thesis statement engineering

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

Developing Strong Thesis Statements

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

The thesis statement or main claim must be debatable

An argumentative or persuasive piece of writing must begin with a debatable thesis or claim. In other words, the thesis must be something that people could reasonably have differing opinions on. If your thesis is something that is generally agreed upon or accepted as fact then there is no reason to try to persuade people.

Example of a non-debatable thesis statement:

This thesis statement is not debatable. First, the word pollution implies that something is bad or negative in some way. Furthermore, all studies agree that pollution is a problem; they simply disagree on the impact it will have or the scope of the problem. No one could reasonably argue that pollution is unambiguously good.

Example of a debatable thesis statement:

This is an example of a debatable thesis because reasonable people could disagree with it. Some people might think that this is how we should spend the nation's money. Others might feel that we should be spending more money on education. Still others could argue that corporations, not the government, should be paying to limit pollution.

Another example of a debatable thesis statement:

In this example there is also room for disagreement between rational individuals. Some citizens might think focusing on recycling programs rather than private automobiles is the most effective strategy.

The thesis needs to be narrow

Although the scope of your paper might seem overwhelming at the start, generally the narrower the thesis the more effective your argument will be. Your thesis or claim must be supported by evidence. The broader your claim is, the more evidence you will need to convince readers that your position is right.

Example of a thesis that is too broad:

There are several reasons this statement is too broad to argue. First, what is included in the category "drugs"? Is the author talking about illegal drug use, recreational drug use (which might include alcohol and cigarettes), or all uses of medication in general? Second, in what ways are drugs detrimental? Is drug use causing deaths (and is the author equating deaths from overdoses and deaths from drug related violence)? Is drug use changing the moral climate or causing the economy to decline? Finally, what does the author mean by "society"? Is the author referring only to America or to the global population? Does the author make any distinction between the effects on children and adults? There are just too many questions that the claim leaves open. The author could not cover all of the topics listed above, yet the generality of the claim leaves all of these possibilities open to debate.

Example of a narrow or focused thesis:

In this example the topic of drugs has been narrowed down to illegal drugs and the detriment has been narrowed down to gang violence. This is a much more manageable topic.

We could narrow each debatable thesis from the previous examples in the following way:

Narrowed debatable thesis 1:

This thesis narrows the scope of the argument by specifying not just the amount of money used but also how the money could actually help to control pollution.

Narrowed debatable thesis 2:

This thesis narrows the scope of the argument by specifying not just what the focus of a national anti-pollution campaign should be but also why this is the appropriate focus.

Qualifiers such as " typically ," " generally ," " usually ," or " on average " also help to limit the scope of your claim by allowing for the almost inevitable exception to the rule.

Types of claims

Claims typically fall into one of four categories. Thinking about how you want to approach your topic, or, in other words, what type of claim you want to make, is one way to focus your thesis on one particular aspect of your broader topic.

Claims of fact or definition: These claims argue about what the definition of something is or whether something is a settled fact. Example:

Claims of cause and effect: These claims argue that one person, thing, or event caused another thing or event to occur. Example:

Claims about value: These are claims made of what something is worth, whether we value it or not, how we would rate or categorize something. Example:

Claims about solutions or policies: These are claims that argue for or against a certain solution or policy approach to a problem. Example:

Which type of claim is right for your argument? Which type of thesis or claim you use for your argument will depend on your position and knowledge of the topic, your audience, and the context of your paper. You might want to think about where you imagine your audience to be on this topic and pinpoint where you think the biggest difference in viewpoints might be. Even if you start with one type of claim you probably will be using several within the paper. Regardless of the type of claim you choose to utilize it is key to identify the controversy or debate you are addressing and to define your position early on in the paper.

While Sandel argues that pursuing perfection through genetic engineering would decrease our sense of humility, he claims that the sense of solidarity we would lose is also important.

This thesis summarizes several points in Sandel’s argument, but it does not make a claim about how we should understand his argument. A reader who read Sandel’s argument would not also need to read an essay based on this descriptive thesis.  

Broad thesis (arguable, but difficult to support with evidence) 

Michael Sandel’s arguments about genetic engineering do not take into consideration all the relevant issues.

This is an arguable claim because it would be possible to argue against it by saying that Michael Sandel’s arguments do take all of the relevant issues into consideration. But the claim is too broad. Because the thesis does not specify which “issues” it is focused on—or why it matters if they are considered—readers won’t know what the rest of the essay will argue, and the writer won’t know what to focus on. If there is a particular issue that Sandel does not address, then a more specific version of the thesis would include that issue—hand an explanation of why it is important.  

Arguable thesis with analytical claim 

While Sandel argues persuasively that our instinct to “remake” (54) ourselves into something ever more perfect is a problem, his belief that we can always draw a line between what is medically necessary and what makes us simply “better than well” (51) is less convincing.

This is an arguable analytical claim. To argue for this claim, the essay writer will need to show how evidence from the article itself points to this interpretation. It’s also a reasonable scope for a thesis because it can be supported with evidence available in the text and is neither too broad nor too narrow.  

Arguable thesis with normative claim 

Given Sandel’s argument against genetic enhancement, we should not allow parents to decide on using Human Growth Hormone for their children.

This thesis tells us what we should do about a particular issue discussed in Sandel’s article, but it does not tell us how we should understand Sandel’s argument.  

Questions to ask about your thesis 

• Is the thesis truly arguable? Does it speak to a genuine dilemma in the source, or would most readers automatically agree with it?  
• Is the thesis too obvious? Again, would most or all readers agree with it without needing to see your argument?  
• Is the thesis complex enough to require a whole essay's worth of argument?  
• Is the thesis supportable with evidence from the text rather than with generalizations or outside research?  
• Would anyone want to read a paper in which this thesis was developed? That is, can you explain what this paper is adding to our understanding of a problem, question, or topic?
• picture_as_pdf Thesis

• Planet Earth
• Strange News

How To Write An Engineering Thesis

Table of Contents:

Theses and Dissertations . Discussion of theses and dissertations in the Writing Guidelines for Engineering and Science Students: guidelines to help students of science and engineering make their writing more efficient for others to read and to make the process of writing more efficient for them to perform.

In engineering and science, a thesis or dissertation is the culmination of a master’s or Ph. D. degree. A thesis or dissertation presents the research that the student performed for that degree. From the student’s perspective, the primary purpose of a thesis or dissertation is to persuade the student’s committee that he or she has performed and communicated research worthy of the degree. In other words, the main purpose of the thesis or dissertation is to help the student secure the degree. From the perspective of the engineering and scientific community, the primary purpose is to document the student’s research. Although much research from theses and dissertations is also communicated in journal articles, theses and dissertations stand as detailed documents that allow others to see what the work was and how it was performed. For that reason, theses and dissertations are often read by other graduate students, especially those working in the research group of the authoring student. This web page presents some format and stylistic suggestions for writing theses and dissertations.

Video advice: Introduction to MSc Thesis Writing at DTU Civil Engineering

Dissertation/Thesis Instructions

Students completing their degree with a Dissertation or an MS Thesis must adhere to the deadlines below for final MS Thesis/Dissertation submission to the Graduate School of Engineering for the intended date of degree conferral. Northeastern University requires that students publish their Dissertation or Thesis with Proquest Dissertation Publishing. Whereas students previously completed this task by submitting a hard copy of the Dissertation or Thesis to Snell Library, you must now self-publish using the Northeastern University Proquest/ETD Administrator Site.

Home / Academics & Experiential Learning/Graduate School of Engineering/Graduate Student Services/Dissertation/Thesis InstructionsStudents completing their degree with a Dissertation or an MS Thesis must adhere to the deadlines below for final MS Thesis/Dissertation submission to the Graduate School of Engineering for the intended date of degree conferral. Northeastern University requires that students publish their Dissertation or Thesis with Proquest Dissertation Publishing. Whereas students previously completed this task by submitting a hard copy of the Dissertation or Thesis to Snell Library, you must now self-publish using the Northeastern University Proquest/ETD Administrator Site. Please click the link for the Guidelines below. COE Guide to the Preparation and Submission of Theses and DissertationsCOE Style Guide for Theses and DissertationsPublishing GuidelinesLaTex TemplatesDue to COVID-19, the Graduate School of Engineering is not currently requiring students to submit a physical hard copy document of their PhD Dissertation of MS Thesis to our office.

Video advice: ENGINEERING THESIS [ENG SUB] DETAILED TIPS & ADVICES

Hi guys, I am Jamie Despe and I will be giving tips and advices regarding Engineering Thesis.

Guide for Preparation of Theses/Dissertations

Steps to Submit Your Thesis/Dissertation Defense & revision: The thesis, dissertation, or senior honors thesis must be successfully defended before the faculty committee, and the student should make any required revisions. You must also pass the formatting of the manuscript by Miranda Vernon-Harrison.

Once approved by the college, PhD students, Master thesis students, and Honors thesis students must (1) schedule an appointment to submit your final, printed copies for binding to Miranda Vernon-Harrison (Engineering Building 2, E421) (2) email the signed Thesis/Dissertation Approval Form to mavernon-harrison (at) uh. edu. Please cc: this e-mail to your committee chair and graduate advisor.

• Steps to Submit Your Thesis/Dissertation
• Updates for Theses and Dissertations
• Resources for Preparation of Theses and Dissertations
• Cullen College of Engineering: Thesis & Dissertation Submission and Binding Requirements
• BS Honors Thesis Requirements
• MS Thesis and Dissertation Two Step Submission Process:
• Information for All Thesis / Dissertation Students (BS, MS, PhD)
• Early Submission of Thesis or Dissertation (For students who have missed the previous semester’s deadline)

The College of Engineering requires that a bound copy of each thesis/dissertation/senior honors thesis be presented to the student’s department and committee chair, unless the committee chair emails Miranda Vernon-Harrison stating otherwise. Email Miranda Vernon-Harrison (mavernon-harrison (at) uh. edu) to schedule an appointment to drop off your printed hardcopies for binding at the Engineering Building 2, E421. The document should be printed prior to dropping off. The student will need to print single-sided on a minimum of 25% white cotton paper. The weight of the paper should be at least 20 lb. (Details on paper requirements) The student’s myUH account will be charged for binding. *The student can also submit binding for personal copies. Binding will be returned back to Miranda Vernon-Harrison for distribution.

Top 7 Tips for Writing a Master’s Thesis in Engineering – “I would rather tolerate a scream than completing endless tiring thesis!”

The theme of your dissertation writing can also be selected by your leader or governing head of the organization. A group of these research works basically contains 4-5 people in it. It is totally a formal script which needs to be done in the said time and must not contain any grammatical or conceptual mistake.

• How It Works
• Customer Reviews

Video advice: HOW TO WRITE FIRST CLASS DISSERTATION/THESIS (Engineering/Science)

Trying to achieve a first class dissertation/thesis? This video will show you how! If you study engineering or science this will be particularly useful, but it will still be helpful for other topics. This video will talk you through all of the steps and give you helpful tips I learned along the way.

How do you write a thesis for engineering?

Important goals of your thesis are: 1) to review the relevant background in your specific subfield field ; 2) to describe how your work fits into the larger scientific context; 3) to clearly describe your experimental measurements and data 4) to demonstrate your independence and mastery of technical engineering depth; ...

What is a thesis for engineering?

In engineering and science, a thesis or dissertation is the culmination of a master's or Ph. D. degree . A thesis or dissertation presents the research that the student performed for that degree.

How do you write an introduction for an engineering thesis?

Stages in a thesis introduction

• state the general topic and give some background.
• provide a review of the literature related to the topic.
• define the terms and scope of the topic.
• outline the current situation.
• evaluate the current situation (advantages/ disadvantages) and identify the gap.

Do engineers do a thesis?

UNSW Engineering students are required to complete an undergraduate thesis project during the 4th year of their study . Students can choose from a variety of projects, with research and industry thesis options available.

What is an example of a thesis statement?

Example: To make a peanut butter and jelly sandwich, you must procure the ingredients, find a knife, and spread the condiments . This thesis showed the reader the topic (a type of sandwich) and the direction the essay will take (describing how the sandwich is made).

Related Articles:

• How Do You Write An Engineering Resume
• How To Write A Resume For Engineering
• How To Write A Journal Paper In Engineering
• How To Write An Executive Summary Engineering
• How To Write Civil Engineering Resume
• How To Write Objective In Resume For Engineering Job

Science Journalist

Science atlas, our goal is to spark the curiosity that exists in all of us. We invite readers to visit us daily, explore topics of interest, and gain new perspectives along the way.

You may also like

Why Are Rare Earth Magnets So Strong

Where Is Cerulean Robotics In Freeside

Can Mass Flow Rate Be Negative In Thermodynamics

Add comment, cancel reply.

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Recent discoveries

Why Did God Put Us Here On Earth

What Are The Units For Velocity In Physics

How Does Religion And Science Relate

What Is Sedimentation Rate Geology

• Animals 3041
• Astronomy 8
• Biology 2281
• Chemistry 482
• Culture 1333
• Health 8466
• History 2152
• Physics 913
• Planet Earth 3239
• Science 2158
• Strange News 1230
• Technology 3625

Random fact

How Can We Discover Alien Existence? Harness All NASA Missions, New Report States

25 Thesis Statement Examples

A thesis statement is needed in an essay or dissertation . There are multiple types of thesis statements – but generally we can divide them into expository and argumentative. An expository statement is a statement of fact (common in expository essays and process essays) while an argumentative statement is a statement of opinion (common in argumentative essays and dissertations). Below are examples of each.

Strong Thesis Statement Examples

1. School Uniforms

“Mandatory school uniforms should be implemented in educational institutions as they promote a sense of equality, reduce distractions, and foster a focused and professional learning environment.”

Best For: Argumentative Essay or Debate

Read More: School Uniforms Pros and Cons

2. Nature vs Nurture

“This essay will explore how both genetic inheritance and environmental factors equally contribute to shaping human behavior and personality.”

Best For: Compare and Contrast Essay

Read More: Nature vs Nurture Debate

3. American Dream

“The American Dream, a symbol of opportunity and success, is increasingly elusive in today’s socio-economic landscape, revealing deeper inequalities in society.”

Best For: Persuasive Essay

Read More: What is the American Dream?

4. Social Media

“Social media has revolutionized communication and societal interactions, but it also presents significant challenges related to privacy, mental health, and misinformation.”

Best For: Expository Essay

Read More: The Pros and Cons of Social Media

5. Globalization

“Globalization has created a world more interconnected than ever before, yet it also amplifies economic disparities and cultural homogenization.”

Read More: Globalization Pros and Cons

6. Urbanization

“Urbanization drives economic growth and social development, but it also poses unique challenges in sustainability and quality of life.”

Read More: Learn about Urbanization

7. Immigration

“Immigration enriches receiving countries culturally and economically, outweighing any perceived social or economic burdens.”

Read More: Immigration Pros and Cons

8. Cultural Identity

“In a globalized world, maintaining distinct cultural identities is crucial for preserving cultural diversity and fostering global understanding, despite the challenges of assimilation and homogenization.”

Best For: Argumentative Essay

Read More: Learn about Cultural Identity

9. Technology

“Medical technologies in care institutions in Toronto has increased subjcetive outcomes for patients with chronic pain.”

Best For: Research Paper

10. Capitalism vs Socialism

“The debate between capitalism and socialism centers on balancing economic freedom and inequality, each presenting distinct approaches to resource distribution and social welfare.”

11. Cultural Heritage

“The preservation of cultural heritage is essential, not only for cultural identity but also for educating future generations, outweighing the arguments for modernization and commercialization.”

12. Pseudoscience

“Pseudoscience, characterized by a lack of empirical support, continues to influence public perception and decision-making, often at the expense of scientific credibility.”

Read More: Examples of Pseudoscience

13. Free Will

“The concept of free will is largely an illusion, with human behavior and decisions predominantly determined by biological and environmental factors.”

Read More: Do we have Free Will?

14. Gender Roles

“Traditional gender roles are outdated and harmful, restricting individual freedoms and perpetuating gender inequalities in modern society.”

Read More: What are Traditional Gender Roles?

15. Work-Life Ballance

“The trend to online and distance work in the 2020s led to improved subjective feelings of work-life balance but simultaneously increased self-reported loneliness.”

Read More: Work-Life Balance Examples

16. Universal Healthcare

“Universal healthcare is a fundamental human right and the most effective system for ensuring health equity and societal well-being, outweighing concerns about government involvement and costs.”

Read More: The Pros and Cons of Universal Healthcare

17. Minimum Wage

“The implementation of a fair minimum wage is vital for reducing economic inequality, yet it is often contentious due to its potential impact on businesses and employment rates.”

Read More: The Pros and Cons of Raising the Minimum Wage

18. Homework

“The homework provided throughout this semester has enabled me to achieve greater self-reflection, identify gaps in my knowledge, and reinforce those gaps through spaced repetition.”

Best For: Reflective Essay

Read More: Reasons Homework Should be Banned

19. Charter Schools

“Charter schools offer alternatives to traditional public education, promising innovation and choice but also raising questions about accountability and educational equity.”

Read More: The Pros and Cons of Charter Schools

20. Effects of the Internet

“The Internet has drastically reshaped human communication, access to information, and societal dynamics, generally with a net positive effect on society.”

Read More: The Pros and Cons of the Internet

21. Affirmative Action

“Affirmative action is essential for rectifying historical injustices and achieving true meritocracy in education and employment, contrary to claims of reverse discrimination.”

Best For: Essay

Read More: Affirmative Action Pros and Cons

22. Soft Skills

“Soft skills, such as communication and empathy, are increasingly recognized as essential for success in the modern workforce, and therefore should be a strong focus at school and university level.”

Read More: Soft Skills Examples

23. Moral Panic

“Moral panic, often fueled by media and cultural anxieties, can lead to exaggerated societal responses that sometimes overlook rational analysis and evidence.”

Read More: Moral Panic Examples

24. Freedom of the Press

“Freedom of the press is critical for democracy and informed citizenship, yet it faces challenges from censorship, media bias, and the proliferation of misinformation.”

Read More: Freedom of the Press Examples

25. Mass Media

“Mass media shapes public opinion and cultural norms, but its concentration of ownership and commercial interests raise concerns about bias and the quality of information.”

Best For: Critical Analysis

Read More: Mass Media Examples

Checklist: How to use your Thesis Statement

✅ Position: If your statement is for an argumentative or persuasive essay, or a dissertation, ensure it takes a clear stance on the topic. ✅ Specificity: It addresses a specific aspect of the topic, providing focus for the essay. ✅ Conciseness: Typically, a thesis statement is one to two sentences long. It should be concise, clear, and easily identifiable. ✅ Direction: The thesis statement guides the direction of the essay, providing a roadmap for the argument, narrative, or explanation. ✅ Evidence-based: While the thesis statement itself doesn’t include evidence, it sets up an argument that can be supported with evidence in the body of the essay. ✅ Placement: Generally, the thesis statement is placed at the end of the introduction of an essay.

Try These AI Prompts – Thesis Statement Generator!

One way to brainstorm thesis statements is to get AI to brainstorm some for you! Try this AI prompt:

💡 AI PROMPT FOR EXPOSITORY THESIS STATEMENT I am writing an essay on [TOPIC] and these are the instructions my teacher gave me: [INSTUCTIONS]. I want you to create an expository thesis statement that doesn’t argue a position, but demonstrates depth of knowledge about the topic.

💡 AI PROMPT FOR ARGUMENTATIVE THESIS STATEMENT I am writing an essay on [TOPIC] and these are the instructions my teacher gave me: [INSTRUCTIONS]. I want you to create an argumentative thesis statement that clearly takes a position on this issue.

💡 AI PROMPT FOR COMPARE AND CONTRAST THESIS STATEMENT I am writing a compare and contrast essay that compares [Concept 1] and [Concept2]. Give me 5 potential single-sentence thesis statements that remain objective.

Chris Drew (PhD)

Dr. Chris Drew is the founder of the Helpful Professor. He holds a PhD in education and has published over 20 articles in scholarly journals. He is the former editor of the Journal of Learning Development in Higher Education. [Image Descriptor: Photo of Chris]

• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ 5 Top Tips for Succeeding at University
• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ 50 Durable Goods Examples
• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ 100 Consumer Goods Examples
• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ 30 Globalization Pros and Cons

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation

Prize-Winning Thesis and Dissertation Examples

Published on September 9, 2022 by Tegan George . Revised on July 18, 2023.

It can be difficult to know where to start when writing your thesis or dissertation . One way to come up with some ideas or maybe even combat writer’s block is to check out previous work done by other students on a similar thesis or dissertation topic to yours.

This article collects a list of undergraduate, master’s, and PhD theses and dissertations that have won prizes for their high-quality research.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Award-winning undergraduate theses, award-winning master’s theses, award-winning ph.d. dissertations, other interesting articles.

University : University of Pennsylvania Faculty : History Author : Suchait Kahlon Award : 2021 Hilary Conroy Prize for Best Honors Thesis in World History Title : “Abolition, Africans, and Abstraction: the Influence of the “Noble Savage” on British and French Antislavery Thought, 1787-1807”

University : Columbia University Faculty : History Author : Julien Saint Reiman Award : 2018 Charles A. Beard Senior Thesis Prize Title : “A Starving Man Helping Another Starving Man”: UNRRA, India, and the Genesis of Global Relief, 1943-1947

University: University College London Faculty: Geography Author: Anna Knowles-Smith Award:  2017 Royal Geographical Society Undergraduate Dissertation Prize Title:  Refugees and theatre: an exploration of the basis of self-representation

University: University of Washington Faculty:  Computer Science & Engineering Author: Nick J. Martindell Award: 2014 Best Senior Thesis Award Title:  DCDN: Distributed content delivery for the modern web

The only proofreading tool specialized in correcting academic writing - try for free!

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Try for free

University:  University of Edinburgh Faculty:  Informatics Author:  Christopher Sipola Award:  2018 Social Responsibility & Sustainability Dissertation Prize Title:  Summarizing electricity usage with a neural network

University:  University of Ottawa Faculty:  Education Author:  Matthew Brillinger Award:  2017 Commission on Graduate Studies in the Humanities Prize Title:  Educational Park Planning in Berkeley, California, 1965-1968

University:  University of Ottawa Faculty: Social Sciences Author:  Heather Martin Award:  2015 Joseph De Koninck Prize Title:  An Analysis of Sexual Assault Support Services for Women who have a Developmental Disability

University : University of Ottawa Faculty : Physics Author : Guillaume Thekkadath Award : 2017 Commission on Graduate Studies in the Sciences Prize Title : Joint measurements of complementary properties of quantum systems

University:  London School of Economics Faculty: International Development Author: Lajos Kossuth Award:  2016 Winner of the Prize for Best Overall Performance Title:  Shiny Happy People: A study of the effects income relative to a reference group exerts on life satisfaction

University : Stanford University Faculty : English Author : Nathan Wainstein Award : 2021 Alden Prize Title : “Unformed Art: Bad Writing in the Modernist Novel”

University : University of Massachusetts at Amherst Faculty : Molecular and Cellular Biology Author : Nils Pilotte Award : 2021 Byron Prize for Best Ph.D. Dissertation Title : “Improved Molecular Diagnostics for Soil-Transmitted Molecular Diagnostics for Soil-Transmitted Helminths”

University:  Utrecht University Faculty:  Linguistics Author:  Hans Rutger Bosker Award: 2014 AVT/Anéla Dissertation Prize Title:  The processing and evaluation of fluency in native and non-native speech

University: California Institute of Technology Faculty: Physics Author: Michael P. Mendenhall Award: 2015 Dissertation Award in Nuclear Physics Title: Measurement of the neutron beta decay asymmetry using ultracold neutrons

University:  Stanford University Faculty: Management Science and Engineering Author:  Shayan O. Gharan Award:  Doctoral Dissertation Award 2013 Title:   New Rounding Techniques for the Design and Analysis of Approximation Algorithms

University: University of Minnesota Faculty: Chemical Engineering Author: Eric A. Vandre Award:  2014 Andreas Acrivos Dissertation Award in Fluid Dynamics Title: Onset of Dynamics Wetting Failure: The Mechanics of High-speed Fluid Displacement

University: Erasmus University Rotterdam Faculty: Marketing Author: Ezgi Akpinar Award: McKinsey Marketing Dissertation Award 2014 Title: Consumer Information Sharing: Understanding Psychological Drivers of Social Transmission

University: University of Washington Faculty: Computer Science & Engineering Author: Keith N. Snavely Award:  2009 Doctoral Dissertation Award Title: Scene Reconstruction and Visualization from Internet Photo Collections

University:  University of Ottawa Faculty:  Social Work Author:  Susannah Taylor Award: 2018 Joseph De Koninck Prize Title:  Effacing and Obscuring Autonomy: the Effects of Structural Violence on the Transition to Adulthood of Street Involved Youth

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Survivorship bias
• Self-serving bias
• Availability heuristic
• Halo effect
• Hindsight bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, July 18). Prize-Winning Thesis and Dissertation Examples. Scribbr. Retrieved April 15, 2024, from https://www.scribbr.com/dissertation/examples/

Is this article helpful?

Tegan George

Other students also liked, how to choose a dissertation topic | 8 steps to follow, checklist: writing a dissertation, thesis & dissertation database examples, what is your plagiarism score.

ScholarWorks@UMass Amherst

Home > Engineering > MIE > ME_THESES

Mechanical Engineering Masters Theses Collection

Theses from 2024 2024.

TECHNICAL EVALUATION OF FLOATING OFFSHORE WIND PLANTS AND INSTALLATION OPERATIONS , CENGIZHAN CENGIZ, Mechanical Engineering

Heat Transfer Enhacement of Latent Heat Thermal Enery Storage , Joe Hatem T. Saba, Mechanical Engineering

Theses from 2023 2023

Device Design for Inducing Aneurysm-Susceptible Flow Conditions Onto Endothelial Cells , hans f. foelsche, Mechanical Engineering

Thermal Conductivity and Mechanical Properties of Interlayer-Bonded Graphene Bilayers , Afnan Mostafa, Mechanical Engineering

Wind-Wave Misalignment Effects on Multiline Anchor Systems for Floating Offshore Wind Turbines , Doron T. Rose, Mechanical Engineering

Theses from 2022 2022

A Simplified Fluid Dynamics Model of Ultrafiltration , Christopher Cardimino, Mechanical Engineering

Local Nanomechanical Variations of Cold-sprayed Tantalum Coatings , Dhrubajyoti Chowdhury, Mechanical Engineering

Aerodynamically Augmented Air-Hockey Pucks , Madhukar Prasad, Mechanical Engineering

Analysis of Low-Induction Rotors for Increased Power Production , Jack E. Rees, Mechanical Engineering

Application of the New IEC International Design Standard for Offshore Wind Turbines to a Reference Site in the Massachusetts Offshore Wind Energy Area , Samuel C. Roach, Mechanical Engineering

Applications of Thermal Energy Storage with Electrified Heating and Cooling , Erich Ryan, Mechanical Engineering

Theses from 2021 2021

Design and Testing of a Foundation Raised Oscillating Surge Wave Energy Converter , Jacob R. Davis, Mechanical Engineering

Wind Turbine Power Production Estimation for Better Financial Agreements , Shanon Fan, Mechanical Engineering

Finite Element Analysis of Impact and Cohesion of Cold Sprayed Particles onto Non-Planar Surfaces , Zhongkui Liu, Mechanical Engineering

Mechanical Design and Analysis: High-Precision Microcontact Printhead for Roll-to-Roll Printing of Flexible Electronics , Mehdi Riza, Mechanical Engineering

Jet Breakup Dynamics of Inkjet Printing Fluids , Kashyap Sundara Rajan, Mechanical Engineering

Ground Source Heat Pumps: Considerations for Large Facilities in Massachusetts , Eric Wagner, Mechanical Engineering

Theses from 2020 2020

Modeling of Electrical Grid Systems to Evaluate Sustainable Electricity Generation in Pakistan , Muhammad Mustafa Amjad, Mechanical Engineering

A Study on Latent Thermal Energy Storage (LTES) using Phase Change Materials (PCMs) 2020 , Ritvij Dixit, Mechanical Engineering

SunDown: Model-driven Per-Panel Solar Anomaly Detection for Residential Arrays , Menghong Feng, Mechanical Engineering

Nozzle Clogging Prevention and Analysis in Cold Spray , Alden Foelsche, Mechanical Engineering

Short Term Energy Forecasting for a Microgird Load using LSTM RNN , Akhil Soman, Mechanical Engineering

Optimization of Thermal Energy Storage Sizing Using Thermodynamic Analysis , Andrew Villanueva, Mechanical Engineering

Fabrication of Binder-Free Electrodes Based on Graphene Oxide with CNT for Decrease of Resistance , Di Zhang, Mechanical Engineering

Theses from 2019 2019

Computational Fluid Dynamics Models of Electromagnetic Levitation Experiments in Reduced Gravity , Gwendolyn Bracker, Mechanical Engineering

Forecasting the Cost of Electricity Generated by Offshore Wind Turbines , Timothy Costa, Mechanical Engineering

Optical-Fiber-Based Laser-Induced Cavitation for Dynamic Mechanical Characterization of Soft Materials , Qian Feng, Mechanical Engineering

On the Fuel Spray Applications of Multi-Phase Eulerian CFD Techniques , Gabriel Lev Jacobsohn, Mechanical Engineering

Topology Network Optimization of Facility Planning and Design Problems , Ravi Ratan Raj Monga, Mechanical Engineering

The Promise of VR Headsets: Validation of a Virtual Reality Headset-Based Driving Simulator for Measuring Drivers’ Hazard Anticipation Performance , Ganesh Pai Mangalore, Mechanical Engineering

Ammonia Production from a Non-Grid Connected Floating Offshore Wind-Farm: A System-Level Techno-Economic Review , Vismay V. Parmar, Mechanical Engineering

Calculation of Scalar Isosurface Area and Applications , Kedar Prashant Shete, Mechanical Engineering

Theses from 2018 2018

Electroplating of Copper on Tungsten Powder , Richard Berdos, Mechanical Engineering

A NUMERICAL FLUTTER PREDICTOR FOR 3D AIRFOILS USING THE ONERA DYNAMIC STALL MODEL , Pieter Boersma, Mechanical Engineering

Streamwise Flow-Induced Oscillations of Bluff Bodies - The Influence of Symmetry Breaking , Tyler Gurian, Mechanical Engineering

Thermal Radiation Measurement and Development of Tunable Plasmonic Thermal Emitter Using Strain-induced Buckling in Metallic Layers , Amir Kazemi-Moridani, Mechanical Engineering

Restructuring Controllers to Accommodate Plant Nonlinearities , Kushal Sahare, Mechanical Engineering

Application and Evaluation of Lighthouse Technology for Precision Motion Capture , Soumitra Sitole, Mechanical Engineering

High Strain Rate Dynamic Response of Aluminum 6061 Micro Particles at Elevated Temperatures and Varying Oxide Thicknesses of Substrate Surface , Carmine Taglienti, Mechanical Engineering

The Effects of Mechanical Loading and Tumor Factors on Osteocyte Dendrite Formation , Wenbo Wang, Mechanical Engineering

Microenvironment Regulates Fusion of Breast Cancer Cells , Peiran Zhu, Mechanical Engineering

Design for Sustainability through a Life Cycle Assessment Conceptual Framework Integrated within Product Lifecycle Management , Renpeng Zou, Mechanical Engineering

Theses from 2017 2017

Improving the Efficiency of Wind Farm Turbines using External Airfoils , Shujaut Bader, Mechanical Engineering

Evaluation Of Impedance Control On A Powered Hip Exoskeleton , Punith condoor, Mechanical Engineering

Experimental Study on Viscoelastic Fluid-Structure Interactions , Anita Anup Dey, Mechanical Engineering

BMI, Tumor Lesion and Probability of Femur Fracture: a Probabilistic Biomechanics Approach , Zhi Gao, Mechanical Engineering

A Magnetic Resonance Compatible Knee Extension Ergometer , Youssef Jaber, Mechanical Engineering

Non-Equispaced Fast Fourier Transforms in Turbulence Simulation , Aditya M. Kulkarni, Mechanical Engineering

INCORPORATING SEASONAL WIND RESOURCE AND ELECTRICITY PRICE DATA INTO WIND FARM MICROSITING , Timothy A. Pfeiffer, Mechanical Engineering

Effects of Malformed or Absent Valves to Lymphatic Fluid Transport and Lymphedema in Vivo in Mice , Akshay S. Pujari, Mechanical Engineering

Electroless Deposition & Electroplating of Nickel on Chromium-Nickel Carbide Powder , Jeffrey Rigali, Mechanical Engineering

Numerical Simulation of Multi-Phase Core-Shell Molten Metal Drop Oscillations , Kaushal Sumaria, Mechanical Engineering

Theses from 2016 2016

Cold Gas Dynamic Spray – Characterization of Polymeric Deposition , Trenton Bush, Mechanical Engineering

Intent Recognition Of Rotation Versus Translation Movements In Human-Robot Collaborative Manipulation Tasks , Vinh Q. Nguyen, Mechanical Engineering

A Soft Multiple-Degree of Freedom Load Cell Based on The Hall Effect , Qiandong Nie, Mechanical Engineering

A Haptic Surface Robot Interface for Large-Format Touchscreen Displays , Mark Price, Mechanical Engineering

Numerical Simulation of High Velocity Impact of a Single Polymer Particle during Cold Spray Deposition , Sagar P. Shah, Mechanical Engineering

Tunable Plasmonic Thermal Emitter Using Metal-Coated Elastomeric Structures , Robert Zando, Mechanical Engineering

Theses from 2015 2015

Thermodynamic Analysis of the Application of Thermal Energy Storage to a Combined Heat and Power Plant , Benjamin McDaniel, Mechanical Engineering

Towards a Semantic Knowledge Management Framework for Laminated Composites , Vivek Premkumar, Mechanical Engineering

A CONTINOUS ROTARY ACTUATION MECHANISM FOR A POWERED HIP EXOSKELETON , Matthew C. Ryder, Mechanical Engineering

Optimal Topological Arrangement of Queues in Closed Finite Queueing Networks , Lening Wang, Mechanical Engineering

Creating a New Model to Predict Cooling Tower Performance and Determining Energy Saving Opportunities through Economizer Operation , Pranav Yedatore Venkatesh, Mechanical Engineering

Theses from 2014 2014

New Generator Control Algorithms for Smart-Bladed Wind Turbines to Improve Power Capture in Below Rated Conditions , Bryce B. Aquino, Mechanical Engineering

UBOT-7: THE DESIGN OF A COMPLIANT DEXTEROUS MOBILE MANIPULATOR , Jonathan Cummings, Mechanical Engineering

Design and Control of a Two-Wheeled Robotic Walker , Airton R. da Silva Jr., Mechanical Engineering

Free Wake Potential Flow Vortex Wind Turbine Modeling: Advances in Parallel Processing and Integration of Ground Effects , Nathaniel B. Develder, Mechanical Engineering

Buckling of Particle-Laden Interfaces , Theo Dias Kassuga, Mechanical Engineering

Modeling Dynamic Stall for a Free Vortex Wake Model of a Floating Offshore Wind Turbine , Evan M. Gaertner, Mechanical Engineering

An Experimental Study of the C-Start of a Mechanical Fish , Benjamin Kandaswamy Chinna Thambi, Mechanical Engineering

Measurement and Verification - Retro-Commissioning of a LEED Gold Rated Building Through Means of an Energy Model: Are Aggressive Energy Simulation Models Reliable? , Justin M. Marmaras, Mechanical Engineering

Development of a Support Structure for Multi-Rotor Wind Turbines , Gaurav Murlidhar Mate, Mechanical Engineering

Towards Accessible, Usable Knowledge Frameworks in Engineering , Jeffrey Mcpherson, Mechanical Engineering

A Consistent Algorithm for Implementing the Space Conservation Law , Venkata Pavan Pillalamarri Narasimha Rao, Mechanical Engineering

Kinetics of Aluminization and Homogenization in Wrought H-X750 Nickel-Base Superalloy , Sean Reilly, Mechanical Engineering

Single-Phase Turbulent Enthalpy Transport , Bradley J. Shields, Mechanical Engineering

CFD Simulation of the Flow around NREL Phase VI Wind Turbine , Yang Song, Mechanical Engineering

Selection of Outputs for Distributed Parameter Systems by Identifiability Analysis in the Time-scale Domain , Teergele, Mechanical Engineering

The Optimization of Offshore Wind Turbine Towers Using Passive Tuned Mass Dampers , Onur Can Yilmaz, Mechanical Engineering

Design of a Passive Exoskeleton Spine , Haohan Zhang, Mechanical Engineering

TURBULENT TRANSITION IN ELECTROMAGNETICALLY LEVITATED LIQUID METAL DROPLETS , Jie Zhao, Mechanical Engineering

Theses from 2013 2013

Optimization of Mixing in a Simulated Biomass Bed Reactor with a Center Feeding Tube , Michael T. Blatnik, Mechanical Engineering

Continued Development of a Chilled Water System Analysis Tool for Energy Conservation Measures Evaluation , Ghanshyam Gaudani, Mechanical Engineering

Application of Finite Element Method in Protein Normal Mode Analysis , Chiung-fang Hsu, Mechanical Engineering

Asymmetric Blade Spar for Passive Aerodynamic Load Control , Charles Mcclelland, Mechanical Engineering

Background and Available Potential Energy in Numerical Simulations of a Boussinesq Fluid , Shreyas S. Panse, Mechanical Engineering

Techno-Economic Analysis of Hydrogen Fuel Cell Systems Used as an Electricity Storage Technology in a Wind Farm with Large Amounts of Intermittent Energy , Yash Sanghai, Mechanical Engineering

Multi Rotor Wind Turbine Design And Cost Scaling , Preeti Verma, Mechanical Engineering

Activity Intent Recognition of the Torso Based on Surface Electromyography and Inertial Measurement Units , Zhe Zhang, Mechanical Engineering

Theses from 2012 2012

Simulations of Non-Contact Creep in Regimes of Mixed Dominance , Maija Benitz, Mechanical Engineering

Techniques for Industrial Implementation of Emerging Semantic Technologies , Jay T. Breindel, Mechanical Engineering

Environmental Impacts Due to Fixed and Floating Offshore Wind Turbines , Micah K. Brewer, Mechanical Engineering

Physical Model of the Feeding Strike of the Mantis Shrimp , Suzanne M. Cox, Mechanical Engineering

Investigating the Relationship Between Material Property Axes and Strain Orientations in Cebus Apella Crania , Christine M. Dzialo, Mechanical Engineering

A Multi-Level Hierarchical Finite Element Model for Capillary Failure in Soft Tissue , Lu Huang, Mechanical Engineering

Finite Element Analysis of a Femur to Deconstruct the Design Paradox of Bone Curvature , Sameer Jade, Mechanical Engineering

Vortex-Induced Vibrations of an Inclined Cylinder in Flow , Anil B. Jain, Mechanical Engineering

Experimental Study of Stability Limits for Slender Wind Turbine Blades , Shruti Ladge, Mechanical Engineering

Semi-Active Damping for an Intelligent Adaptive Ankle Prosthesis , Andrew K. Lapre, Mechanical Engineering

A Finite Volume Approach For Cure Kinetics Simulation , Wei Ma, Mechanical Engineering

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines

Author Corner

• Login for Faculty Authors
• Faculty Author Gallery
• Expert Gallery
• University Libraries
• Mechanical and Industrial Engineering Webpage
• UMass Amherst

This page is sponsored by the University Libraries.

© 2009 University of Massachusetts Amherst • Site Policies

Privacy Copyright

Home > Engineering > Civil and Construction Engineering > Master's Theses

Civil and Construction Engineering Master's Theses

All master’s theses completed through the Graduate College of Western Michigan University since 2012 have been entered into ScholarWorks. Some may be embargoed or restricted by the authors and may be only available from on-campus computers. Print copies from earlier years are available through interlibrary loan. We have a few digital copies of earlier years. If you have any questions, please contact [email protected].

Theses/Dissertations from 2023 2023

Investigating Disparities and Safety Equity in Pedestrian Nighttime Crashes in Michigan , Sia Isaria Mwende

Theses/Dissertations from 2020 2020

Evaluating the Impacts of Building Information Modeling on Construction Change Orders in Iraq , Nehad Alshebbany

Numerical Performance Evaluation of the Wooden Frame Structures with Adhesive Applied Connection under Wind and Seismic Loading , Sharthak Bhandary

Theses/Dissertations from 2018 2018

Establishing Delay-Based Criteria for Installing Traffic Signals at Two-Lane Roundabouts , Oluwaseun Ayomide Adegbaju

From Architectural Design to Structural Analysis: A Data-Driven Approach to Study Building Information Modeling (BIM) Interoperability , Mohammed Aldegeily

Evaluation of Bike Boxes and Protected Intersections with Bicycle Signal Treatments for Improving Safety and Multimodal Mobility at Urban Signalized Intersections , Odai Al Houz

Enabling Robust Distributed Real-Time Hybrid Simulation Method and Expanding Its Applications in Floating Wind Turbine Systems , Mehmet Cinar

Maintaining Deck Profile in Steel I-Girder Bridges During Deck Placement , Ali Naif Inceefe

Theses/Dissertations from 2017 2017

Enhancing Intersection Safety for the Blind and Visually Impaired (BVI) Pedestrian Using Device-to-Infrastructure Communication , Mohammad Sayyah Al-Akash

Visualizing the Constructability of a Steel Structure Using Building Information Modeling and Game Simulation , Mohammed Al Dafaay

Evaluation of Swarm Nodes for Proximity Sensing on Construction Sites , Mohamed Ahmed Madi Binalhaj

Implementing Online Updating to Complex Hysteresis Models in Real- Time Hybrid Simulation Using Constrained Unscented Kalman Filter , Bilal Ahmed Mohammed

Economic Impact Analysis of Bridge Construction , Funda Yavuz

Theses/Dissertations from 2016 2016

Analysis of Pedestrian and Bicycle Crashes in Michigan , Ahmed Abbas Ghubin Al-zubaidi

Comparison of Safety and Operational Performances for Three Engineering Countermeasures , Ali Hamzah Hussein Alzuhairi

Comprehensive Evaluation of the Effectiveness of Pedestrian Countdown Signals on Road Users in Michigan , Richard Atta Boateng

Safety Benefit Analysis of Alternative Delineation Practices in Michigan , Brenda C. Burdick

Verifying Automated Prestressed Concrete Design Software for MDOT Bridge Design Standards , Hussein Kadhim Abood Khalaf

Improved Methodology for Developing Non-Motorized Safety Perfomance Functions , Keneth Morgan Kwayu

Application of Wavelet Transform in Structural Health Monitoring , Yashodhya Swarna Sri Dhanapala Liyana Kankanamge

Analysis of Transit Accessibility for People with Disabilities , Rostam Khalid Mohammed Ameen Qatra

Developing Standard Procedures for Structural Aspects of Slide-in Bridges in Accelerated Bridge Construction (ABC) , Ozan Utku Ridvanoglu

An Equivalent Plate Model with Orthotropic Material Properties for Adjacent Box-Beam Bridge Superstructure , Timothy Alexander Schnell

Transportation System and Its Association with Human Health – A Review and Modeling Approach , Fnu Zahed

Theses/Dissertations from 2015 2015

Evaluation of the Safety Effectiveness of Clearview Font and Fluorescent Yellow Sheeting on Michigan Freeways and Non-Freeways , Lusanni Mercedes Acosta Rodrieuez

Analysis of Mobility Impact for Implementing Complete Streets , Marino Esteban Calderón Díaz

A Microscopic Simulation Approach to Performance Evaluation of Intelligent Transportation System Corridors: A Case in Michigan , Matthew Levi Clark

Fragility Assessment of High-Rise Reinforced Concrete Buildings , Hezha Sadraddin

Theses/Dissertations from 2014 2014

An Integral Framework for Sustainable Building Design , Bushra Asfari

Economic Analysis of Michigan Commercial Vehicle Enforcement Strategies , Randy José Jorge Díaz

Development of Safety Performance Functions for Non-Motorized Traffic Safety , Hamidreza Ahady Dolatsara

Real-Time Hybrid Simulation with Online Model Updating , Adam Mueller

Overtime Traffic Enforcement Evaluation: A Methodology for Selecting Agencies and Enforcement Periods , Dario Enrique Romero Santana

Virtual Analysis and Evaluation of Roundabout Safety and Operational Features , Elisha Jackson Wankogere

Theses/Dissertations from 2013 2013

Spatial Factors Impacting Non-Motorized Exposures and Crash Risks , Farhad Abasahl

Standardized Longitudinal Connection Detail for Decked Precast Prestressed Concrete Girders , Ramzi Muftah Ali Abduallah

Investigating Crash Frequency and Injury Severity at Freeway Fixed Weigh Stations in Michigan , Fathi Salam Mo. Alkhatni

Safety Benefits of Adaptive Traffic Control Systems: A Case Study of Oakland County, MI , Joshua Adam Fink

Evaluation of Point Cloud Data Dispersion with Relation to Point Cloud Density under Field Conditions , Ling Kit Kong

An Automated Approach to Dynamic Site Layout Planning , Duy Huu Nguyen

Cyber-Adaptive Physical Systems for Automated Construction Progress Monitoring and Asset Tracking , Syed Hammad Rasheed

Theses/Dissertations from 2012 2012

The Implementation of a Versatile Pseudodynamic Hybrid Simulation for Seismic Evaluation of Structural Systems , Chelsea Griffith

Regression-Based Prioritization and Data Modeling for Customized Civil Engineering Data Collection , Omar Kanaan

Statistical and Numerical Integrated Approach for Detecting Onset of Prefabricated Bridge Component Connection Deterioration , Cem Mansiz

Structural Health Monitoring of a Bridge Structure Using Wireless Sensor Network , CheeKian Teng

Theses/Dissertations from 2011 2011

Sensor Modeling and Cost Benefit of Using Laser Scanning Technology in AEC , Fahd Saleh Alaswad

Statistical and Visualization Approach for Ranking Factors Affecting NBI Bridge Rating , Saad Aoun Alqahtani

Solar Modeling and Cost-Benefit Analysis of Energy Efficiency Window Arrangements , Wael Muqhim Alruqi

A Comparative Analysis of the Sense of Construction Delays of Experienced and Inexperienced Engineers , Salahedeen A. El Kadeki

Development of a Versatile Hybrid Testing System for Seismic Evaluation of Structural Systems , Griffin Enyart

Selecting an Optimal Construction Alternative through Informed Decision-Making Highway Bridges , Abdul Wahed Mohammed

Theses/Dissertations from 2010 2010

A Computer Model for Sustainable for Life-Cycle Cost Analysis , Sami Ghurmullah Al Ghamdi

Sustainable Universal Design and Zero Energy for Buildings , Ahmad Mohammad Alotaibi

Integration of Sustainability Measure into Highways , Krishna Prasad Dhakal

Investigation of Damage Detection Methods with a Wireless Sensor Network , Mark Joseph Humiecki

Application of Building Information Modeling (BIM) toward Zero Energy High Rise Office Buildings , Moutaz Mohammed Msawealfi

Design Recommendations for High Skew Link Slabs , Michael A. Romkema

Theses/Dissertations from 2009 2009

Optimization Computer Model for Heavy Equipment Selection , Naif Albelwi

Optimal Placement of Traffic Sensors for Traffic Operation and Management , Nahedh M. Alhubail

An Integrated Database Management System and Building Information Modeling for Sustainable Design , Sultan Althobaiti

The Design and Implementation of a Sensor Network System for Concrete Bridge Health Monitoring , Joseph John Barbera

Barrier-Based Evacuation Plan for University Campuses , Asadur Rahman

Highway Construction Staging and Intelligent Traffic Routing: A Cost Optimization Strategy , Richard C. Rhodes

Theses/Dissertations from 2008 2008

Incorporation of Space Syntax Theory in Determining Safe and Efficient Construction Site Layout , Minsuck Cho

Cathodic Protection of Reinforced Concrete Bridge Decks , Joshua Thomas Host

Theses/Dissertations from 2007 2007

Data Fusion Technique for Measuring Intersection Delay Using GPS-Enabled Probe Vehicles , Byung-Hee Han

Development of Knowledge Base of Concrete Bridge Maintenance System , Bahre Karam

Health Monitoring of Concrete Bridges Utilizing Sensor Technology , Ammar Zalt

Theses/Dissertations from 2006 2006

Repair, Inspection and Maintenance Methods of Steel Bridges , Deepak Koirala

Computer Model to Select Leed Certification for Building Projects , Ruba Mirghani Mohammed

Simulation Based Evaluation of Parking Facilities , Niru Tiwari

Theses/Dissertations from 2005 2005

Alkali Silica Reaction in Virgin and Recycles Aggregates: State of the Art and Experimental Investigation using ASTM C 1260 and the Staining Method , Shadi Sami Bajjali

Evaluation of Mechanical Properties of Self-Consolidating Concrete , Bhusan Basnet

Decision Support System for Bridge Maintenance , Imran Fazal

Evaluation of Mechanical Properties of Recycled Aggregate Concrete , Sajjad Ali Khan

The Detection of Common Concrete Bridge Deck Defects Using the Thermography, Impact Echo, and Ground Penetrating Radar , Saleh Z. Nabulsi

Theses/Dissertations from 2004 2004

Oxidation of Titanium in Alpha-Calf Serum Solution , Ali Stait Ismailoglu

Theses/Dissertations from 2003 2003

Mechanical Properties and Corrosion Resistance of NI-SIC NANO Composite Coatings on 2024-T3 Aluminum , Amit Jain

Development of a Redesign Plan for Moore Hall using Architectural Principles of Green Building and Sustainable Design , Alkhaziam Saad

Future Housing in the United States: Senior’s Housing Demand , Sandeep Singh

Innovative Contracting Prequalification/Selecion Model using Analytical Hierarchy Process (AHP) , Saad J. Zidan

Theses/Dissertations from 2002 2002

An Imaging System for Concrete Bridge Inspection , Mohammed Talal Al-Bataineh

A Model for Optimizing the Selection of Project Delivery Systems Using Analytic Hierarchy Process (AHP) , Arosha De Silva

Metastable Phases of Mgo-TiO 2 Solid Solutions , Liang-Chieh Ma

Building Deconstruction Guidelines: Tools for Recovering Building Materials , Ali Ayedh Merzen

Management Commitment to Construction Safety , Areen M. Shaar

Adaptation of Project Finance to Small Contractor Financing , Ragunathan Venkateswaran

Theses/Dissertations from 2001 2001

Structural Studies of Metastable Nanocrystalline Magnesium Titanate Ceramics , Renmei Xu

Theses/Dissertations from 2000 2000

Texture and Young’s Modulus of Nickel/Gamma-Alumina Composites , Abdulaziz Alamr

CFMMS – Computerized Facilities Maintenance Management System , Prawit Rotsawatsuk

Learning Reinforced Concreyte Design Principles Using a Java-VRML based Design Studio , Amarneethi Vamadevan

Theses/Dissertations from 1999 1999

Quantitative, Non-Destructive Calibration of Scanned Probe Microscope Cantilevers , John Hazel

Development of Mechanical Properties Micromapping for Composite Polymer Systems , Zheng Huang

Intellicrances – A Neural Network-Based Crane Selection System , André T. Mund

Conform- A Computerized Job-Built Concrete Construction Formwork Design , Kajpong Pongponrat

ScholarWorks

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines

Author Corner

• Civil and Construction Engineering

Western Michigan University Libraries, Kalamazoo MI 49008-5353 USA | (269) 387-5611

Home | About | FAQ | My Account | Accessibility Statement

Privacy | Copyright

Visit the Health Advisories website for the latest vaccination and mask information and to Report a Case.

Questions about FAFSA and CADAA?

Visit our Financial Aid and Scholarship Office for updated information, workshops and FAQs.

Aerospace Engineering

Sample project/thesis proposal.

AE295A - Master’s Project Proposal Presented to Dr. Nikos Mourtos by Joshua Benton

September 1, 2011

Miniaturization, Integration, Analysis, and High-Altitude Flight Testing of a Scalable Autonomous GPS-Guided Parafoil for Targeted Payload Return

Background and context.

A parafoil is a special type of airfoil that is non-rigid and relies on dynamic pressure in flight to retain its shape. Due to their being non-rigid (and therefore foldable/packable), parafoils lend themselves very well to applications where controlled descent is required, but limited stowage is available for any sort of traditional wing structure. Also, compared to a traditional round parachute, parafoils have much greater directional control, improved glide performance, and the ability to adjust rate of descent by deforming the shape of the airfoil via control (or “toggle”) lines. These attributes of parafoils have made them very popular for human aerial descent, where the entire parafoil as well as a redundant backup can be stowed in a backpack and deployed rapidly when necessary.

In addition to manned applications, parafoils provide an attractive means to deliver a variety of payloads (e.g. military supplies, emergency equipment, food packages) to remote or inaccessible locations with a moderate degree of accuracy. This accuracy can be further improved by including an autonomous control system on the payload, which can effectively steer the parafoil in the same fashion as a human would, guiding it with a higher degree of precision to its landing point. In the last decade, several independent research efforts have focused on doing exactly this, providing complete, “intelligent” parafoil systems which autonomously steer themselves to a pre-defined landing point to deliver payloads (typically military supplies). Recent research efforts have improved accuracy of these systems from a few kilometers landing error to orders of magnitude less, depending on prevailing winds and initial drop altitude.

In my work at NASA Ames Research Center, we have identified a need to return small payloads (such as biological samples and small science experiments) from the International Space Station when desired or necessary, independently of the larger manned or supply vehicles which visit the Station with relative infrequency. Our proposed solution to this problem requires a means to guide the payload on the final leg of its journey to a selected landing point, with a high degree of precision, to aid in simple and immediate retrieval. The volumetric space available in the proposed return system eliminates rigid wing structures as a solution, and the gliding device for atmospheric descent must remain stowed until post-reentry. For these reasons, a parafoil system appears to be a very attractive solution.

In addition to ISS return applications, a well-developed autonomous parafoil system could be scaled larger and used for a number of other applications of interest to us, including the return of experiments from sub-orbital sounding rocket flights, which currently relies on slow, expensive, and frequently- unsuccessful water recovery from rented boats.

We have identified and worked with researchers at the Naval Postgraduate School in Monterrey, California, on a GPS-guided parafoil device they are developing. From our collaboration, we have built our own version of their GPS-guided return device, and have drop-tested it several times from low altitudes (~3000 ft. AGL) from an autonomous UAV. We have also collaborated with colleagues and a student team at the University of Idaho in 3 high-altitude balloon drops of the device, but two of these drops resulted in failures: the first, failure to separate from the balloon due to tangling; and the second, failure for the parafoil to fully inflate.

Problem Definition and Approach

Though we have already fabricated a prototype version of the autonomous parafoil return device we wish to use for the ISS, there are still many problems to solve to make it a practical and feasible solution:

• Miniaturization of the autonomous control system : At present, the autonomous steering system that hangs below the parafoil is much too large volumetrically to fit within the confines of the ISS sample return system. A design of the physical structure and a more efficient packaging scheme are required to miniaturize the control system while still maintaining reliability and functionality. Smaller steering servos, more efficient line rigging and tensioning, and a smaller battery (while still maintaining design margin) are necessary to achieve this.
• Characterization of high-altitude parafoil aerodynamics : Due to the nature of the application we wish to use this device for, it is advantageous to attain steering authority at as high an altitude as possible. In doing so, the maximum achievable ground range of targeted landing is improved. Unfortunately, the functioning of a parafoil relies on dynamic pressure to maintain its structural shape, and high-altitude use is problematic due to collapse and “nose-diving” of the parafoil over its payload. To understand the maximum glide capability we can achieve with a parafoil return device, the aerodynamics of the parafoil at high altitude/low pressure need to be characterized and validated, through analysis and testing. CFD, vacuum chamber testing, and another high-altitude balloon test in April 2012 will be used to analyze and validate the performance of the parafoil at high altitude.
• Semi-rigidization of the parafoil structure : To eliminate the problem of parafoil collapse in low dynamic pressure, a method of self-deployment while maintaining packable stowage capability will be developed. A system of lightweight spring-like material will be added to the parafoil to make the structure “semi-rigid” and capable of maintaining its shape in a low pressure environment. Vacuum chamber testing will provide a means of validation prior to balloon flight testing of the integrated system.
• Software porting of advanced guidance code to a newer control board : At present, our version of the Naval Postgraduate School’s GPS-guided parafoil device uses a different microprocessor board than their device. Previously, I have only programmed our board to steer the device to a specified heading, rather than to a specific set of landing coordinates. A ported version of the advanced code exists, but is written for an older version of our control board, and has yet to be tested/de-bugged. As part of the development effort, the ported code requires modification for compatibility with the new version of the control board, debugging, and ground-testing.

As noted above, an opportunity exists to flight-test the entire system from a high-altitude balloon in April 2012 with the collaboration of the University of Idaho’s RISE balloon team. This is the same team we have worked with in the past and have developed an excellent working relationship and understanding of all necessary procedures and protocols for safe flight testing of the parafoil system. During flight, the payload and balloon are tracked via redundant GPS transponders on the APRS radio network (amateur HAM band), enabling precise recovery of the payload systems.

Data returned from the flight testing includes HD video (one camera up-looking to the parafoil and another looking 45 degrees to the ground); a GPS flight track including time and altitude via the APRS network as well as the data-logging control board of the parafoil device; and three-dimensional component velocity and acceleration of the parafoil payload via an on-board IMU.

ODU Digital Commons

Home > Engineering & Technology > MAE > ETDs

Mechanical & Aerospace Engineering Theses & Dissertations

Theses and dissertations published by graduate students in the Department of Mechanical and Aerospace Engineering, College of Engineering, Old Dominion University since Fall 2016 are available in this collection. Backfiles of all dissertations (and some theses) have also been added.

In late Fall 2023 or Spring 2024, all theses will be digitized and available here. In the meantime, consult the Library Catalog to find older items in print.

Theses/Dissertations from 2023 2023

Thesis: Switching Methods for Three-Dimensional Rotational Dynamics Using Modified Rodrigues Parameters , Matthew Jarrett Banks

Dissertation: Studies of Flowfields and Dynamic Stability Characteristics of a Quadrotor , Engin Baris

Thesis: Development, Experimental Validation, and Progressive Failure Modeling of an Ultra-Thin High Stiffness Deployable Composite Boom for in-Space Applications , Jimesh D. Bhagatji

Thesis: Design and Implementation of a Launching Method for Free to Oscillate Dynamic Stability Testing , Kristen M. Carey

Thesis: SeaLion CubeSat Mission Architecture Using Model Based Systems Engineering with a Docs as Code Approach , Kevin Yi-Tzu Chiu

Dissertation: RoboRetrieve --In a Dual Role as a Hand-held Surgical Robot and a Collaborative Robot End-effector to Perform Spillage-free Specimen Retrieval in Laparoscopy , Siqin Dong

Thesis: Fabrication of Solid Oxide Fuel Cell Components Using Stereolithography 3D Printing , Hannah Dyer

Thesis: Fusion Bonding Behavior of 3D Printed PA6/CF Composites Via Post Fabrication Compaction , Gonzalo Fernandez Mediavilla

Dissertation: Machine Learning Approach to Activity Categorization in Young Adults Using Biomechanical Metrics , Nathan Q. C. Holland

Thesis: Study of Microphonic Effects on the C100 Cryomodule for High Energy Electron Beam Accelerators , Caleb James Hull

Dissertation: E-Cadherin Force Transmission and Stiffness Sensing , Mazen Mezher

Thesis: Experimental and Computational Aerodynamic Studies of Axially-Oriented Low-Fineness-Ratio Cylinders , Forrest Miller

Thesis: The Effect of Through Thickness Reinforcement Angle on the Disbonding Behavior in Skin-Stringer Configuration , Christopher John Morris

Dissertation: Chemical and Physical Interaction Mechanisms and Multifunctional Properties of Plant Based Graphene in Carbon Fiber Epoxy Composites , Daniel W. Mulqueen

Thesis: Data-Driven Predictive Modeling to Enhance Search Efficiency of Glowworm-Inspired Robotic Swarms in Multiple Emission Source Localization Tasks , Payal Nandi

Dissertation: Fabrication of Smooth SAC305 Thin Films via Magnetron Sputtering and Evaluations of Microstructure, Creep, and Electrical Resistivity , Manish Ojha

Dissertation: Faster, Cheaper, and Better CFD: A Case for Machine Learning to Augment Reynolds-Averaged Navier-Stokes , John Peter Romano II

Thesis: A Comparative Study of Vinti-Based Orbit Propagation and Estimation for CubeSats in Very Low Earth Orbits , Ethan Michael Senecal

Theses/Dissertations from 2022 2022

Thesis: A Comparison of Uniaxial Compressive Response and Inelastic Deformation Mechanisms in Freeze Cast Alumina-Epoxy Composites Without and With Rigid Confinement , Tareq Aljuhari

Thesis: Failure Mode, Effects and Criticality Analysis of a Very Low Earth Orbit CubeSat Mission , Robb Christopher Borowicz

Thesis: A Study of Asymmetric Supersonic Wind Tunnel Nozzle Design , Brittany A. Davis

Thesis: Electromagnetic Modeling of a Wind Tunnel Magnetic Suspension and Balance System , Desiree Driver

Dissertation: Advanced Generalized Predictive Control and Its Application to Tiltrotor Aircraft for Stability Augmentation and Vibration Reduction , Thomas Glen Ivanco

Dissertation: Numerical Simulation of Electroosmotic Flow of Viscoelastic Fluid in Microchannel , Jianyu Ji

Thesis: Assembly of Ceramic Particles in Aqueous Suspensions Induced by High-Frequency AC Electric Field , James E. John IV

Dissertation: The Effect of Soft Tissue and Bone Morphology on the Stresses in the Foot and Ankle , Jinhyuk Kim

Thesis: Development of Modeling and Simulation Platform for Path-Planning and Control of Autonomous Underwater Vehicles in Three-Dimensional Spaces , Sai Krishna Abhiram Kondapalli

Thesis: Deep Learning Object-Based Detection of Manufacturing Defects in X-ray Inspection Imaging , Juan C. Parducci

Dissertation: Utilization of Finite Element Analysis Techniques for Adolescent Idiopathic Scoliosis Surgical Planning , Michael A. Polanco

Thesis: Mechanics of Preimpregnated Fiber Tow Deposition and Compaction , Virginia Meredith Rauch

Dissertation: Role of Structural Hierarchy in Multiscale Material Systems , Siavash Sattar

Thesis: Implementation of an Extended Kalman Filter Using Inertial Sensor Data for UAVs During GPS Denied Applications , Sky Seliquini

Dissertation: Collaborative Robotics Strategies for Handling Non-Repetitive Micro-Drilling Tasks Characterized by Low Structural Mechanical Impedance , Xiangyu Wang

Theses/Dissertations from 2021 2021

Dissertation: Tunable Compressive Mechanical Behavior of Ice-Templated Materials , Sashanka Akurati

Thesis: Analysis of a Non-Equilibrium Vortex Pair as Aircraft Trailing Vortices , Manuel Ayala

Thesis: Modeling Interactions in Concentrated Ceramic Suspensions Under AC Electric Field , Naga Bharath Gundrati

Dissertation: Improved Strain Gage Instrumentation Strategies for Rotorcraft Blade Measurements , Timothy S. Davis

Thesis: A Model-Based Systems Engineering Approach to e-VTOL Aircraft and Airspace Infrastructure Design for Urban Air Mobility , Heidi Selina Glaudel

Dissertation: Development and Applications of Adjoint-Based Aerodynamic and Aeroacoustic Multidisciplinary Optimization for Rotorcraft , Ramiz Omur Icke

Thesis: A New Method for Estimating the Physical Characteristics of Martian Dust Devils , Shelly Cahoon Mann

Thesis: Post-Processing and Characterization of Additive Manufactured Carbon Fiber Reinforced Semi-Crystalline Polymers , Patricia Revolinsky

Thesis: Gradient-Based Tradeoff Design for Engineering Applications , Lena Alexis Royster

Thesis: The Effect of Through Thickness Reinforcement on Debonding Behavior of Skin/Stringer Configuration , Yogaraja Sridhar

Thesis: Empirical Modeling of Tilt-Rotor Aerodynamic Performance , Michael C. Stratton

Thesis: A Digital One Degree of Freedom Model of an Electromagnetic Position Sensor , Michelle Elizabeth Weinmann

Theses/Dissertations from 2020 2020

Thesis: Parametric Study of Residual Stresses in Wire and Arc Additive Manufactured Parts , Hisham Khaled Jamil Abusalma

Thesis: The Effect of Compaction Temperature and Pressure on Mechanical Properties of 3D Printed Short Glass Fiber Composites , Pushpashree Jain Ajith Kumar Jain

Thesis: Numerical Analysis of a Roadway Piezoelectric Harvesting System , Abdul Rahman Badawi

Dissertation: Role of Anisometric Particles in Ice-Templated Porous Ceramic Structure and Mechanical Properties , Mahesh Banda

Thesis: Mechanism of Compaction With Wrinkle Formation During Automatic Stitching of Dry Fabrics and the Size Effect of Compression Molded Discontinuous Fiber-Reinforced Composites , Anibal Benjamin Beltran Laredo

Thesis: Conical Orbital Mechanics: A Rework of Classic Orbit Transfer Mechanics , Cian Anthony Branco

Thesis: Rotorcraft Blade Angle Calibration Methods , Brian David Calvert Jr.

Dissertation: Onboard Autonomous Controllability Assessment for Fixed Wing sUAVs , Brian Edward Duvall

Thesis: A Parametric Analysis of a Turbofan Engine with an Auxiliary Bypass Combustion Chamber – The TurboAux Engine , Kaleab Fetahi

Thesis: Space-Based Countermeasure for Hypersonic Glide Vehicle , Robert Joseph Fowler IV

Thesis: Compaction and Residual Stress Modeling in Composite Manufactured with Automated Fiber Placement , Von Clyde Jamora

Thesis: Trajectory Simulation With Battery Modeling for Electric Powered Unmanned Aerial Vehicles , Ege Konuk

Thesis: Detailed Modeling of the Flash Hydrolysis of Algae for Biofuel-Production in COMSOL Multiphysics , Noah Joseph LeGrand

Thesis: Through-Thickness Reinforcement and Repair of Carbon Fiber Based Honeycomb Structures Under Flexure and Tension of Adhesively Bonded Joints , Aleric Alden Sanders

Thesis: Energy Harvesting Using Flextensional Piezoelectric Energy Harvesters in Resonance and Off-Resonance Modes , Mohamed A. Shabara

Thesis: Thermal Contact Resistance Measurement and Related Uncertainties , Amanda Elizabeth Stark

Thesis: Model Based Systems Engineering for a Venture Class Launch Facility , Walter McGee Taraila

Thesis: A Post-Impact Behavior of Platelet-Based Composites Produced by Compression Molding , Christopher Eugene Ervin Volle

Thesis: Nonlinearity Index Aircraft Spin Motion Analysis With Dynamic Inversion Spin Recovery Controller Design , Jeffry Walker

Thesis: A Study of the Aeroacoustics of Swept Propellers for Small Unmanned Aerial Vehicles , Arthur David Wiedemann

Thesis: Finite Element Analysis Investigation of Hybrid Thin-Ply Composites for Improved Performance of Aerospace Structures , Alana M. Zahn

Theses/Dissertations from 2019 2019

Thesis: Characterization and Optimization of a Propeller Test Stand , Colin Bruce Leighton Benjamin

Dissertation: Endogenous Force Transmission Between Epithelial Cells and a Role for α-Catenin , Sandeep Dumbali

Dissertation: Effect of the Physical Micro-Environment on Cell Adhesion and Force Exertion , Mohamad Eftekharjoo

Thesis: Reducing the Noise Impact of Unmanned Aerial Vehicles by Flight Control System Augmentation , Matthew B. Galles

Thesis: Design and Manufacture of an Inertial Cascade Impactor for Industrial Hygiene Purposes , Hector Joel Gortaire

Thesis: Off Axis Compressive Response of Ice-Templated Ceramics , Rahul Kumar Jujjavarapu

Thesis: Unsupervised-Learning Assisted Artificial Neural Network for Optimization , Varun Kote

Dissertation: Numerical Simulation of Viscoelastic Flow in Micro/Nanochannels , Lanju Mei

Thesis: Comparison of Support Methods for Static Aerodynamic Testing and Validation of a Magnetic Suspension and Balance System , Cameron K. Neill

Thesis: Extension of a Penalty Method for Numerically Solving Constrained Multibody Dynamic Problems , Troy Newhart

Dissertation: Computational Analysis and Design Optimization of Convective PCR Devices , Jung Il Shu

Thesis: Periodic Orbit Analytic Construction In The Circular Restricted Three-Body Problem , Jay Shriram Suryawanshi

Thesis: A CFD Study of Steady Fully Developed Laminar Flow Through a 90-Degree Bend Pipe with a Square Cross-Sectional Area , Subodh Sushant Toraskar

Dissertation: Estimation of Arterial Wall Parameters Via Model-Based Analysis of Noninvasively Measured Arterial Pulse Signals , Dan Wang

Theses/Dissertations from 2018 2018

Thesis: Offshore Wind Energy: Simulating Local Offshore Wind Turbine , Ian P. Aquino

Dissertation: Epithelial Sheet Response to External Stimuli , Yashar Bashirzadeh

Thesis: Anthropomorphically Inspired Design of a Tendon-Driven Robotic Prosthesis for Hand Impairments , Manali Bapurao Bhadugale

Thesis: Aerothermodynamic Analysis of a Mars Sample Return Earth-Entry Vehicle , Daniel A. Boyd

Thesis: Volterra Series Approximation for Multi-Degree of Freedom, Multi-Input, Multi-Output, Aircraft Dynamics , Alexander J. Chen

Dissertation: Simplified, Alternative Formulation of Numerical Simulation of Proton Exchange Membrane Fuel Cell , Russell L. Edwards

Thesis: Distributed Sensing and System Identification of Cantilever Beams and Plates in the Presence of Weak Nonlinearities , Patrick Sean Heaney

Thesis: Dynamic Response Modeling of High Speed Planing Craft with Enforced Acceleration , Brian K. Johnson

Dissertation: Identification and Optimal Linear Tracking Control of ODU Autonomous Surface Vehicle , Nadeem Khan

Dissertation: Design and Implementation of an Artificial Neural Network Controller for Quadrotor Flight in Confined Environment , Ahmed Mekky

Thesis: Gust Alleviation System for General Aviation Aircraft , Lucas Coleman Mills

Thesis: Human-Robot Collaborative Force-Controlled Micro-Drilling for Advanced Manufacturing and Medical Applications , Parimal Mahesh Prajapati

Thesis: Single-Stage, Venturi-Driven Desalination System , Brandon Proetto

Thesis: A Cost Effective Design for a Propeller Thrust/Torque Balance , Nicholas Barrett Sadowski

Dissertation: Understanding the Mechanical Behavior of Costal Cartilage at Their Curved Exterior Surface Via a Tactile Sensor with a Built-In Probe for Distributed-Deflection Detection , Jiayue Shen

Thesis: A Scientific Approach to Understanding the Head Trauma Endured by a Mixed Martial Arts Fighter , John William Michael Sorbello

Thesis: Robocatch: Design and Making of a Hand-Held Spillage-Free Specimen Retrieval Robot for Laparoscopic Surgery , Farid Tavakkolmoghaddam

Thesis: Effects of Automated Fiber Placement on High Strain Rate Compressive Response of Advanced Composites , Alexander Trochez

Thesis: A Monolithic Internal Strain-Gage Balance Design Based on Design for Manufacturability , Thomas Ladson Webb III

Dissertation: A Stepwise Compression-Relaxation Testing Method for Tissue Characterization and Tumor Detection Via a Two-Dimensional Tactile Sensor , Yichao Yang

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines
• Author Guidelines
• MAE Website
• Other Digital Collections
• ODU Libraries
• Old Dominion University

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

Dissertation

Research Paper

• Testimonials

Research Papers

Dissertations

Term Papers

Engineering Thesis Writing Help

Undoubtedly an Engineering thesis may be one of the most demanding types of research papers to complete. It is not just to the research and experimentation that the writer of the thesis needs to studiously apply himself. Likewise, the writing of the thesis itself has restrictions against personal tones and the use of layman’s words where technical terms exist.

Engineering Thesis Page Navigation

Download free sample of writing tips on engineering thesis.

• Technical Engineering Thesis

Civil Engineering Thesis

• How We Can Help
• Engineering Thesis Format
• Electrical Engineering Thesis

Mechanical Engineering Thesis

Engineering Thesis Proposal Outline Sample (Click the image to enlarge)

Study of the design, construction and operation of any machinery is called mechanical engineering. It uses the principles of physics and material sciences for the manufacture and development of a mechanical system. One of the oldest branches in engineering, mechanical engineering is considered evergreen and in demand.

This is a highly recommended academic area and there has been a steady growth in the industry.

A mechanical engineering thesis means in depth knowledge and research of a topic in mechanical engineering. This would involve experimentation and inventions too.

The topic you choose has to be new and innovative.

It can be based on kinematics, robotics, mechatronics, thermal sciences, thermal dynamics and many more. Or topics can be sought from the mechanical industrial sectors like automobile industry, robotics, airliners, watercrafts, heating and cooling systems etc.

P rof E ssays.com with over 500 expert writers in its employment can provide you with a very decent mechanical engineering thesis. We guarantee you of delivering on time. You will not feel the pinch in your pocket. Our charges are not high. Call us or fax us or email us or book online today in case you wish to utilise our services. P rof E ssays.com is always at your disposal for your services.

How Can We Help

Civil engineering deals with the planning, designing and constructing and maintaining of public places like airports, bridges, dams, flyovers, warehouses, highways, canals etc.

P rof E ssays.com , since its inception in 2003, has appointed all expert, skilled writers, qualified from the best universities to give you the best of works. Writing a construction engineering thesis for you is just another of the daily work done by us. We will give you the best of our services as we want you back again and again with new work as our valued repeat customer.

P rof E ssays.com can suggest a few construction engineering thesis topics for you

• Design a hydroelectric dam evaluating rain and rainwater volume
• Calculation of the rain flow in large areas
• Ethics of civil engineering
• Causes and effects of delays in construction.

P rof E ssays.com undertakes to write not only thesis, but also guarantees to give you excellent write ups on essays, term papers, dissertations, resumes, reports and so on.

Writing a thesis is not easy. It requires lots and lots of patient research with accurate information. We at P rof E ssays.com are with you all the way once you place your order. Our in house customer service is available round the clock 24/7 to serve you and keep you updated.

Engineering thesis format

Engineering is a technical course and the thesis formats for this varies a little when compared to other curriculum. Most universities specify their own formats for thesis writing but a tentative engineering thesis format is suggested here by P rof E ssays.com , the leading online essay writing service.

• Introduction
• Introduce the thesis problem here, explain why it is worth pursuing.
• Make your thesis statement here explaining what you wish to prove or make a claim to.
• Main body of the thesis
• The chapters with the content
• Figures and charts
• The same as the thesis statement
• Bibliography

Apart from this it is important to bear in mind that fonts, spaces, paragraphs, page numbering, margins, headers and footers etc are as per your university specifications.

All this and more will be taken care of by P rof E ssays.com if you place an order for a thesis from us.

Benefit of placing order from us

• On time delivery of thesis
• Within 8 hours delivery in case of emergency
• No plagiarism, original content
• Privacy guaranteed
• Confidentiality maintained
• Any queries from you will be answered by our customer service centre
• Expert, qualified writers

Electrical engineering thesis

Study and usage of electricity, electronics, telecommunications and electro magnetism in our day to day life is called study of electrical engineering. The contribution of electrical engineering to the development of technology is immense. A few examples of where electrical and electronic parts are used are computers, laptops, mobile phones, radars, digital cameras, remotes, scanners, televisions, recorders, DVD players, printers and many more. The world runs on electrical engineering. The designing, development, testing and supervision of electrical systems are in the hands of an electrical engineer.

P rof E ssays.com offers to write for you a customized electrical engineering thesis at affordable rates. We are available 24/7 to serve you. We guarantee you of delivery of the essay within the stipulated time.

P rof E ssays.com is a leading custom research paper writing company. We understand the pressures you as a student undergo. As an electrical engineering student you will be required to submit term papers, thesis or research papers. You can buy your electrical engineering thesis paper from us. You can refer to us as a resource and nobody will accuse you of copyright violation.

In case you wish to take our services just visit us at P rof E ssays.com . You can chat with our 24 /7 customer service team and place your order.

P rof E ssays.com itself has established itself in the trust of its many clients as a leading provider of custom essay writing help. If you have reason to apply for assistance in the completion of your engineering thesis , why not drop in to their website and inquire. The customer support module is very fast and equally friendly. If you should wish to avail yourself of a template for your custom thesis , you can get one at a very affordable price. If on the other hand, you already have a draft of the engineering thesis , P rof E ssays.com can put the talent of its writers to complete it for you. You can expect the highest standards of academic writing to be followed in your paper. All your specifications will be used as their style and formatting guide. Your paper will be checked for all types of plagiarism before it is handed over to you.

As you can see, with P rof E ssays.com you are in competent, sympathetic and conscientious hands. Why not drop in to their website today and let them do the worrying for you?The writers of P rof E ssays.com are all distinguished by masters or bachelors degrees in their respective disciplines. They are not only versed in the theory of their field of knowledge but likewise in its practical applications. Just as equally they are experienced in writing analysis essays , a historical thesis, a business thesis or any other type of essay .

In readying your tentative copy of the engineering thesis :

• Identify a focus within which you can conduct research and experimentation on.
• Aim for objectives that you want to achieve in making your engineering thesis .
• Select the right methodologies to use in your experiment and viable tools which should be available for the experiment.
• Engage the study and carefully jot out results.
• Discuss the results with your partners, if any, and draw the logical conclusions from them. Write down the degree to which the experimentation corroborated your initial argument and the degree to which it did not.
• Accomplish the initial version of your thesis in the apt format.

When you have done all of the above, you can approach P rof E ssays.com to assign a writer to facilitate the writing of the final version of the engineering thesis . You will be charged an extremely nominal fee. Within the time limit you specify, you can expect a masterfully done engineering paper in your hands. If after previewing it to your adviser, additional revisions are needed, they will be happy to accommodate such changes for free.

In order to protect you, all the information submitted in the process will be kept secure and in strict confidentiality. This includes, mainly, the access codes of your credit cards.

note: “ ProfEssays.com is an outstanding custom writing company. We have over 500 expert writers with PhD and Masters level educations who are all ready to fulfill your writing needs no matter what the academic level or research topic. Just imagine, you place the order before you go to sleep and in the morning an excellent, 100% unique essay ! or term paper, written in strict accordance with your instructions by a professional writer is already in your email box! We understand the pressure students are under to achieve high academic goals and we are ready to take some of it off you because we love writing. By choosing us as your partner, you achieve more academically and gain valuable time for your other interests. Place your order now !”

Looking for an exceptional company to do some custom writing for you? Look no further than ProfEssays.com! You simply place an order with the writing instructions you have been given, and before you know it, your essay or term paper, completely finished and unique, will be completed and sent back to you. At ProfEssays.com, we have over 500 highly educated, professional writers standing by waiting to help you with any writing needs you may have! We understand students have plenty on their plates, which is why we love to help them out. Let us do the work for you, so you have time to do what you want to do!

• Customers' Testimonials
• Custom Book Report
• Help with Case Studies
• Personal Essays
• Custom Movie Review
• Narrative Essays
• Argumentative Essays
• Homework Help
• Essay Format
• Essay Outline
• Essay Topics
• Essay Questions
• How to Write a Research Paper
• Research Paper Format
• Research Paper Introduction
• Research Paper Outline
• Research Paper Abstract
• Research Paper Topics

Client Lounge

Deadline approaching.

Engineering Thesis

26 Feb 2024 - 23 Feb 2025

Departmental Approval required.

An externally examined piece of written work that reports on the findings of supervised research.

Teaching Periods and Locations

If your paper outline is not linked below, try the previous year's version of this paper .

Indicative Fees

You will be sent an enrolment agreement which will confirm your fees. Tuition fees shown are indicative only and may change. There are additional fees and charges related to enrolment - please see the  Table of Fees and Charges for more information.

Available subjects

Engineering, additional information.

Subject regulations

• Paper details current as of 27 Jan 2024 23:56pm
• Indicative fees current as of 9 Apr 2024 01:30am

You’re viewing this website as a international student

You’re currently viewing the website as a International student, you might want to change to domestic.

You're an International student if you are:

• Intending to study on a student visa
• Not a citizen of New Zealand or Australia

You're a domestic student if you are:

• A citizen of New Zealand or Australia
• A New Zealand permanent resident