format large documents.

For suggestions on how to reduce thesis file size, download our Ways to Reduce File Size handout.

For general formatting support, download the Manuscript Construction Guidelines for PC or the Manuscript Construction Guidelines for MAC .  Understanding how to use a number of basic Microsoft Word and Adobe Acrobat tools will greatly simplify the formatting and completion of your thesis.  All topics are essential to the proper construction of your thesis or dissertation. 

Required and Optional Elements

Formatting requirements, page numbers.

• Preliminary page numbers begin with a lower-case Roman numeral ii on the first page following the Title Page, or the Copyright Page should you choose to include one.  Center these page numbers in the footer, 1/2 to 1 inch above the bottom of the page.
• Manuscript text page numbers must be in Arabic with a 1 on the first page of your first chapter. They may be located in the upper or lower right-hand corner or the bottom center of the page and must be consistent throughout the manuscript.
• List your degree as it appears on MyUI.  If you have an official sub-track, you may include it in parentheses after your degree.
• List the correct month and year of your graduation.
• List the names of your committee members.  Your thesis supervisor should be listed first, followed by a comma and the phrase “Thesis Supervisor.”
• There is no page number on the Title Page.

Copyright Page

• The copyright date is the year of graduation.
• There is no page number on the Copyright Page.
• Text should be single-spaced and centered on the page, both horizontally and vertically.
• This page requires a lower-case Roman numeral page number, at the bottom center of the page.

Acknowledgements

• Text should be top-aligned, double-spaced, and with each paragraph indented.

An External Abstract is no longer required.

• A Scholarly Abstract (“Abstract”) is required for PhD and Master’s students, but not for DMA or MFA students.
• A Public Abstract (“Public Abstract”) is required for all students.
• These pages require lower-case Roman numeral page numbers, at the bottom center of the page.

Table of Contents

• All major headings from the manuscript must be included.  Entries should be consistently spaced.
• Entries here must match corresponding titles in the text, but should not carry over boldface, italics, or underlining from the text.
• Do not include entries for the preliminary pages that come before the Table of Contents.
• Do not include an entry for the Table of Contents in the Table of Contents.
• Include the List of Tables and List of Figures, if the thesis contains them.  Page numbering for these entries should be lower-case Roman numerals.
• Entries should not run into the page number column.
• Page numbers should be vertically aligned by the rightmost digit.

List of Tables / List of Figures

• Entries should be single-spaced, with a double space between them.
• Captions listed must match corresponding captions in the text, but should not carry over boldface, italics, or underlining from the text.
• The List(s) require a lower-case Roman numeral page number, at the bottom center of the page.
• Treat Appendix headings (Appendix A, B, etc.) as major headings and include them in the Table of Contents.
• If more than one Appendix is included, identify them as Appendix A, Appendix B, and so on. Lettering is unnecessary when there is only one Appendix.
• Major headings should be consistently formatted in a professional manner.
• Spacing around major headings should be consistent throughout the entire manuscript.
• Different order subheadings should each have a distinct style.
• Spacing around subheadings should be consistent.
• Headings may not be placed at the bottom of the page without at least two lines of text beneath them.

Tables and Figures

• Brief descriptive titles for tables and figures must be included in the List of Figures / List of Tables (if included).
• Tables and figures may be located above, below, or adjacent to the manuscript text.
• Gaps around tables and figures are allowed if the table or figure is larger than half a page.
• Table captions must not extend beyond the width of the table(s) being described.
• Spacing between a caption and its corresponding table / figure should be consistent.
• Tables / figures that appear in an Appendix must have their own numbering system (A.1, A.2, etc.).
• If a table or figure continues to one or more following pages, the number with a “continued” notation (e.g. Table 3—continued) is placed on each page after the first.  The descriptive title is not repeated in part or full on continuation pages. A separation line is not required.

References / Bibliography

• The References heading should be treated as a major heading and included in the Table of Contents.
• References should be single-spaced, and indenting conventions should be consistent.
• There may be a single- or double-space between entries.
• References may be placed at the end of each chapter or at the end of the manuscript.
• Entries should not break across a page.

Margins 

• Margins must be a minimum of 1 inch on all sides and on all pages, including the Preliminary Pages.
• Margins should be consistent throughout the entire text.

Line Spacing

• Line spacing may be either 1.5 or double-spaced. Line spacing should be consistent throughout.
• Use 10–12-point font for the body of the manuscript.  Font smaller than 8-point is not allowed.
• You may use 12-point font for major headings.  Font larger than this may be used sparingly, if at all.
• A range of font styles is acceptable, but font styles and sizes should be professional in appearance.

The Thesis Project

The Thesis superfamily was first published in 1994 as part of the FontFont collection, and became part of the LucasFonts type library in 2000. The family was conceived as a versatile typographic system of ambitious scope. It grew out of a dissatisfaction with the limited range of good typefaces available for corporate identity projects. Thesis aims to fill that gap by providing the user with three compatible styles – TheSans , TheMix and TheSerif  – in an optically harmonious range of eight weights, including real italics for each weight.

Thesis pioneered the concept of the all-purpose type system or superfamily which has since become such an important tool for the discerning typographer.

The Thesis family has been expanded over the years. TheSans and TheMix are now available in three widths: Normal, Condensed and SemiCondensed. In addition, three ultra-narrow widths for TheSans are available on demand.

TheSans offers several sub-families for specialized uses:

• TheSans Mono A monospaced series for computer coding and similar uses.
• TheSans Hair A carefully balanced series of seven hairline weights for ultralight magazine and advertising headlines.
• TheSans Typewriter A set of four typewriter-like fonts.
• TheSans Arabic The Arabic-speaking version of TheSans.

• Central and Eastern European
• Cyrillic (including Bulgarian Cyrilic)
• Latin Extended (including Vietnamese)

We use cookies to ensure you get the best experience on our website. Read our Privacy Policy .

• Latest News
• Inside DELTA
• Online Education
• Students and Alumni
• Academic Technology
• Tools and Tips
• WolfWare News
• WolfWare Outreach
• Instructional Innovation
• Course Quality
• DELTA Grants
• DELTA Express Grants
• Faculty Fellows Features

Choosing an Accessible Font

May Accessibility Tip

Choosing a highly readable, accessible font benefits everyone, and especially those with dyslexia or low vision. You may know that fancy, very stylized, and script-like text is less readable, but what else? 

Readability and accessibility depends on many things, including:

• How distinct the different letters are (watch out for letter pairs that are mirror images, like d/b and q/p).
• How simple they are to process, either alone or when they are grouped into a word.
• How much spacing there is between the letters and lines of text. 
• The size of the text.

WebAIM lists the most accessible typefaces as Tahoma, Calibri, Helvetica, Arial, Verdana, and Times New Roman. Good practice is to choose widely accessible typefaces over less common ones.

• DELTA Front Page
• accessibility tip

More From DELTA News

Finish Strong: Reflecting and Planning Ahead 

New Learning Community: AI in Teaching and Learning 

DELTA and Office for Faculty Excellence Announce: Ungrading Implementation - Learning Community