how to write abstract and introduction in research

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

• Manuscript Preparation

Differentiating between the abstract and the introduction of a research paper

• 3 minute read
• 41.6K views

Table of Contents

While writing a manuscript for the first time, you might find yourself confused about the differences between an abstract and the introduction. Both are adjacent sections of a research paper and share certain elements. However, they serve entirely different purposes. So, how does one ensure that these sections are written correctly?

Knowing the intended purpose of the abstract and the introduction is a good start!

What is an abstract?

An abstract is a very short summary of all the sections of your research paper—the introduction, objectives, materials and methods, results, and conclusion. It ends by emphasising the novelty or relevance of your study, or by posing questions for future research. The abstract should cover all important aspects of the study, so that the reader can quickly decide if the paper is of their interest or not.

In simple terms, just like a restaurant’s menu that provides an overview of all available dishes, an abstract gives the reader an idea of what the research paper has to offer. Most journals have a strict word limit for abstracts, which is usually 10% of the research paper.

What is the purpose of an abstract?

The abstract should ideally induce curiosity in the reader’s mind and contain strategic keywords. By generating curiosity and interest, an abstract can push readers to read the entire paper or buy it if it is behind a paywall. By using keywords strategically in the abstract, authors can improve the chances of their paper appearing in online searches.

What is an introduction?

The introduction is the first section in a research paper after the abstract, which describes in detail the background information that is necessary for the reader to understand the topic and aim of the study.

What is the purpose of an introduction?

The introduction points to specific gaps in knowledge and explains how the study addresses these gaps. It lists previous studies in a chronological order, complete with citations, to explain why the study was warranted.

A good introduction sets the context for your study and clearly distinguishes between the knowns and the unknowns in a research topic.

Often, the introduction mentions the materials and methods used in a study and outlines the hypotheses tested. Both the abstract and the introduction have this in common. So, what are the key differences between the two sections?

Key differences between an abstract and the introduction:

• The word limit for an abstract is usually 250 words or less. In contrast, the typical word limit for an introduction is 500 words or more.
• When writing the abstract, it is essential to use keywords to make the paper more visible to search engines. This is not a significant concern when writing the introduction.
• The abstract features a summary of the results and conclusions of your study, while the introduction does not. The abstract, unlike the introduction, may also suggest future directions for research.
• While a short review of previous research features in both the abstract and the introduction, it is more elaborate in the latter.
• All references to previous research in the introduction come with citations. The abstract does not mention specific studies, although it may briefly outline previous research.
• The abstract always comes before the introduction in a research paper.
• Every paper does not need an abstract. However, an introduction is an essential component of all research papers.

If you are still confused about how to write the abstract and the introduction of your research paper while accounting for the differences between them, head over to Elsevier Author Services . Our experts will be happy to guide you throughout your research journey, with useful advice on how to write high quality research papers and get them published in reputed journals!

• Research Process

Scholarly Sources: What are They and Where can You Find Them?

What are Implications in Research?

You may also like.

Make Hook, Line, and Sinker: The Art of Crafting Engaging Introductions

Can Describing Study Limitations Improve the Quality of Your Paper?

A Guide to Crafting Shorter, Impactful Sentences in Academic Writing

6 Steps to Write an Excellent Discussion in Your Manuscript

How to Write Clear and Crisp Civil Engineering Papers? Here are 5 Key Tips to Consider

The Clear Path to An Impactful Paper: ②

The Essentials of Writing to Communicate Research in Medicine

Changing Lines: Sentence Patterns in Academic Writing

Input your search keywords and press Enter.

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

Abstract Writing: A Step-by-Step Guide With Tips & Examples

Table of Contents

Introduction

Abstracts of research papers have always played an essential role in describing your research concisely and clearly to researchers and editors of journals, enticing them to continue reading. However, with the widespread availability of scientific databases, the need to write a convincing abstract is more crucial now than during the time of paper-bound manuscripts.

Abstracts serve to "sell" your research and can be compared with your "executive outline" of a resume or, rather, a formal summary of the critical aspects of your work. Also, it can be the "gist" of your study. Since most educational research is done online, it's a sign that you have a shorter time for impressing your readers, and have more competition from other abstracts that are available to be read.

The APCI (Academic Publishing and Conferences International) articulates 12 issues or points considered during the final approval process for conferences & journals and emphasises the importance of writing an abstract that checks all these boxes (12 points). Since it's the only opportunity you have to captivate your readers, you must invest time and effort in creating an abstract that accurately reflects the critical points of your research.

With that in mind, let’s head over to understand and discover the core concept and guidelines to create a substantial abstract. Also, learn how to organise the ideas or plots into an effective abstract that will be awe-inspiring to the readers you want to reach.

What is Abstract? Definition and Overview

The word "Abstract' is derived from Latin abstractus meaning "drawn off." This etymological meaning also applies to art movements as well as music, like abstract expressionism. In this context, it refers to the revealing of the artist's intention.

Based on this, you can determine the meaning of an abstract: A condensed research summary. It must be self-contained and independent of the body of the research. However, it should outline the subject, the strategies used to study the problem, and the methods implemented to attain the outcomes. The specific elements of the study differ based on the area of study; however, together, it must be a succinct summary of the entire research paper.

Abstracts are typically written at the end of the paper, even though it serves as a prologue. In general, the abstract must be in a position to:

• Describe the paper.
• Identify the problem or the issue at hand.
• Explain to the reader the research process, the results you came up with, and what conclusion you've reached using these results.
• Include keywords to guide your strategy and the content.

Furthermore, the abstract you submit should not reflect upon any of  the following elements:

• Examine, analyse or defend the paper or your opinion.
• What you want to study, achieve or discover.
• Be redundant or irrelevant.

After reading an abstract, your audience should understand the reason - what the research was about in the first place, what the study has revealed and how it can be utilised or can be used to benefit others. You can understand the importance of abstract by knowing the fact that the abstract is the most frequently read portion of any research paper. In simpler terms, it should contain all the main points of the research paper.

What is the Purpose of an Abstract?

Abstracts are typically an essential requirement for research papers; however, it's not an obligation to preserve traditional reasons without any purpose. Abstracts allow readers to scan the text to determine whether it is relevant to their research or studies. The abstract allows other researchers to decide if your research paper can provide them with some additional information. A good abstract paves the interest of the audience to pore through your entire paper to find the content or context they're searching for.

Abstract writing is essential for indexing, as well. The Digital Repository of academic papers makes use of abstracts to index the entire content of academic research papers. Like meta descriptions in the regular Google outcomes, abstracts must include keywords that help researchers locate what they seek.

Types of Abstract

Informative and Descriptive are two kinds of abstracts often used in scientific writing.

A descriptive abstract gives readers an outline of the author's main points in their study. The reader can determine if they want to stick to the research work, based on their interest in the topic. An abstract that is descriptive is similar to the contents table of books, however, the format of an abstract depicts complete sentences encapsulated in one paragraph. It is unfortunate that the abstract can't be used as a substitute for reading a piece of writing because it's just an overview, which omits readers from getting an entire view. Also, it cannot be a way to fill in the gaps the reader may have after reading this kind of abstract since it does not contain crucial information needed to evaluate the article.

To conclude, a descriptive abstract is:

• A simple summary of the task, just summarises the work, but some researchers think it is much more of an outline
• Typically, the length is approximately 100 words. It is too short when compared to an informative abstract.
• A brief explanation but doesn't provide the reader with the complete information they need;
• An overview that omits conclusions and results

An informative abstract is a comprehensive outline of the research. There are times when people rely on the abstract as an information source. And the reason is why it is crucial to provide entire data of particular research. A well-written, informative abstract could be a good substitute for the remainder of the paper on its own.

A well-written abstract typically follows a particular style. The author begins by providing the identifying information, backed by citations and other identifiers of the papers. Then, the major elements are summarised to make the reader aware of the study. It is followed by the methodology and all-important findings from the study. The conclusion then presents study results and ends the abstract with a comprehensive summary.

In a nutshell, an informative abstract:

• Has a length that can vary, based on the subject, but is not longer than 300 words.
• Contains all the content-like methods and intentions
• Offers evidence and possible recommendations.

Informative Abstracts are more frequent than descriptive abstracts because of their extensive content and linkage to the topic specifically. You should select different types of abstracts to papers based on their length: informative abstracts for extended and more complex abstracts and descriptive ones for simpler and shorter research papers.

What are the Characteristics of a Good Abstract?

• A good abstract clearly defines the goals and purposes of the study.
• It should clearly describe the research methodology with a primary focus on data gathering, processing, and subsequent analysis.
• A good abstract should provide specific research findings.
• It presents the principal conclusions of the systematic study.
• It should be concise, clear, and relevant to the field of study.
• A well-designed abstract should be unifying and coherent.
• It is easy to grasp and free of technical jargon.
• It is written impartially and objectively.

What are the various sections of an ideal Abstract?

By now, you must have gained some concrete idea of the essential elements that your abstract needs to convey . Accordingly, the information is broken down into six key sections of the abstract, which include:

An Introduction or Background

Research methodology, objectives and goals, limitations.

Let's go over them in detail.

The introduction, also known as background, is the most concise part of your abstract. Ideally, it comprises a couple of sentences. Some researchers only write one sentence to introduce their abstract. The idea behind this is to guide readers through the key factors that led to your study.

It's understandable that this information might seem difficult to explain in a couple of sentences. For example, think about the following two questions like the background of your study:

• What is currently available about the subject with respect to the paper being discussed?
• What isn't understood about this issue? (This is the subject of your research)

While writing the abstract’s introduction, make sure that it is not lengthy. Because if it crosses the word limit, it may eat up the words meant to be used for providing other key information.

Research methodology is where you describe the theories and techniques you used in your research. It is recommended that you describe what you have done and the method you used to get your thorough investigation results. Certainly, it is the second-longest paragraph in the abstract.

In the research methodology section, it is essential to mention the kind of research you conducted; for instance, qualitative research or quantitative research (this will guide your research methodology too) . If you've conducted quantitative research, your abstract should contain information like the sample size, data collection method, sampling techniques, and duration of the study. Likewise, your abstract should reflect observational data, opinions, questionnaires (especially the non-numerical data) if you work on qualitative research.

The research objectives and goals speak about what you intend to accomplish with your research. The majority of research projects focus on the long-term effects of a project, and the goals focus on the immediate, short-term outcomes of the research. It is possible to summarise both in just multiple sentences.

In stating your objectives and goals, you give readers a picture of the scope of the study, its depth and the direction your research ultimately follows. Your readers can evaluate the results of your research against the goals and stated objectives to determine if you have achieved the goal of your research.

In the end, your readers are more attracted by the results you've obtained through your study. Therefore, you must take the time to explain each relevant result and explain how they impact your research. The results section exists as the longest in your abstract, and nothing should diminish its reach or quality.

One of the most important things you should adhere to is to spell out details and figures on the results of your research.

Instead of making a vague assertion such as, "We noticed that response rates varied greatly between respondents with high incomes and those with low incomes", Try these: "The response rate was higher for high-income respondents than those with lower incomes (59 30 percent vs. 30 percent in both cases; P<0.01)."

You're likely to encounter certain obstacles during your research. It could have been during data collection or even during conducting the sample . Whatever the issue, it's essential to inform your readers about them and their effects on the research.

Research limitations offer an opportunity to suggest further and deep research. If, for instance, you were forced to change for convenient sampling and snowball samples because of difficulties in reaching well-suited research participants, then you should mention this reason when you write your research abstract. In addition, a lack of prior studies on the subject could hinder your research.

Your conclusion should include the same number of sentences to wrap the abstract as the introduction. The majority of researchers offer an idea of the consequences of their research in this case.

Your conclusion should include three essential components:

• A significant take-home message.
• Corresponding important findings.
• The Interpretation.

Even though the conclusion of your abstract needs to be brief, it can have an enormous influence on the way that readers view your research. Therefore, make use of this section to reinforce the central message from your research. Be sure that your statements reflect the actual results and the methods you used to conduct your research.

Good Abstract Examples

Abstract example #1.

Children’s consumption behavior in response to food product placements in movies.

The abstract:

"Almost all research into the effects of brand placements on children has focused on the brand's attitudes or behavior intentions. Based on the significant differences between attitudes and behavioral intentions on one hand and actual behavior on the other hand, this study examines the impact of placements by brands on children's eating habits. Children aged 6-14 years old were shown an excerpt from the popular film Alvin and the Chipmunks and were shown places for the item Cheese Balls. Three different versions were developed with no placements, one with moderately frequent placements and the third with the highest frequency of placement. The results revealed that exposure to high-frequency places had a profound effect on snack consumption, however, there was no impact on consumer attitudes towards brands or products. The effects were not dependent on the age of the children. These findings are of major importance to researchers studying consumer behavior as well as nutrition experts as well as policy regulators."

Abstract Example #2

Social comparisons on social media: The impact of Facebook on young women’s body image concerns and mood. The abstract:

"The research conducted in this study investigated the effects of Facebook use on women's moods and body image if the effects are different from an internet-based fashion journal and if the appearance comparison tendencies moderate one or more of these effects. Participants who were female ( N = 112) were randomly allocated to spend 10 minutes exploring their Facebook account or a magazine's website or an appearance neutral control website prior to completing state assessments of body dissatisfaction, mood, and differences in appearance (weight-related and facial hair, face, and skin). Participants also completed a test of the tendency to compare appearances. The participants who used Facebook were reported to be more depressed than those who stayed on the control site. In addition, women who have the tendency to compare appearances reported more facial, hair and skin-related issues following Facebook exposure than when they were exposed to the control site. Due to its popularity it is imperative to conduct more research to understand the effect that Facebook affects the way people view themselves."

Abstract Example #3

The Relationship Between Cell Phone Use and Academic Performance in a Sample of U.S. College Students

"The cellphone is always present on campuses of colleges and is often utilised in situations in which learning takes place. The study examined the connection between the use of cell phones and the actual grades point average (GPA) after adjusting for predictors that are known to be a factor. In the end 536 students in the undergraduate program from 82 self-reported majors of an enormous, public institution were studied. Hierarchical analysis ( R 2 = .449) showed that use of mobile phones is significantly ( p < .001) and negative (b equal to -.164) connected to the actual college GPA, after taking into account factors such as demographics, self-efficacy in self-regulated learning, self-efficacy to improve academic performance, and the actual high school GPA that were all important predictors ( p < .05). Therefore, after adjusting for other known predictors increasing cell phone usage was associated with lower academic performance. While more research is required to determine the mechanisms behind these results, they suggest the need to educate teachers and students to the possible academic risks that are associated with high-frequency mobile phone usage."

Quick tips on writing a good abstract

There exists a common dilemma among early age researchers whether to write the abstract at first or last? However, it's recommended to compose your abstract when you've completed the research since you'll have all the information to give to your readers. You can, however, write a draft at the beginning of your research and add in any gaps later.

If you find abstract writing a herculean task, here are the few tips to help you with it:

1. Always develop a framework to support your abstract

Before writing, ensure you create a clear outline for your abstract. Divide it into sections and draw the primary and supporting elements in each one. You can include keywords and a few sentences that convey the essence of your message.

2. Review Other Abstracts

Abstracts are among the most frequently used research documents, and thousands of them were written in the past. Therefore, prior to writing yours, take a look at some examples from other abstracts. There are plenty of examples of abstracts for dissertations in the dissertation and thesis databases.

3. Avoid Jargon To the Maximum

When you write your abstract, focus on simplicity over formality. You should  write in simple language, and avoid excessive filler words or ambiguous sentences. Keep in mind that your abstract must be readable to those who aren't acquainted with your subject.

4. Focus on Your Research

It's a given fact that the abstract you write should be about your research and the findings you've made. It is not the right time to mention secondary and primary data sources unless it's absolutely required.

Conclusion: How to Structure an Interesting Abstract?

Abstracts are a short outline of your essay. However, it's among the most important, if not the most important. The process of writing an abstract is not straightforward. A few early-age researchers tend to begin by writing it, thinking they are doing it to "tease" the next step (the document itself). However, it is better to treat it as a spoiler.

The simple, concise style of the abstract lends itself to a well-written and well-investigated study. If your research paper doesn't provide definitive results, or the goal of your research is questioned, so will the abstract. Thus, only write your abstract after witnessing your findings and put your findings in the context of a larger scenario.

The process of writing an abstract can be daunting, but with these guidelines, you will succeed. The most efficient method of writing an excellent abstract is to centre the primary points of your abstract, including the research question and goals methods, as well as key results.

Interested in learning more about dedicated research solutions? Go to the SciSpace product page to find out how our suite of products can help you simplify your research workflows so you can focus on advancing science.

The best-in-class solution is equipped with features such as literature search and discovery, profile management, research writing and formatting, and so much more.

But before you go,

You might also like.

Consensus GPT vs. SciSpace GPT: Choose the Best GPT for Research

Literature Review and Theoretical Framework: Understanding the Differences

Types of Essays in Academic Writing

When you choose to publish with PLOS, your research makes an impact. Make your work accessible to all, without restrictions, and accelerate scientific discovery with options like preprints and published peer review that make your work more Open.

• PLOS Biology
• PLOS Climate
• PLOS Complex Systems
• PLOS Computational Biology
• PLOS Digital Health
• PLOS Genetics
• PLOS Global Public Health
• PLOS Medicine
• PLOS Mental Health
• PLOS Neglected Tropical Diseases
• PLOS Pathogens
• PLOS Sustainability and Transformation
• PLOS Collections
• How to Write an Abstract

Expedite peer review, increase search-ability, and set the tone for your study

The abstract is your chance to let your readers know what they can expect from your article. Learn how to write a clear, and concise abstract that will keep your audience reading.

How your abstract impacts editorial evaluation and future readership

After the title , the abstract is the second-most-read part of your article. A good abstract can help to expedite peer review and, if your article is accepted for publication, it’s an important tool for readers to find and evaluate your work. Editors use your abstract when they first assess your article. Prospective reviewers see it when they decide whether to accept an invitation to review. Once published, the abstract gets indexed in PubMed and Google Scholar , as well as library systems and other popular databases. Like the title, your abstract influences keyword search results. Readers will use it to decide whether to read the rest of your article. Other researchers will use it to evaluate your work for inclusion in systematic reviews and meta-analysis. It should be a concise standalone piece that accurately represents your research. 

What to include in an abstract

The main challenge you’ll face when writing your abstract is keeping it concise AND fitting in all the information you need. Depending on your subject area the journal may require a structured abstract following specific headings. A structured abstract helps your readers understand your study more easily. If your journal doesn’t require a structured abstract it’s still a good idea to follow a similar format, just present the abstract as one paragraph without headings. 

Background or Introduction – What is currently known? Start with a brief, 2 or 3 sentence, introduction to the research area. 

Objectives or Aims – What is the study and why did you do it? Clearly state the research question you’re trying to answer.

Methods – What did you do? Explain what you did and how you did it. Include important information about your methods, but avoid the low-level specifics. Some disciplines have specific requirements for abstract methods. 

• CONSORT for randomized trials.
• STROBE for observational studies
• PRISMA for systematic reviews and meta-analyses

Results – What did you find? Briefly give the key findings of your study. Include key numeric data (including confidence intervals or p values), where possible.

Conclusions – What did you conclude? Tell the reader why your findings matter, and what this could mean for the ‘bigger picture’ of this area of research. 

Writing tips

The main challenge you may find when writing your abstract is keeping it concise AND convering all the information you need to.

• Keep it concise and to the point. Most journals have a maximum word count, so check guidelines before you write the abstract to save time editing it later.
• Write for your audience. Are they specialists in your specific field? Are they cross-disciplinary? Are they non-specialists? If you’re writing for a general audience, or your research could be of interest to the public keep your language as straightforward as possible. If you’re writing in English, do remember that not all of your readers will necessarily be native English speakers.
• Focus on key results, conclusions and take home messages.
• Write your paper first, then create the abstract as a summary.
• Check the journal requirements before you write your abstract, eg. required subheadings.
• Include keywords or phrases to help readers search for your work in indexing databases like PubMed or Google Scholar.
• Double and triple check your abstract for spelling and grammar errors. These kind of errors can give potential reviewers the impression that your research isn’t sound, and can make it easier to find reviewers who accept the invitation to review your manuscript. Your abstract should be a taste of what is to come in the rest of your article.

Don’t

• Sensationalize your research.
• Speculate about where this research might lead in the future.
• Use abbreviations or acronyms (unless absolutely necessary or unless they’re widely known, eg. DNA).
• Repeat yourself unnecessarily, eg. “Methods: We used X technique. Results: Using X technique, we found…”
• Contradict anything in the rest of your manuscript.
• Include content that isn’t also covered in the main manuscript.
• Include citations or references.

Tip: How to edit your work

Editing is challenging, especially if you are acting as both a writer and an editor. Read our guidelines for advice on how to refine your work, including useful tips for setting your intentions, re-review, and consultation with colleagues.

• How to Write a Great Title
• How to Write Your Methods
• How to Report Statistics
• How to Write Discussions and Conclusions
• How to Edit Your Work

The contents of the Peer Review Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

The contents of the Writing Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

There’s a lot to consider when deciding where to submit your work. Learn how to choose a journal that will help your study reach its audience, while reflecting your values as a researcher…

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Research paper

Writing a Research Paper Introduction | Step-by-Step Guide

Published on September 24, 2022 by Jack Caulfield . Revised on March 27, 2023.

The introduction to a research paper is where you set up your topic and approach for the reader. It has several key goals:

• Present your topic and get the reader interested
• Provide background or summarize existing research
• Position your own approach
• Detail your specific research problem and problem statement
• Give an overview of the paper’s structure

The introduction looks slightly different depending on whether your paper presents the results of original empirical research or constructs an argument by engaging with a variety of sources.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Step 1: introduce your topic, step 2: describe the background, step 3: establish your research problem, step 4: specify your objective(s), step 5: map out your paper, research paper introduction examples, frequently asked questions about the research paper introduction.

The first job of the introduction is to tell the reader what your topic is and why it’s interesting or important. This is generally accomplished with a strong opening hook.

The hook is a striking opening sentence that clearly conveys the relevance of your topic. Think of an interesting fact or statistic, a strong statement, a question, or a brief anecdote that will get the reader wondering about your topic.

For example, the following could be an effective hook for an argumentative paper about the environmental impact of cattle farming:

A more empirical paper investigating the relationship of Instagram use with body image issues in adolescent girls might use the following hook:

Don’t feel that your hook necessarily has to be deeply impressive or creative. Clarity and relevance are still more important than catchiness. The key thing is to guide the reader into your topic and situate your ideas.

Prevent plagiarism. Run a free check.

This part of the introduction differs depending on what approach your paper is taking.

In a more argumentative paper, you’ll explore some general background here. In a more empirical paper, this is the place to review previous research and establish how yours fits in.

Argumentative paper: Background information

After you’ve caught your reader’s attention, specify a bit more, providing context and narrowing down your topic.

Provide only the most relevant background information. The introduction isn’t the place to get too in-depth; if more background is essential to your paper, it can appear in the body .

Empirical paper: Describing previous research

For a paper describing original research, you’ll instead provide an overview of the most relevant research that has already been conducted. This is a sort of miniature literature review —a sketch of the current state of research into your topic, boiled down to a few sentences.

This should be informed by genuine engagement with the literature. Your search can be less extensive than in a full literature review, but a clear sense of the relevant research is crucial to inform your own work.

Begin by establishing the kinds of research that have been done, and end with limitations or gaps in the research that you intend to respond to.

The next step is to clarify how your own research fits in and what problem it addresses.

Argumentative paper: Emphasize importance

In an argumentative research paper, you can simply state the problem you intend to discuss, and what is original or important about your argument.

Empirical paper: Relate to the literature

In an empirical research paper, try to lead into the problem on the basis of your discussion of the literature. Think in terms of these questions:

• What research gap is your work intended to fill?
• What limitations in previous work does it address?
• What contribution to knowledge does it make?

You can make the connection between your problem and the existing research using phrases like the following.

Now you’ll get into the specifics of what you intend to find out or express in your research paper.

The way you frame your research objectives varies. An argumentative paper presents a thesis statement, while an empirical paper generally poses a research question (sometimes with a hypothesis as to the answer).

Argumentative paper: Thesis statement

The thesis statement expresses the position that the rest of the paper will present evidence and arguments for. It can be presented in one or two sentences, and should state your position clearly and directly, without providing specific arguments for it at this point.

Empirical paper: Research question and hypothesis

The research question is the question you want to answer in an empirical research paper.

Present your research question clearly and directly, with a minimum of discussion at this point. The rest of the paper will be taken up with discussing and investigating this question; here you just need to express it.

A research question can be framed either directly or indirectly.

• This study set out to answer the following question: What effects does daily use of Instagram have on the prevalence of body image issues among adolescent girls?
• We investigated the effects of daily Instagram use on the prevalence of body image issues among adolescent girls.

If your research involved testing hypotheses , these should be stated along with your research question. They are usually presented in the past tense, since the hypothesis will already have been tested by the time you are writing up your paper.

For example, the following hypothesis might respond to the research question above:

Scribbr Citation Checker New

The AI-powered Citation Checker helps you avoid common mistakes such as:

• Missing commas and periods
• Incorrect usage of “et al.”
• Ampersands (&) in narrative citations
• Missing reference entries

The final part of the introduction is often dedicated to a brief overview of the rest of the paper.

In a paper structured using the standard scientific “introduction, methods, results, discussion” format, this isn’t always necessary. But if your paper is structured in a less predictable way, it’s important to describe the shape of it for the reader.

If included, the overview should be concise, direct, and written in the present tense.

• This paper will first discuss several examples of survey-based research into adolescent social media use, then will go on to …
• This paper first discusses several examples of survey-based research into adolescent social media use, then goes on to …

Full examples of research paper introductions are shown in the tabs below: one for an argumentative paper, the other for an empirical paper.

• Argumentative paper
• Empirical paper

Are cows responsible for climate change? A recent study (RIVM, 2019) shows that cattle farmers account for two thirds of agricultural nitrogen emissions in the Netherlands. These emissions result from nitrogen in manure, which can degrade into ammonia and enter the atmosphere. The study’s calculations show that agriculture is the main source of nitrogen pollution, accounting for 46% of the country’s total emissions. By comparison, road traffic and households are responsible for 6.1% each, the industrial sector for 1%. While efforts are being made to mitigate these emissions, policymakers are reluctant to reckon with the scale of the problem. The approach presented here is a radical one, but commensurate with the issue. This paper argues that the Dutch government must stimulate and subsidize livestock farmers, especially cattle farmers, to transition to sustainable vegetable farming. It first establishes the inadequacy of current mitigation measures, then discusses the various advantages of the results proposed, and finally addresses potential objections to the plan on economic grounds.

The rise of social media has been accompanied by a sharp increase in the prevalence of body image issues among women and girls. This correlation has received significant academic attention: Various empirical studies have been conducted into Facebook usage among adolescent girls (Tiggermann & Slater, 2013; Meier & Gray, 2014). These studies have consistently found that the visual and interactive aspects of the platform have the greatest influence on body image issues. Despite this, highly visual social media (HVSM) such as Instagram have yet to be robustly researched. This paper sets out to address this research gap. We investigated the effects of daily Instagram use on the prevalence of body image issues among adolescent girls. It was hypothesized that daily Instagram use would be associated with an increase in body image concerns and a decrease in self-esteem ratings.

The introduction of a research paper includes several key elements:

• A hook to catch the reader’s interest
• Relevant background on the topic
• Details of your research problem

and your problem statement

• A thesis statement or research question
• Sometimes an overview of the paper

Don’t feel that you have to write the introduction first. The introduction is often one of the last parts of the research paper you’ll write, along with the conclusion.

This is because it can be easier to introduce your paper once you’ve already written the body ; you may not have the clearest idea of your arguments until you’ve written them, and things can change during the writing process .

The way you present your research problem in your introduction varies depending on the nature of your research paper . A research paper that presents a sustained argument will usually encapsulate this argument in a thesis statement .

A research paper designed to present the results of empirical research tends to present a research question that it seeks to answer. It may also include a hypothesis —a prediction that will be confirmed or disproved by your research.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Caulfield, J. (2023, March 27). Writing a Research Paper Introduction | Step-by-Step Guide. Scribbr. Retrieved March 28, 2024, from https://www.scribbr.com/research-paper/research-paper-introduction/

Is this article helpful?

Jack Caulfield

Other students also liked, writing strong research questions | criteria & examples, writing a research paper conclusion | step-by-step guide, research paper format | apa, mla, & chicago templates, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

• Features for Creative Writers
• Features for Work
• Features for Higher Education
• Features for Teachers
• Features for Non-Native Speakers
• Learn Blog Grammar Guide Community Events FAQ
• Grammar Guide

How to Write an Abstract (With Examples)

Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Get started with ProWritingAid

Drop us a line or let's stay in touch via :

Community Blog

Keep up-to-date on postgraduate related issues with our quick reads written by students, postdocs, professors and industry leaders.

Abstract vs Introduction – Differences Explained

• By Dr Harry Hothi
• August 29, 2020

Any academic write up of a research study or project will require the inclusion of an abstract and introduction. If you pick up any example of a research paper for a journal, dissertation for a Masters degree or a PhD thesis, you’ll see the abstract, followed by the introduction. At first glance you’ll notice that the abstract is much shorter in length, typically a quarter or third of a page of A4. The introduction on the other hand is longer, taking up at least an entire page of writing.

Beyond the length, what are the differences in the content of the two sections? In short, the abstract is a summary of the entire study, describing the context, research aim, methods, results and key conclusions. The introduction gives more detail on the background of the subject area, the motivation for the study and states the aims and objectives.

Read on to learn more.

What is an Abstract?

The main purpose of an abstract is to succinctly give the reader an overview of why the study was needed, what the purpose of the project was, the research question, the key materials and methods that were used, the main results and what conclusions were drawn from this. Many abstracts also conclude with a sentence on the significance or impact of the research. These are sometimes also referred to as an executive summary.

The reader should have an understanding of the paper topic and what the study was about from the abstract alone. He or she can then decide if they want to read the paper or thesis in more detail.

Abstracts are particularly useful for researchers performing a literature review, which involves critically evaluating a large number of papers. Reading the abstract enables them to quickly ascertain the key points of a paper, helping them identify which ones to read in full.

Abstracts are also very important for learning more about the work performed in papers that are hidden behind academic journal paywalls (i.e. those that are not open access). Abstracts are always made freely available, allowing a researcher to understand the context and main point of the work and then decide if it’s worth paying to read the entire paper. These are sometimes referred to as the ‘de facto introduction’ to the research work as it’s usually the first section people read about your study, after the title page.

How do you Write an Abstract?

The majority of academic journals place a limit of 250 words on the length of the abstract in papers submitted to them. They do this to ensure you give a quick overview of only the most important information from your study, helping the reader decide if they want to read the whole paper too. Make sure you double check the specific requirements of your target journal before you start writing.

Universities or other academic institutions often allow up to 500 words for an abstract written for a doctoral thesis.

Abstracts can be either structured or unstructured in the way they are formatted. A structured abstract contains separate headings to guide the reader through the study. Virtually all STEM journals will require this format be used for a researcharticle. The exact names used for each heading can differ but generally there are defined as:

• Background. This is also sometimes called the Introduction. This section should give an overview of what is currently known about the research topic and what the gap in knowledge is. The reader should understand the problem your research will address; i.e. what was your study needed. Don’t include any references or citations in the abstract.
• Aim and Objective. Give a brief explanation of what the study intended to achieve and state the research question or questions that you proposed. Some authors also include the hypothesis here too.
• Materials and Methods. Use the methods section to describe what you investigated, what the study design was and how you carried it out.
• Results. Give an overview of your key findings.
• Discussion and Conclusion. Some journals may ask for these two terms to be used as separated headings. These sections explain why you may have obtained the results that you did, what this means and what the significance or impact of this might be.

An informative abstract should provide a concise summary of all the important points in your research project, including what the central question relating to the subject matter was. Make it interesting to read too; this may be the difference between your abstract being accepted or rejected if you decide to submit it to an upcoming conference. Reviewers for large conferences often have to read hundreds of abstracts so make sure yours stands out by being easy to read and follow.

It’s less common that you’ll be asked to write an unstructured abstract. If you are, however, be aware that the key difference is that an unstructured abstract does not include separate headings. The flow of the abstract text should still follow the 5 points listed above but they should all be written within one long paragraph.

What is the Introduction?

The introduction section is the first main written work presented after the abstract in your paper manuscript or thesis. In a research paper, the introduction will be followed by a section on the materials and methods. In thesis writing, the introduction will be followed by the literature review .

The main aim of introduction writing is to give the reader more detail on the background information of the study. It should include a brief description of the key current knowledge that exists based on the work presented in previous literature and where the gaps in knowledge are. The introduction should convey why your research was needed in order to add new understanding to your subject area. Make sure that you reference all the publications that you refer to.

When writing an introduction for a scientific paper you should also include the aim of your study and the research objectives/questions. If relevant, also include your hypothesis or (null hypothesis).

How do you Structure the Introduction?

The general rule of thumb for a research paper is to use size 12 Times New Roman font, double spaced. Write four separate paragraphs which together are no longer than one page in length. Structure the four paragraphs as follows:

• Set the context of the research study, giving background information about the subject area.
• Describe what is currently know from previously published work and what is poorly understood – i.e. the research gap.
• Explain how addressing this gap in knowledge is important for your research field – i.e. why this study is needed.
• Give a broad overview of the aims, objectives and hypothesis of the study.

You should not describe the research method used in this section nor any results and conclusions.

You should be clear now on what the differences between an abstract vs introduction are. The best way to improve your academic writing skills for these are to read other examples from other  research articles and start writing!

Is it really possible to do a PhD while working? The answer is ‘yes’, but it comes with several ‘buts’. Read our post to find out if it’s for you.

A well written figure legend will explain exactly what a figure means without having to refer to the main text. Our guide explains how to write one.

There are various types of research that are classified by objective, depth of study, analysed data and the time required to study the phenomenon etc.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Browse PhDs Now

Priya’s a 1st year PhD student University College Dublin. Her project involves investigating a novel seaweed-ensiling process as an alternative to drying to preserve seaweeds nutritional and monetary value.

Dr Ayres completed her PhD at the University of Warwick in 2017, researching the use of diamond to make electrochemical sensors. She is now a research scientists in the water industry, developing different analytical techniques and sensors to help keep our water systems safe.

Join Thousands of Students

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 25 March 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

Abstract Vs. Introduction — Do you know the difference?

Ross wants to publish his research. Feeling positive about his research outcomes, he begins to draft his manuscript. After completing the abstract, he proceeds to write the introduction. That’s when he pauses in confusion. Do the abstract and introduction mean the same? How is the content for both the sections different?

This is a dilemma faced by several young researchers while drafting their first manuscript. An  abstract  is similar to a summary except that it is more concise and direct. Whereas, the  introduction  section of your paper is more detailed. It states why you conducted your study, what you wanted to accomplish, and what is your hypothesis.

This blog will allow us to learn more about the difference between the abstract and the introduction.

What Is an Abstract for a Research Paper?

An abstract provides the reader with a clear description of your research study and its results without the reader having to read the entire paper. The details of a study, such as precise methods and measurements, are not necessarily mentioned in the abstract. The abstract is an important tool for researchers who must sift through hundreds of papers from their field of study.

The abstract  holds more significance  in articles without open access. Reading the abstract would give an idea of the articles, which would otherwise require monetary payment for access. In most cases, reviewers will read the abstract to decide whether to continue to review the paper, which is important for you.

Your abstract should begin with a background or objective to clearly state why the research was done, its importance to the field of study, and any previous roadblocks encountered. It should include a very concise version of your methods, results, and conclusions but no references. It must be brief while still providing enough information so that the reader need not read the full article. Most journals ask that the abstract be no more than 200–250 words long.

Format of an Abstract

There are two general   formats — structured and unstructured. A  structured abstract   helps the reader find pertinent information  very quickly. It is divided into sections clearly defined by headings as follows:

• Background : Latest information on the topic; key phrases that pique interest (e.g., “…the role of this enzyme has never been clearly understood”).
• Objective : The research goals; what the study examined and why.
• Methods : Brief description of the study (e.g., retrospective study).
• Results : Findings and observations.
• Conclusions : Were these results expected? Whether more research is needed or not?

Authors get tempted to write too much  in an abstract but it is helpful to remember that there is usually a maximum word count. The main point is to relay the important aspects of the study without sharing too many details so that the readers do not have to go through the entire manuscript text for finding more information.

The  unstructured abstract  is often used in fields of study that do not fall under the category of science. This type of abstracts does not have different sections. It summarizes the manuscript’s objectives, methods, etc., in one paragraph.

Related: Create an impressive manuscript with a compelling abstract.   Check out these resources and improve your abstract writing process!

Lastly, you must check the author guidelines of the target journal. It will describe the format required and the maximum word count of your abstract.

What Is an Introduction?

Your introduction is the first section of your research paper . It is not a repetition of the abstract. It does not provide data about methods, results, or conclusions. However, it  provides more in-depth information  on the background of the subject matter. It also explains your hypothesis , what you attempted to discover, or issues that you wanted to resolve. The introduction will also explain if and why your study is new in the subject field and why it is important.

It is often a good idea to wait until the rest of the paper is completed before drafting your introduction. This will help you to stay focused on the manuscript’s important points. The introduction, unlike the abstract, should contain citations to references. The information will help guide your readers through the rest of your document. The key tips for writing an effective introduction :

• Beginning:  The importance of the study.
• Tone/Tense:  Formal, impersonal; present tense.
• Content:  Brief description of manuscript but without results and conclusions.
• Length:  Generally up to four paragraphs. May vary slightly with journal guidelines.

Once you are sure that possible doubts on the difference between the abstract and introduction are clear, review and submit your manuscript.

What struggles have you had in writing an abstract or introduction? Were you able to resolve them? Please share your thoughts with us in the comments section below.

Insightful and educating Indeed. Thank You

Quite a helpful and precise for scholars and students alike. Keep it up…

thanks! very helpful.

thanks. helped

Greeting from Enago Academy! Thank you for your positive comment. We are glad to know that you found our resources useful. Your feedback is very valuable to us. Happy reading!

Really helpful as I prepare to write the introduction to my dissertation. Thank you Enago Academy

This gave me more detail finding the pieces of a research article being used for a critique paper in nursing school! thank you!

The guidelines have really assisted me with my assignment on writing argument essay on social media. The difference between the abstract and introduction is quite clear now for me to start my essay…thank you so much…

Quite helpful! I’m writing a paper on eyewitness testimony for one of my undergraduate courses at the University of Northern Colorado, and found this to be extremely helpful in clarifications

This was hugely helpful. Keep up the great work!

This was quite helpful. Keep it up!

Very comprehensive and simple. thanks

As a student, this website has helped me greatly to understand how to formally report my research

Thanks a lot.I can now handle my doubts after reading through.

thanks alot! this website has given me huge clarification on writing a good Introduction and Abttract i really appreciate what you share!. hope to see more to come1 God bless you.

Thank you, this was very helpful for writing my research paper!

That was helpful. geed job.

Thank you very much. This article really helped with my assignment.

Woohoo! Amazing. I couldnt stop listening to the audio; so enlightening.

Thank you for such a clear breakdown!

I am grateful for the assistance rendered me. I was mystified over the difference between an abstract and introduction during thesis writing. Now I have understood the concept theoretically, I will put that in practice. So thanks a lots it is great help to me.

Rate this article Cancel Reply

Your email address will not be published.

Enago Academy's Most Popular Articles

• AI in Academia
• Infographic
• Manuscripts & Grants
• Reporting Research
• Trending Now

Can AI Tools Prepare a Research Manuscript From Scratch? — A comprehensive guide

As technology continues to advance, the question of whether artificial intelligence (AI) tools can prepare…

• Old Webinars
• Webinar Mobile App

Demystifying Research Methodology With Field Experts

Choosing research methodology Research design and methodology Evidence-based research approach How RAxter can assist researchers

• Manuscript Preparation
• Publishing Research

How to Choose Best Research Methodology for Your Study

Successful research conduction requires proper planning and execution. While there are multiple reasons and aspects…

Top 5 Key Differences Between Methods and Methodology

While burning the midnight oil during literature review, most researchers do not realize that the…

如何准备高质量的金融和科技领域学术论文

如何寻找原创研究课题 快速定位目标文献的有效搜索策略 如何根据期刊指南准备手稿的对应部分 论文手稿语言润色实用技巧分享

How to Draft the Acknowledgment Section of a Manuscript

Discussion Vs. Conclusion: Know the Difference Before Drafting Manuscripts

Annex Vs. Appendix: Do You Know the Difference?

Sign-up to read more

Subscribe for free to get unrestricted access to all our resources on research writing and academic publishing including:

• 2000+ blog articles
• 50+ Webinars
• 10+ Expert podcasts
• 50+ Infographics
• 10+ Checklists
• Research Guides

We hate spam too. We promise to protect your privacy and never spam you.

I am looking for Editing/ Proofreading services for my manuscript Tentative date of next journal submission:

What should universities' stance be on AI tools in research and academic writing?

Office of Undergraduate Research

• Office of Undergraduate Research FAQ's
• URSA Engage
• Resources for Students
• Resources for Faculty
• Engaging in Research
• Presenting Your Research
• Earn Money by Participating in Research Studies
• Transcript Notation
• Student Publications

How to Write an Abstract

How to write an abstract for a conference, what is an abstract and why is it important, an abstract is a brief summary of your research or creative project, usually about a paragraph long (250-350 words), and is written when you are ready to present your research or included in a thesis or research publication..

For additional support in writing your abstract, you can contact the Office of URSA at [email protected]  or schedule a time to meet with a Writing and Research Consultant at the OSU Writing Center 

Main Components of an Abstract: 

The opening sentences should summarize your topic and describe what researchers already know, with reference to the literature. 

A brief discussion that clearly states the purpose of your research or creative project. This should give general background information on your work and allow people from different fields to understand what you are talking about. Use verbs like investigate, analyze, test, etc. to describe how you began your work. 

In this section you will be discussing the ways in which your research was performed and the type of tools or methodological techniques you used to conduct your research. 

This is where you describe the main findings of your research study and what you have learned. Try to include only the most important findings of your research that will allow the reader to understand your conclusions. If you have not completed the project, talk about your anticipated results and what you expect the outcomes of the study to be. 

Significance

This is the final section of your abstract where you summarize the work performed. This is where you also discuss the relevance of your work and how it advances your field and the scientific field in general.

• Your word count for a conference may be limited, so make your abstract as clear and concise as possible.
• Organize it by using good transition words found on the lef so the information flows well.
• Have your abstract proofread and receive feedback from your supervisor, advisor, peers, writing center, or other professors from different disciplines. 
• Double-check on the guidelines for your abstract and adhere to any formatting or word count requirements.
• Do not include bibliographic references or footnotes. 
• Avoid the overuse of technical terms or jargon. 

Feeling stuck? Visit the OSU ScholarsArchive for more abstract examples related to your field

Contact Info

618 Kerr Administration Building Corvallis, OR 97331

541-737-5105

Submit Manuscript

Easy Online Form

Get Newsletter

Sign Up Today

Abstract vs. Introduction: Key Elements for Successful Research Papers

Home » Blog » Abstract vs. Introduction: Key Elements for Successful Research Papers

Understanding the Purpose: Abstract and Introduction

When you’re diving into the world of scientific manuscripts, it’s like stepping into a whole new universe, right? Especially when it comes to crafting the perfect research paper. Now, let’s talk about two crucial parts of your paper – the Abstract and Introduction. They may seem similar at a glance, but trust me, they’re as different as apples and oranges.

First off, let’s clear the air about what each part is meant to do. The Abstract, in simple terms, is your research paper in a nutshell. It’s like a movie trailer – giving the audience (in this case, the readers) a quick preview of what’s in store. The goal? To lure them in and make them want to read the whole thing.

The Introduction, on the other hand, is more like the opening scene of the movie. It sets the stage, introduces the main characters (or key concepts), and starts to build up the story (your research). It’s your chance to grab the reader’s attention and give them a reason to stay.

So, why is understanding the difference between these two so crucial? Well, it’s simple. If you nail your Abstract, your paper is more likely to get picked up and read. Get your Introduction right, and your readers will stick around till the end.

In the next sections, we’re going to dissect each part, giving you the lowdown on how to make both your Abstract and Introduction stand out. We’ll be discussing how to structure them, what to include (and what not to), and some insider tips to make your research paper as compelling as possible.

The Abstract: A Snapshot of Your Research

Picture this: you’re at a busy conference, surrounded by countless research papers. What makes you pick one up? The Abstract. Think of the Abstract as your research’s elevator pitch. It’s short, sweet, and packs a punch. In a few concise sentences, it needs to summarize your entire study – the problem, methods, results, and conclusion. Phew, sounds like a tall order, right?

But fear not! Here’s how you can make your Abstract stand out:

• Be Concise : Usually, you have about 150-250 words to play with. Every word counts, so make them meaningful.
• Clarity is Key : Use plain language that can be easily understood by a broad audience. You’re not trying to impress with jargon; you’re trying to communicate effectively.
• Highlight the Big Stuff : Focus on the main aspects of your research. What was the problem? How did you approach it? What did you discover? And why does it matter?
• No Spoilers : While you need to include results, avoid the temptation to delve into detailed discussions or conclusions. Leave that for the main body of your paper.

Remember, a well-written Abstract can be the difference between someone reading your full paper or passing it by. It’s your first impression – make it count!

Crafting a Compelling Introduction

The Introduction is where the magic starts. It’s your opportunity to hook your readers and give them a glimpse of the exciting journey they’re about to embark on. Unlike the abstract, which is a bird’s-eye view of your study, the introduction is where you start zooming in.

Here’s how to craft an introduction that not only informs but also engages:

• Start with a Bang : Begin with a statement or a fact that grabs attention. It could be a startling statistic, a provocative question, or an intriguing quote. You want your reader to think, “Wow, I need to know more about this!”
• Set the Scene : Provide some background. Why is this research important? What’s the broader context? Think of it as setting the stage for your main act – your research.
• State the Problem : Clearly articulate the problem your research addresses. This helps readers understand the purpose and significance of your study.
• Outline Your Approach : Briefly mention how you’ve tackled the problem. This is a teaser, not the full story – you’ll get into the nitty-gritty in the methodology section.
• Establish the Thesis : What’s the main argument or hypothesis of your paper? The introduction is where this star should shine.
• Map It Out : Lastly, give your readers a roadmap of what to expect in the paper. It’s like showing them the menu before they enjoy the meal.

A compelling introduction sets the tone for the rest of your paper. It should be engaging, clear, and informative, leading your reader smoothly into the heart of your research.

Key Differences Between the Abstract and Introduction

Understanding the distinction between the abstract and introduction is crucial for any researcher. While they both serve important roles in your paper, they are fundamentally different in purpose and structure. Here’s a breakdown to help you differentiate the two:

• Purpose and Content : The abstract is a mini-version of your paper. It summarizes the entire research, including your findings and conclusions. The introduction, however, is more about setting up the research. It introduces the problem, provides background, and outlines the approach without revealing the conclusions.
• Length and Detail : Abstracts are typically much shorter, often limited to 250 words or less. They’re a quick read. The introduction, however, can be several pages long and provides a detailed background and rationale for the study.
• Audience Expectations : Readers often use the abstract to decide whether to read the full paper. It’s like a trailer to a movie. The introduction, on the other hand, is for those who’ve decided to watch the movie. It starts to tell the story in a more detailed and nuanced way.
• Writing Style : In an abstract, every word must count due to the word limit. It’s more factual and to the point. The introduction allows for a more narrative style, setting the scene and building a connection with the reader.
• Placement and Function : The abstract acts as a standalone summary, often read independently of the full paper. The introduction, however, is the beginning of the paper itself, leading the reader into the main text.

By clearly understanding these differences, you can ensure that both your abstract and introduction are effectively tailored to their respective purposes, providing a clear and engaging entry point into your research.

Structuring Your Abstract for Maximum Impact

The abstract is your research paper’s frontman – it’s the first thing people read, and it can make or break their interest in the rest of your work. So, how do you structure it to make sure it hits all the right notes? Here are some key elements to include for an impactful abstract:

• Background : Set the stage. Provide a brief context for your research. Why did you start this study? What gap in knowledge are you trying to fill?
• Objective : What was the aim of your research? This part should be crystal clear – readers want to know what you were trying to achieve.
• Methodology : Give a quick overview of how you conducted your research. Did you do experiments, surveys, or analysis? Keep it brief but informative.
• Results : What did you find? This is often what readers are most interested in. Highlight your key findings without getting bogged down in details.
• Conclusions : What do your results mean? Summarize the implications of your findings and their importance to the field.
• Keywords : Don’t forget to include keywords that will help others find your paper in searches.

Remember, while your abstract needs to be concise, it also needs to be complete. Readers should get a full picture of your research – from the why to the so what – in a nutshell.

Setting the Stage: Elements of a Strong Introduction

The introduction is more than just a starting point of your paper – it’s where you draw your readers in and build the framework for your research story. A well-crafted introduction should include several key elements:

• Hook : Start with something intriguing – a startling statistic, a compelling question, or an interesting anecdote. Your goal is to grab the reader’s attention and pique their curiosity.
• Background Information : Provide enough context to understand the research. What is the broader field of study? What are the key concepts or theories?
• Research Gap : Highlight the current knowledge gap that your research aims to fill. Why is this gap significant? What hasn’t been explored or solved yet?
• Research Question or Hypothesis : Clearly state the research question or hypothesis you’re investigating. This gives the reader a clear idea of what you’re aiming to uncover or prove.
• Objective and Scope : Define the objective of your research and its scope. What are you aiming to achieve and within what bounds?
• Significance : Explain why your research is important. What value does it add to the field? Why should the reader care?
• Outline of the Paper : Briefly outline how your paper is structured. What can the reader expect in the subsequent sections?

Remember, your introduction is your chance to set the tone for your entire paper. It should be engaging, informative, and clearly lay out what the reader can expect.

Abstract Writing Do’s and Don’ts

Crafting the perfect abstract for your research paper can be a bit of a tightrope walk. You want to include enough information to be informative but not so much that it becomes overwhelming. Here are some key do’s and don’ts to keep in mind:

Do’s:

• Be Clear and Concise : Use simple language and get straight to the point. An abstract is a summary, not a detailed explanation.
• Follow the Structure : Stick to the classic structure – background, objective, methods, results, and conclusion.
• Include Key Findings : Make sure your main results and their significance are clearly stated.
• Use Keywords : Include keywords relevant to your topic to make your paper searchable.
• Reflect Your Paper : Ensure your abstract accurately represents what is in your paper. No false advertising!

Don’ts:

• Avoid Over-Complexity : Don’t use jargon or overly complex language. Keep it accessible.
• Don’t Exceed Word Limits : Abstracts are typically 250 words or less. Stick to the limit.
• Avoid Adding New Information : Only include information that is present in the paper.
• Don’t Get Too Detailed : Leave the in-depth explanations and discussions for the main body of your paper.
• Don’t Forget to Proofread : Typos and grammatical errors can undermine the credibility of your work.

By following these guidelines, you can create an abstract that effectively summarizes your research and encourages readers to delve deeper into your paper.

Introduction: Laying the Foundation for Your Research Paper

The introduction of your research paper is where you lay the groundwork and build the framework for your entire study. It’s not just about starting your paper; it’s about setting the tone, providing context, and preparing the reader for what’s to come. Here’s how to make your introduction a solid foundation:

• Start with a Clear, Engaging Hook : Your opening sentences should capture the reader’s interest. Whether it’s a surprising fact, a pertinent question, or an interesting anecdote, your hook should be relevant and thought-provoking.
• Provide Background Information : Before diving into your research, give your readers a backdrop. What is the broader context of your study? How does it fit into the existing body of knowledge?
• Identify the Research Gap : What’s missing in the current literature or field of study? Clearly articulate the gap your research intends to fill. This not only shows the relevance of your work but also positions it within the larger conversation.
• State Your Research Question or Hypothesis : Clearly and concisely present the question your research seeks to answer or the hypothesis you intend to test. This is the guiding star of your entire paper.

Objectives and Significance

• Outline Your Research’s Objectives : What are you aiming to achieve with your study? Be clear about your objectives, as they will direct your methodology and analysis.
• Highlight the Significance of Your Study : Why is your research important? Whether it’s a practical application or a contribution to academic knowledge, make sure your readers understand the value of your work.
• Preview the Structure of the Paper : Give a brief overview of what each section of your paper will cover. This roadmap helps readers navigate your research journey.

By carefully crafting your introduction, you’re not just starting your paper; you’re inviting your readers on an intellectual journey. A well-structured introduction sets the stage for a compelling and insightful research paper.

Tips for Synthesizing Information in Your Abstract

Creating an abstract that succinctly synthesizes the essence of your research paper is a skill. It’s about distilling complex ideas and extensive research into a digestible, brief summary. Here are some tips to help you do just that:

• Focus on Key Elements : Remember, your abstract should include the core aspects of your research – background, objective, methods, results, and conclusions. Stick to these elements and avoid extraneous details.
• Be Selective with Your Information : Choose the most significant findings and the primary objectives of your research to include in your abstract. You don’t need to mention every minor detail or secondary result.
• Use Active Voice and Strong Verbs : Active voice makes your writing more direct and dynamic. Strong verbs help you convey a lot of information in fewer words.
• Write for Accessibility : Your abstract should be understandable even to those outside your specific field of study. Avoid jargon and technical terms that might not be familiar to all readers.
• Make Every Word Count : With a limited word count, every word in your abstract needs to serve a purpose. Be concise and clear, and avoid unnecessary adjectives and adverbs.
• Ensure Coherence and Flow : Your abstract should read smoothly. Use transitional phrases where necessary and ensure that your sentences flow logically from one to the next.
• Reflect the Paper Accurately : The abstract should be a true reflection of what’s in your paper. Avoid including information in the abstract that isn’t present in the main text.
• Revise and Edit : Don’t underestimate the power of revision. Read over your abstract multiple times, refine it, and make sure it clearly and effectively summarizes your research paper.

By following these tips, you can craft an abstract that serves as a compelling and accurate snapshot of your research, enticing readers to delve into the full details of your paper.

Hooking Your Reader: Introduction Strategies

The introduction of your research paper is more than just a formal start; it’s your first chance to engage and captivate your audience. To make sure you grab and hold your reader’s attention, consider these strategies:

• Start with a Compelling Hook : Open with a surprising fact, a thought-provoking question, or a brief story related to your research. This can pique the reader’s interest and draw them into the subject matter.
• Use Relevant Quotes or Anecdotes : A well-chosen quote or a brief anecdote that illustrates your research topic can be very effective. It adds a human element and can make complex topics more relatable.
• Pose a Provocative Question : Asking a question can be a powerful way to start. It engages the reader by prompting them to think about the answer and anticipate what your research might reveal.
• Present a Startling Statistic : Starting with a statistic that highlights the significance of your research topic can be a strong opener. It immediately shows the relevance and importance of your study.
• Create a Vivid Image : Use descriptive language to create a vivid picture in the reader’s mind. This can be particularly effective for topics related to natural sciences, social studies, or humanities.
• Challenge Common Assumptions : If your research challenges commonly held beliefs or existing theories, stating this upfront can be a compelling start. It sets the stage for presenting your new insights or findings.
• Bridge the Gap Between Known and Unknown : Start by summarizing what is already known about your topic, then transition into what your research will add to this knowledge. This highlights the contribution of your work.
• Keep It Brief and Engaging : Remember, the introduction should be concise and to the point. While being engaging, it should not stray into unnecessary details or background information.

By employing these strategies, you can create an introduction that not only informs but also excites and intrigues your readers, encouraging them to continue reading your paper with keen interest.

Common Mistakes to Avoid in Abstract and Introduction

Writing the abstract and introduction for your research paper can be a bit tricky. It’s easy to fall into some common traps. Being aware of these can help you create more compelling and effective sections. Here are some mistakes to watch out for:

In the Abstract:

• Being Too Vague : Your abstract should be clear and specific, providing a concise overview of your research. Avoid being too broad or general.
• Including Too Much Detail : Remember, the abstract is a summary. Avoid the temptation to include every detail of your study. Stick to the main points.
• Using Technical Jargon : While your paper might be aimed at a specialized audience, the abstract should be accessible to a broader readership. Minimize technical language.
• Forgetting Key Components : Ensure that your abstract covers all the essential elements – background, objective, methods, results, and conclusion.
• Writing the Abstract First : It’s often easier to write an effective abstract after you have completed the main body of the paper.

In the Introduction:

• Starting Too Slowly : You need to grab your reader’s attention right away. Avoid long-winded and overly general openings.
• Lacking a Clear Thesis Statement : Your introduction should clearly state the purpose and main argument of your paper. Don’t leave readers guessing.
• Overloading with Background Information : While some context is necessary, too much can overwhelm the reader. Stick to information that’s directly relevant to your research.
• Repeating the Abstract : The introduction should not be a repeat of the abstract. It should provide new, more detailed context and setup for your paper.
• Neglecting the Research Gap : Make sure to clearly articulate the gap in the existing research that your paper addresses. This highlights the importance of your study.

By avoiding these common mistakes, you can ensure that your abstract and introduction effectively set the stage for your research paper, engaging your audience from the very beginning.

Perfecting Your Research Paper: Bringing It All Together

Writing a research paper is like putting together a complex puzzle. Each piece must fit perfectly to present a clear, comprehensive picture of your research and findings. Here’s how you can bring it all together:

• Ensure Consistency Across Sections : Your paper should flow logically from the abstract and introduction through to the body and conclusion. Each section should seamlessly lead to the next, maintaining a consistent tone and style.
• Revisit Your Thesis or Hypothesis Regularly : Throughout your paper, continuously refer back to your thesis or hypothesis to ensure that your arguments and findings stay aligned with your initial premise.
• Integrate Your Results with the Discussion : Your results shouldn’t just be a list of data points. Integrate them with your discussion, interpreting what they mean in the context of your research question.
• Tie Back to the Introduction : In your conclusion, refer back to the points you raised in your introduction. This creates a full circle, reinforcing the relevance and impact of your research.
• Highlight the Significance and Implications : Clearly articulate the significance of your findings. How do they contribute to the field? What are the broader implications? This is your chance to showcase the importance of your work.
• Identify Limitations and Future Research Directions : No study is without limitations. Acknowledging these not only adds credibility to your work but also provides a launchpad for future research.
• End with a Strong Conclusion : Your conclusion is your final word. Make it count by summarizing your key findings and their implications in a compelling way.
• Proofread and Revise : The final step in perfecting your paper is thorough proofreading and revision. Ensure clarity, coherence, and correctness in every part of your paper.

By paying attention to these aspects, you can create a research paper that is well-structured, coherent, and impactful, effectively communicating the value and significance of your work.

Why Choose San Francisco Edit for Your Research Paper Editing Needs?

When it comes to preparing your research paper for publication in the competitive world of science, medicine, and academia, the importance of clarity, precision, and adherence to journal standards cannot be overstated. This is where “ San Francisco Edit ” steps in as your trusted partner.

Expertise in Scientific Manuscripts : With a focus on editing scientific manuscripts for peer-reviewed journals, we bring a wealth of knowledge and experience to the table. Our editors are not just language experts; they understand the nuances and intricacies of scientific writing.

Tailored to Your Field : Whether it’s in science, medicine, or academia, we tailor our editing services to suit the specific requirements of your field, ensuring that your paper not only reads well but also aligns with the conventions of your discipline.

Attention to Detail : From the abstract to the conclusion, we meticulously review every aspect of your paper. Our goal is to enhance readability, coherence, and impact, making sure that your research is presented in the best possible light.

Meeting Journal Standards : We understand the importance of adhering to journal guidelines. Our editors are skilled in formatting and styling your manuscript to meet the specific requirements of your target journal.

Timely and Reliable Service : We know how critical timelines are in academic publishing. Our team is committed to delivering high-quality editing services within your deadlines, helping you stay on track for your publication goals.

At “San Francisco Edit”, we’re not just editors – we’re partners in your academic journey. Our commitment to excellence, combined with our specialized expertise, makes us the ideal choice for editing your scientific manuscripts.

Contact San Francisco Edit today to give your research paper the professional edge it deserves!

FAQ’s

What services does san francisco edit provide.

San Francisco Edit specializes in editing scientific manuscripts for peer-reviewed journals, focusing on science, medicine, and academia.

Why is editing important for research papers?

Editing ensures clarity, precision, and adherence to journal standards, which are crucial for successful publication in scientific journals.

How does San Francisco Edit tailor its services to specific fields?

Our editing services are customized to meet the conventions and requirements of different scientific disciplines, ensuring relevance and accuracy.

Can San Francisco Edit help with meeting journal formatting requirements?

Absolutely! We are skilled in aligning manuscripts with the specific formatting and styling guidelines of target journals.

What sets San Francisco Edit apart in editing scientific manuscripts?

Our expertise in scientific fields, attention to detail, and commitment to timelines set us apart, ensuring high-quality and reliable editing services.

How can I get in touch with San Francisco Edit for my editing needs?

You can contact San Francisco Edit through our website for professional editing services tailored to your research paper’s needs.

Sign Up For Our Newsletter

Latest from the blog.

Thesis versus Dissertation: Strategies for Effective Writing and Research

Tips for Writing an Engaging Scientific Introduction: Building a Solid Foundation for Your Paper

Writing Abstracts for Publication: Structuring Your Summary for Success

Writing Scientific Posters: Crafting a Winning Poster Session

• Knowledge Center
• English Grammar
• Getting Published
• Journal Submission
• Marketing Your Paper and Yourself
• Peer Reviewing a Scientific Paper
• Presenting Your Research
• Thesis vs Dissertation
• What is Scientific Editing
• Why Edit and Types of Editing
• Writing the Manuscript
• Scientific Editing
• Business Editing
• Language Editing
• Newsletters
• Testimonials
• Areas of Expertise

San Francisco Edit 1755 Jackson Street Suite 610 San Francisco, CA 94109 Email: [email protected]

Copyright © 2003-2022 San Francisco Edit. All Rights Reserved.

Join 90,000+ Scientist Who Get Useful Tips For Writing Better Manuscripts

Don't miss out on future newsletters. sign up now..

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

Writing an Abstract and Introduction

The goal of an engineering abstract is to efficiently and concisely express the purpose and results of your paper. Readers look at the abstract because they are in search of answers, and the abstract allows them to know if your paper is of use to them or not. If the research problem is presented but not the results that address the problem, the reader will not read the article and will search elsewhere. By including the overall results in the abstract, the reader gets a feel for the article and if it is worth reading.

Abstract follows a structure of introductory sentence, a methods sentence, 2-3 sentences of key data points and a conclusion sentence on the overall result. First, there should be an introductory sentence on the research that is needed in a specific area or a problem that needs to be examined. It should introduce the study; that is, the plan to address the problem. Next, the abstract should also include a sentence on data such as tests, samplings, survey results, etc. Following the method of study, a two to three sentence discussion that includes key data points of the study would be helpful to the reader. The abstract should not include mathematics or citations (remember–it is a summary, not a detailed explanation). The conclusion of the abstract should share the overall results from the study. An abstract should stand on its own, i.e. the reader should be able to understand the content of the paper just from reading the abstract.

For an example of how to write an abstract, see the sample document below (Fig. 3.1). Notice the length and placement of the abstract. Also notice that at the end of the abstract are a list of keywords that would be used in a search engine to find the article.

Introduction

The introduction could be very lengthy or quite short depending on how long and involved the research is. At times, an introduction could include an abbreviated literature review or history of the project. If the research is a part of a bigger endeavor, the entire study could be briefly discussed and referenced.

Technical Writing @ SLCC Copyright © 2020 by Department of English, Linguistics, and Writing Studies at SLCC is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License , except where otherwise noted.

Share This Book

• How to Write An Abstract For Research Papers: Tips & Examples

In many ways, an abstract is like a trailer of a movie or the synopsis of your favorite book. Its job is to whet the reader’s appetite by sharing important information about your work. After reading a well-written abstract, one should have enough interest to explore the full research thesis. 

So how do you write an interesting abstract that captures the core of your study? First, you need to understand your research objectives and match them with the key results of your study. In this article, we will share some tips for writing an effective abstract, plus samples you can learn from. 

What is an Abstract in Research Writing?

In simple terms, an abstract is a concise write-up that gives an overview of your systematic investigation. According to Grammarly, it is a self-contained summary of a larger work, and it serves as a preview of the bigger document. 

It usually appears at the beginning of your thesis or research paper and helps the reader to have an overview of your work without going into great detail. This means that when someone reads your abstract, it should give them a clear idea of the purpose of your systematic investigation, your problem statement, key results, and any gaps requiring further investigation. 

So how long should your abstract be to capture all of these details? The reality is you don’t need a lot of words to capture key pieces of information in your abstract. Typically, 6–7 sentences made up of 150–250 words should be just right. 

Read: Writing Research Proposals: Tips, Examples & Mistakes

What are the Characteristics of a Good Abstract? 

• A good abstract clearly states the aims and objectives of the research.
• It outlines the research methodology for data gathering , processing and analysis. 
• A good abstract summarizes specific research results.
• It states the key conclusions of the systematic investigation.
• It is brief yet straight to the point. 
• A good abstract is unified and coherent. 
• It is easy to understand and devoid of technical jargon. 
• It is written in an unbiased and objective manner. 

What is the Purpose of an Abstract? 

Every abstract has two major purposes. First, it communicates the relevance of your systematic investigation to readers. After reading your abstract, people can determine how relevant your study is to their primary or secondary research purpose. 

The second purpose of an abstract is to communicate your key findings to those who don’t have time to read the whole paper. Research papers typically run into tens of pages so it takes time to read and digest them. To help readers grasp the core ideas in a systematic investigation, it pays to have a well-written abstract that outlines important information concerning your study. 

In all, your abstract should accurately outline the most important information in your research. Many times, it determines whether people would go ahead to read your dissertation. Abstracts are often indexed along with keywords on academic databases, so they make your thesis easily findable.

Learn About: How to Write a Problem Statement for your Research

What are the Sections of an Abstract?

You already know the key pieces of information that your abstract should communicate. These details are broken into six important sections of the abstract which are: 

• The Introduction or Background
• Research Methodology
• Aims and Objectives 
• Limitations

Let’s discuss them in detail. 

• The Introduction or Background 

The introduction or background is the shortest part of your abstract and usually consists of 2–3 sentences. In fact, some researchers write a single sentence as the introduction of their abstract. The whole idea here is to take the reader through the important events leading to your research. 

Understandably, this information may appear difficult to convey in a few sentences. To help out, consider answering these two questions in the background to your study : 

• What is already known about the subject, related to the paper in question? 
• What is not known about the subject (this is the focus of your study)? 

As much as possible, ensure that your abstract’s introduction doesn’t eat into the word count for the other key information. 

• Research Methodology 

This is the section where you spell out any theories and methods adopted for your study. Ideally, you should cover what has been done and how you went about it to achieve the results of your systematic investigation. It is usually the second-longest section in the abstract. 

In the research methodology section, you should also state the type of research you embarked on; that is, qualitative research or quantitative research —this will inform your research methods too. If you’ve conducted quantitative research, your abstract should contain information like the sample size, data collection methods , sampling technique, and duration of your experiment. 

Explore: 21 Chrome Extensions for Academic Researchers in 2021

In the end, readers are most interested in the results you’ve achieved with your study. This means you should take time to outline every relevant outcome and show how they affect your research population . Typically, the results section should be the longest one in your abstract and nothing should compromise its range and quality. 

An important thing you should do here is spelled out facts and figures about research outcomes. Instead of a vague statement like, “we noticed that response rates differed greatly between high-income and low-income respondents”, try this: “The response rate was higher in high-income respondents than in their low-income counterparts (59% vs 30%, respectively; P

• Conclusion 

Like the introduction, your conclusion should contain a few sentences that wrap up your abstract. Most researchers express a theoretical opinion about the implications of their study, here. 

Your conclusion should contain three important elements: 

• The primary take-home message
• The additional findings of importance
• The perspective 

Although the conclusion of your abstract should be short, it has a great impact on how readers perceive your study. So, take advantage of this section to reiterate the core message in your systematic investigation. Also, make sure any statements here reflect the true outcomes and methods of your research. 

• Limitations 

Chances are you must have faced certain challenges in the course of your research—it could be at the data collection phase or during sampling . Whatever these challenges are, it pays to let your readers know about them, and the impact they had on your study. 

For example, if you had to switch to convenience sampling or snowball sampling due to difficulties in contacting well-suited research participants, you should include this in your abstract. Also, a lack of previous studies in the research area could pose a limitation on your study. Research limitations provide an opportunity to make suggestions for further research. 

Research aims and objectives speak to what you want to achieve with your study. Typically, research aims focus on a project’s long-term outcomes while the objectives focus on the immediate, short-term outcome of the investigation. You may summarize both using a single paragraph comprising a few sentences.

Stating your aims and objectives will give readers a clear idea of the scope, depth, and direction that your research will ultimately take. Readers would measure your research outcomes against stated aims and objectives to know if you achieved the purpose of your study. 

Use For Free: Research Form Templates

Abstract Writing Styles and General Guidelines 

Now that you know the different sections plus information that your abstract should contain, let’s look at how to write an abstract for your research paper.

A common question that comes up is, should I write my abstract first or last? It’s best to write your abstract after you’ve finished working on the research because you have full information to present to your readers. However, you can always create a draft at the beginning of your systematic investigation and fill in the gaps later.  

Does writing an abstract seem like a herculean task? Here are a few tips to help out. 

1. Always create a framework for your abstract 

Before you start writing, take time to develop a detailed outline for your abstract. Break it into sections and sketch the main and supporting points for each section. You can list keywords plus 1–2 sentences that capture your core messaging. 

2. Read Other Abstracts 

Abstracts are one of the most common research documents, and thousands of them have been written in time past. So, before writing yours, try to study a couple of samples from others. You can find lots of dissertation abstract examples in thesis and dissertation databases.

3. Steer Clear of Jargon As Much As Possible 

While writing your abstract, emphasize clarity over style. This means you should communicate in simple terms and avoid unnecessary filler words and ambiguous sentences. Remember, your abstract should be understandable to readers who are not familiar with your topic. 

4. Focus on Your Research

It goes without saying that your abstract should be solely focused on your research and what you’ve discovered. It’s not the time to cite primary and secondary data sources unless this is absolutely necessary. 

This doesn’t mean you should ignore the scholarly background of your work. You might include a sentence or two summarizing the scholarly background to show the relevance of your work to a broader debate, but there’s no need to mention specific publications. 

Going further, here are some abstract writing guidelines from the University of Bergen: 

• An abstract briefly explains the salient aspects of the content. 
• Abstracts should be accurate and succinct, self-contained, and readable.  
• The abstract should paraphrase and summarise rather than quote from the paper.
• Abstracts should relate only to the paper to be presented/assessed.

Types of Abstracts with Examples 

According to the University of Adelaide, there are two major types of abstracts written for research purposes. First, we have informative abstracts and descriptive abstracts. 

1. Informative Abstract  

An informative abstract is the more common type of abstract written for academic research. It highlights the most important aspects of your systematic investigation without going into unnecessary or irrelevant details that the reader might not find useful. 

The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of longer work, it may be much less.

In any informative abstract, you’d touch on information like the purpose, method, scope, results, and conclusion of your study. By now, you’re thinking, “this is the type of abstract we’ve been discussing all along”, and you wouldn’t be far from the truth. 

Advantages of Informative Abstracts

• These abstracts save time for both the researcher and the readers. 
• It’s easy to refer to these abstracts as secondary research sources. 

Disadvantages of Informative Abstracts

• These types of abstracts lack personality.

Example of an Informative Abstract

• Sample Informative Abstract Based on Experimental Work From Colorado State University
• Sample Informative Abstract Based on Non-experimental Work From Colorado State University

2. Descriptive Abstract 

A descriptive abstract reads like a synopsis and focuses on enticing the reader with interesting information. They don’t care as much for data and details, and instead read more like overviews that don’t give too much away. 

You’d find descriptive abstracts in artistic criticism pieces and entertainment research as opposed to scientific investigations. This type of abstract makes no judgments about the work, nor does it provide results or conclusions of the research. They are usually written in 100 words or less. 

Advantages of Descriptive Abstracts

• It gives a very brief overview of the research paper. 
• It is easier to write descriptive abstracts compared to informational abstracts. 

Disadvantages of Descriptive Abstracts

• They are suitable for scientific research. 
• Descriptive abstracts might omit relevant information that deepens your knowledge of the systematic investigation.

Example of Descriptive Abstracts 

• Sample Descriptive Abstract From Colorado State University

FAQs About Writing Abstracts in Research Papers

1. How Long Should an Abstract Be?

A typical abstract should be about six sentences long or less than 150 words. Most universities have specific word count requirements that fall within 150–300 words. 

2. How Do You Start an Abstract Sentence?

There are several ways to start your abstract. Consider the following methods: 

• State a problem or uncertainty
• Make a general statement with the present research action.
• State the purpose or objective of your research
• State a real-world phenomena or a standard practice.

3. Should you cite in an abstract?

While you can refer to information from specific research papers, there’s no need to cite sources in your abstract. Your abstract should focus on your original research, not on the work of others. 

4. What should not be included in an abstract?

An abstract shouldn’t have numeric references, bibliographies, sections, or even footnotes. 

5. Which tense is used in writing an abstract?

An abstract should be written in the third-person present tense. Use the simple past tense when describing your methodology and specific findings from your study. 

Writing an abstract might appear challenging but with these steps, you should get it right. The easiest approach to writing a good abstract is centering it on key information including your research problem and objectives, methodology, and key results.

Connect to Formplus, Get Started Now - It's Free!

• abstract in research papers
• abstract writing
• descriptive abstract
• good abstract
• purpose of abstract
• qualitative research
• quantitative research
• research methodology
• busayo.longe

You may also like:

How to Write a Problem Statement for your Research

Learn how to write problem statements before commencing any research effort. Learn about its structure and explore examples

15 Reasons to Choose Quantitative over Qualitative Research

This guide tells you everything you need to know about qualitative and quantitative research, it differences,types, when to use it, how...

Extrapolation in Statistical Research: Definition, Examples, Types, Applications

In this article we’ll look at the different types and characteristics of extrapolation, plus how it contrasts to interpolation.

Research Questions: Definitions, Types + [Examples]

A comprehensive guide on the definition of research questions, types, importance, good and bad research question examples

Formplus - For Seamless Data Collection

Collect data the right way with a versatile data collection tool. try formplus and transform your work productivity today..

Thesis Helpers

Find the best tips and advice to improve your writing. Or, have a top expert write your paper.

Abstract Vs Introduction: Key Similarities and Differences

Is an abstract the same as an introduction? This is one of the questions we receive most frequently, so we thought it would be a good idea to write an article about the abstract vs introduction problem. Most students don’t know how to differentiate between the two, especially if they are new to academic writing. Even though the two things are somewhat similar, there is at least one major difference between introduction and abstract. In this article, we will discuss the similarities and differences between the two. What is the difference between an abstract and an introduction? Let’s find out!

The Abstract Vs Introduction Problem

Introduction vs abstract: which one does what? Because many professors don’t explain these two terms to their students, it’s easy to confuse them. We consider that this is not the students’ fault. If they don’t know the difference between an abstract and an introduction, it’s easy to make a grave mistake. Of course, you will get penalized harshly for this. This blog post aims to provide information about abstract vs introduction scientific paper writers need to make sure they don’t get an F on their next essay.

Abstract and Introduction: What Are They?

So, let’s discuss abstract vs introduction APA style. An abstract is basically a summary of a complex paper (such as a thesis or a research paper).

The abstract summarizes all the different parts of the paper, including the research problem, the objectives, the methods, the results, and the conclusion. After reading the abstract, the reader should know exactly what the paper is about and how it is structured. The length of an abstract is around 250-300 words. The introduction, on the other hand, is there to give your readers an idea of what you are about to talk about and introduce your thesis statement.

It can contain a bit of background information, but it does not delve into the specifics of your research methods or results. Also, the introduction does not discuss the conclusion of the paper in any way.

The Key Difference Between Abstract and Introduction

OK, but what is the major difference between abstract and introduction? In simple terms, the abstract is a summary of the entire research paper. It briefly discusses the methods, results and conclusion. The introduction, on the other hand, is there to entice the reader to read the entire paper. It discusses just the background of the problem and the objectives of the paper. You will never see the conclusion being discussed in an introduction.

Is an APA abstract vs introduction different from MLA or other types of academic writing? No, the abstract and the introduction are just as different regardless of the academic writing style. You should never confuse one for the other because the consequences can be a rejected paper or at the very least a very low grade.

Introduction vs Abstract: The Similarities

Now that you know the main difference between an abstract and introduction, it’s time to talk about similarities. This should help you avoid any confusion:

• Both the introduction and the abstract are placed at the beginning of a research paper. In fact, an abstract can be considered a de-facto introduction.
• Both the abstract and the introduction are there to provide some information about the subject and about the objectives of your research paper.
• Both can be used as a way to attract the interest of a reader.

However, this is where the similarities end. Never assume that you can write an introduction in place of an abstract. Of course, you can’t write an abstract in place of an introduction either. This is the information about abstract vs introduction lab report writers need to know before they start writing their first paper. We know that sometimes writing an abstract can be more difficult than the introduction to abstract algebra in high school. However, with practice, you will quickly get the hang of it.

Abstract and Introduction Examples

To help you understand the meaning and role of an abstract better, we have written an example abstract for you and broken it down into pieces:

As of 2023, residual herbicide that is accumulating in certain crops is posing a growing threat to the rice-wheat rotation in northern India. (The background part) When it comes to pesticides and pesticide metabolites, green manure has been shown to stimulate ample co-mineralization. By incorporating it into the soil, the effects of the herbicide residue can be mitigated. (The objectives part) During a three-year study at the North Indian Wheat Research Institute, Azolla Pinata and A. Carolingiana have been used as green manure. The effects of the green manure on the Propanil and Buthachlor herbicides has been evaluated, as well as the mineralization and co-metabolization of the herbicides, using a process known as liquid chromatography. (The material and methods part) Initial results indicate that Azolla Pinata caused the Propanil herbicide to co-mineralize in 14 days. However, the green manure did not have the intended effect on the Buthachlor herbicide during the study. (The findings part) After analyzing the findings of the study, we can say for certain that Azolla Pinata used as green manure can prevent residual Propanil accumulation. (The conclusion part)

An example introduction for the paper would look something like this:

Residual herbicides are posing a growing threat to the systems of rice-wheat rotation in Northern India. According to a recent study by the North Indian Wheat Research Institute, Azolla Pinata is able to co-mineralize some herbicides. Understanding the process by which this happens is important for the future of Indian rice and wheat crops. This research paper aims to answer the following question: how does green manure co-mineralize certain herbicides? We will first analyze the soil and the herbicide accumulation, then we will discuss the effects of green manure, and finally we will analyze the potential applications.

Need Assistance?

Abstract versus introduction: I still don’t understand the difference! No problem, you are certainly not the only one. Many students are emailing us to get more information about these two important parts of their research papers. Instead of struggling to write something you don’t understand, why don’t you get some one on one help from our academic writing experts? In case you don’t know how to write the abstract or are struggling to write an excellent introduction for your paper, we can help you.

We can not only write you an abstract introduction, but also help you with the research and analysis part of your paper. It goes without saying that our writers and editors can also write your paper from scratch from start to finish. You will get an awesome essay that will thrill your professor. Getting a top grade is now easier than ever with our help.

We know that you are probably reluctant to get help from an online academic writing service. However, we can assure you that our experts will do a great job. All our papers are 100% original, written from scratch. We do not sell pre-written papers, period. And remember, getting quality assistance with your introduction and abstract is just one message away. What are you waiting for?

Make PhD experience your own

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

How To Write an Abstract for Any Subject and Publication (With Examples)

Table of contents

Christian Rigg

An abstract is a short summary of a longer work, such as a study or research paper. The goal is to provide readers with an overview of the purpose, methodology, results, conclusion, and importance of this text.

As a writing coach and part-time academic editor and translator, I’ve read hundreds of abstracts and helped authors draft and refine dozens more. I’ve found that, when writing an abstract, the greatest difficulty lies in balancing brevity, detail, and accessibility.

Fortunately, there’s a simple formula you can use to write a solid abstract for publication, regardless of the subject. What’s more, you can leverage AI to help you write a clear, concise abstract — without losing your voice or sounding unprofessional.

Below you’ll find step-by-step instructions, best practices, examples, and a helpful checklist. 

Key Takeaways

• An abstract offers a succinct overview of the aims, results, and importance of your research.
• Check submission guidelines, write clearly and concisely, and use language to “guide” readers through your abstract. 
• The IMRaD (Introduction, Methodology, Results, and Discussion) approach is simple and effective. 
• More and more authors are using AI to do the heavy lifting. With the right prompts, AI can save you time and create a cohesive abstract.

Writing an abstract: First steps and best practices

Keep the following in mind as you write your abstract:

• If you’re submitting to a publication , check for specific guidelines regarding overall length, format, keywords, and the presence or absence of section headings (e.g. “Purpose”). Follow these guidelines exactly.
• Write concisely and clearly . If you struggle to write concisely, consider using an AI-writing assistant like Wordtune . Simply select text to receive suggestions on how to write a sentence or paragraph more concisely without losing any value.
• Make your abstract self-contained . Don’t refer to passages in your article or research. If you must include terms that your audience may not be familiar with, such as highly technical jargon or concepts borrowed from another field, offer a brief definition.
• Use connecting phrases like “for this reason,” “as a result,” and “this led us” to “guide” the reader through your abstract and help them see the connections between your research goal, methodology, results, and conclusions. ‍
• Read abstracts on similar studies . This gives you a good benchmark and can help you get started. If you’re submitting your abstract to a particular publication, it also gives you a good idea of the type of language and structure they prefer.

Get Wordtune for free > Get Wordtune for free >

How to write an abstract: The IMRaD Structure

IMRaD stands for Introduction, Methodology, Results, and Discussion (or Conclusion). 

It’s the most common way to structure a research paper and a very simple way to approach your abstract. In some cases, authors even include these section headings in their abstracts. 

Step One: Introduction

Length : About 25% of your abstract

Purpose : Provide context for your research and describe your research objectives. 

Start by introducing your topic. There are two main parts to this:

• Your research question stated simply and straightforwardly (what missing knowledge does your study aim to answer?). You can use words like “investigate,” “review,” “test,” “analyze,” “study,” and “evaluate” to make it clear how your work relates to the context.
• A brief overview of the academic, historical, social, or scientific context. This helps the reader understand the importance and relevance of your work. In many cases, starting with context before your research question makes more sense, so feel free to write in that order. 

Regarding context, consider the following: 

For example:

Psychologists and neuroscientists have long studied the role of sleep in the formation of new memories. Previous research into how sleep affects memory has often struggled because it’s difficult to measure the quality, stages, and overall impact of sleep accurately. As a result, there’s ongoing debate in the scientific community , and recent research suggests sleep may not be as important as researchers once thought. In this study, we review the evidence and offer a novel conclusion : the same mechanisms thought to mediate sleep-related memory formation also operate during waking hours, particularly quiet wakefulness.  In this example, several contextual cues are offered: it’s a long-standing topic in the literature; previous research is limited due to a specific issue , and there is active scientific debate . The section closes with the research aims: to review the evidence and offer a new conclusion. 

Step Two: Methodology

Purpose : Clearly describe what you did and highlight novelty. 

In this section, provide a clear description of your research methodology. While it’s important to be concise, make sure you’re not being vague. Mention specific frameworks and tools. 

‍ To explore the impact of social media on political engagement, we conducted a study with 200 participants, divided into two groups. The first was exposed to curated political content on social media, while the control group received a neutral feed. Our mixed-method approach combined quantitative engagement metrics analysis and qualitative interviews to assess changes in political participation.

There’s no need to provide an in-depth justification of your approach, although if it’s a novel one, it’s worth highlighting this and explaining what makes it appropriate. For example, " We chose this approach because it offers a clearer image of the structure of proteins involved in the transfer of electrons during cellular respiration ."

Finally, you can omit methodological limitations; we’ll cover these later. 

Step Three: Results

Length : About 35% of your abstract

Purpose : Provide a clear, specific account of your results. 

This section is arguably the most important (and interesting) part of your abstract.

Explain the results of your analysis in a specific and detailed fashion. This isn’t the time to be vague or bury the lead. For example:

“Our survey indicates a marked shift in sedimentary rock composition. In three locations, we observed significant erosion, and mineralogical analysis revealed a high concentration of quartz. Further analysis suggests two major events in the past 200 years, correlating with disturbances in the region.”

"Our survey of the Redstone Canyon region identified a marked shift in sedimentary rock composition from predominantly sandstone to shale, particularly evident in the lower strata. Quantitative analysis showed a 40% increase in shale content compared to previous surveys. In three distinct locations, we observed significant erosion, with up to two meters of topsoil displacement, primarily due to water runoff. Mineralogical analysis revealed an unexpectedly high concentration of quartz (up to 22%) in these eroded areas. Additionally, our seismic retrogression analysis suggests two major seismic events in the past 200 years, correlating with the observed stratification disturbances."

Incidentally, you don’t need to include all of your findings here, only those that will help the reader to understand the next section: your discussion and conclusion (i.e., what the results mean). This will help you keep the results section concise and relevant. 

Step Four: Discussion/Conclusion

Length : About 15%

Purpose : Present what new knowledge you’ve found and why it matters.

Bearing in mind your research question, give a clear account of your conclusions. What new knowledge has been gained? 

The simplest way to do this is in the present tense: “We conclude that…”

You should also briefly explain why this matters. What are the implications of your findings? Be specific and avoid making claims that aren’t directly supported by your research. 

If there are any important limitations (such as population or control group size), you can mention them now. This helps readers assess the credibility and generalizability of your findings. 

You can use these samples for inspiration.

They are divided into introduction , methodology , results , and conclusion.

The rising urbanization rate poses challenges to mental health, an issue garnering increasing attention in recent years. This study aims to analyze the impact of urban green spaces on the mental health of city dwellers. The focus is on how access to parks and natural environments within urban settings contributes to psychological well-being . For this purpose, we employed a cross-sectional survey methodology, targeting residents in three major cities with varying levels of green space availability. We used a combination of GIS mapping to determine green space distribution and structured questionnaires to assess mental health indicators among 1,000 participants . Our results show a clear correlation between access to green spaces and improved mental health outcomes. Residents with frequent access to parks reported 30% lower stress levels and a 25% reduction in symptoms related to anxiety and depression, compared to those with limited access. Additionally, our analysis revealed that green spaces in dense urban areas had a more significant impact than those in less populated districts . We conclude that urban green spaces play a crucial role in enhancing mental health. This underscores the importance of urban planning policies that prioritize green space development as a public health strategy. These findings have significant implications for city planning and public health policy, advocating for the integration of green spaces in urban development to foster mental well-being .

The phenomenon of antibiotic resistance is a growing concern in medical science. This study investigates the effectiveness of novel synthetic peptides as potential antibiotics against multi-drug resistant bacteria. The research specifically examines the impact of these peptides on the cellular integrity and replication processes of resistant bacterial strains . Our methodology involved in vitro testing of three newly synthesized peptides against a panel of bacteria known for high resistance to conventional antibiotics. The bacterial strains included methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococci (VRE). We used a combination of microbiological assays and electron microscopy to evaluate the antibacterial activity and the cellular changes induced by the peptides . The results were promising, showing that two of the three peptides effectively inhibited the growth of MRSA and VRE at low concentrations. Electron microscopy revealed significant disruption of bacterial cell walls and membranes, leading to cell lysis. These peptides also demonstrated low toxicity in preliminary mammalian cell culture tests, suggesting a high therapeutic index . Our study provides promising evidence for the use of synthetic peptides in combating antibiotic-resistant bacteria. These findings open new avenues for developing effective treatments against infections caused by drug-resistant pathogens and highlight the potential of peptide-based therapies in future pharmaceutical applications .

The integration of artificial intelligence (AI) in education is a rapidly evolving area of study. This research explores the effectiveness of AI-driven personalized learning systems in enhancing student performance in high school mathematics. The study focuses on understanding how AI customization impacts learning outcomes compared to traditional teaching methods . We conducted a randomized controlled trial involving 500 high school students from five schools, divided into two groups. The experimental group used an AI-based learning platform that adapted to each student's learning pace and style, while the control group continued with standard classroom instruction. The study measured improvements in mathematical understanding and problem-solving skills over a six-month period . The results indicated a significant improvement in the AI group, with a 40% increase in test scores and a 35% rise in problem-solving abilities compared to the control group. Additionally, students using the AI system reported higher levels of engagement and satisfaction with the learning process . In conclusion, the use of AI-driven personalized learning systems shows considerable promise in enhancing educational outcomes in mathematics. This study suggests that AI personalization can be a valuable tool in modern educational strategies, potentially revolutionizing how subjects are taught and learned in schools .

What is the main objective of an abstract?

The goal of an abstract is to provide readers with a concise overview of the purpose, methodology, results, conclusion, and importance of a longer work, such as a research paper or study. 

How long should an abstract be?

Depending on the publication, an abstract should be anywhere from 150 to 250 words. 

What should an abstract include?

An abstract should include an introduction (context + research question), the methodology, the results, and a conclusion (what you found and why it matters).

IMRaD is a simple formula you can follow to write a great abstract for any topic and publication type. Simply follow the instructions above to write each section: Introduction, Methodology, Results, and Discussion/Conclusion.

Be careful to balance detail with brevity, as abstracts are meant to be a short overview of your study. If you struggle with writing concisely and clearly, consider using a writing aid like Wordtune to handle some of the heavy lifting. 

Want to learn more key writing tips? Check out these articles:

• How to Write Concisely and Effectively (+Examples)
• Transition Word Examples and How to Use Them Effectively
• How to Write a Research Paper (+Free AI Research Paper Writer)

Share This Article:

The Official Wordtune Guide

An Expert Guide to Writing Effective Compound Sentences (+ Examples)

A Step-by-Step Guide to Writing a Stellar Literature Review (with Help from AI)

Looking for fresh content, thank you your submission has been received.

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Write an Abstract for a Research Paper | Examples

What is a research paper abstract?

Research paper abstracts summarize your study quickly and succinctly to journal editors and researchers and prompt them to read further. But with the ubiquity of online publication databases, writing a compelling abstract is even more important today than it was in the days of bound paper manuscripts.

Abstracts exist to “sell”  your work, and they could thus be compared to the “executive summary” of a business resume: an official briefing on what is most important about your research. Or the “gist” of your research. With the majority of academic transactions being conducted online, this means that you have even less time to impress readers–and increased competition in terms of other abstracts out there to read.

The APCI (Academic Publishing and Conferences International) notes that there are  12 questions or “points” considered in the selection process  for journals and conferences and stresses the importance of having an abstract that ticks all of these boxes. Because it is often the ONLY chance you have to convince readers to keep reading, it is important that you spend time and energy crafting an abstract that faithfully represents the central parts of your study and captivates your audience.

With that in mind, follow these suggestions when structuring and writing your abstract, and learn how exactly to put these ideas into a solid abstract that will captivate your target readers.

Before Writing Your Abstract

How long should an abstract be.

All abstracts are written with the same essential objective: to give a summary of your study. But there are two basic styles of abstract: descriptive and informative . Here is a brief delineation of the two:

Of the two types of abstracts, informative abstracts are much more common, and they are widely used for submission to journals and conferences. Informative abstracts apply to lengthier and more technical research and are common in the sciences, engineering, and psychology, while descriptive abstracts are more likely used in humanities and social science papers. The best method of determining which abstract type you need to use is to follow the instructions for journal submissions and to read as many other published articles in those journals as possible.

Research Abstract Guidelines and Requirements

As any article about research writing will tell you, authors must always closely follow the specific guidelines and requirements indicated in the Guide for Authors section of their target journal’s website. The same kind of adherence to conventions should be applied to journal publications, for consideration at a conference, and even when completing a class assignment.

Each publisher has particular demands when it comes to formatting and structure. Here are some common questions addressed in the journal guidelines:

• Is there a maximum or minimum word/character length?
• What are the style and formatting requirements?
• What is the appropriate abstract type?
• Are there any specific content or organization rules that apply?

There are of course other rules to consider when composing a research paper abstract. But if you follow the stated rules the first time you submit your manuscript, you can avoid your work being thrown in the “circular file” right off the bat.

Identify Your Target Readership

The main purpose of your abstract is to lead researchers to the full text of your research paper. In scientific journals, abstracts let readers decide whether the research discussed is relevant to their own interests or study. Abstracts also help readers understand your main argument quickly. Consider these questions as you write your abstract:

• Are other academics in your field the main target of your study?
• Will your study perhaps be useful to members of the general public?
• Do your study results include the wider implications presented in the abstract?

Outlining and Writing Your Abstract

What to include in an abstract.

Just as your  research paper title  should cover as much ground as possible in a few short words, your abstract must cover  all  parts of your study in order to fully explain your paper and research. Because it must accomplish this task in the space of only a few hundred words, it is important not to include ambiguous references or phrases that will confuse the reader or mislead them about the content and objectives of your research. Follow these  dos  and  don’ts  when it comes to what kind of writing to include:

• Avoid acronyms or abbreviations since these will need to be explained in order to make sense to the reader, which takes up valuable abstract space. Instead, explain these terms in the Introduction section of the main text.
• Only use references to people or other works if they are well-known. Otherwise, avoid referencing anything outside of your study in the abstract.
• Never include tables, figures, sources, or long quotations in your abstract; you will have plenty of time to present and refer to these in the body of your paper.

Use keywords in your abstract to focus your topic

A vital search tool is the research paper keywords section, which lists the most relevant terms directly underneath the abstract. Think of these keywords as the “tubes” that readers will seek and enter—via queries on databases and search engines—to ultimately land at their destination, which is your paper. Your abstract keywords should thus be words that are commonly used in searches but should also be highly relevant to your work and found in the text of your abstract. Include 5 to 10 important words or short phrases central to your research in both the abstract and the keywords section.

For example, if you are writing a paper on the prevalence of obesity among lower classes that crosses international boundaries, you should include terms like “obesity,” “prevalence,” “international,” “lower classes,” and “cross-cultural.” These are terms that should net a wide array of people interested in your topic of study. Look at our nine rules for choosing keywords for your research paper if you need more input on this.

Research Paper Abstract Structure

As mentioned above, the abstract (especially the informative abstract) acts as a surrogate or synopsis of your research paper, doing almost as much work as the thousands of words that follow it in the body of the main text. In the hard sciences and most social sciences, the abstract includes the following sections and organizational schema.

Each section is quite compact—only a single sentence or two, although there is room for expansion if one element or statement is particularly interesting or compelling. As the abstract is almost always one long paragraph, the individual sections should naturally merge into one another to create a holistic effect. Use the following as a checklist to ensure that you have included all of the necessary content in your abstract.

1) Identify your purpose and motivation

So your research is about rabies in Brazilian squirrels. Why is this important? You should start your abstract by explaining why people should care about this study—why is it significant to your field and perhaps to the wider world? And what is the exact purpose of your study; what are you trying to achieve? Start by answering the following questions:

• What made you decide to do this study or project?
• Why is this study important to your field or to the lay reader?
• Why should someone read your entire article?

In summary, the first section of your abstract should include the importance of the research and its impact on related research fields or on the wider scientific domain.

2) Explain the research problem you are addressing

Stating the research problem that your study addresses is the corollary to why your specific study is important and necessary. For instance, even if the issue of “rabies in Brazilian squirrels” is important, what is the problem—the “missing piece of the puzzle”—that your study helps resolve?

You can combine the problem with the motivation section, but from a perspective of organization and clarity, it is best to separate the two. Here are some precise questions to address:

• What is your research trying to better understand or what problem is it trying to solve?
• What is the scope of your study—does it try to explain something general or specific?
• What is your central claim or argument?

3) Discuss your research approach

Your specific study approach is detailed in the Methods and Materials section .  You have already established the importance of the research, your motivation for studying this issue, and the specific problem your paper addresses. Now you need to discuss  how  you solved or made progress on this problem—how you conducted your research. If your study includes your own work or that of your team, describe that here. If in your paper you reviewed the work of others, explain this here. Did you use analytic models? A simulation? A double-blind study? A case study? You are basically showing the reader the internal engine of your research machine and how it functioned in the study. Be sure to:

• Detail your research—include methods/type of the study, your variables, and the extent of the work
• Briefly present evidence to support your claim
• Highlight your most important sources

4) Briefly summarize your results

Here you will give an overview of the outcome of your study. Avoid using too many vague qualitative terms (e.g, “very,” “small,” or “tremendous”) and try to use at least some quantitative terms (i.e., percentages, figures, numbers). Save your qualitative language for the conclusion statement. Answer questions like these:

• What did your study yield in concrete terms (e.g., trends, figures, correlation between phenomena)?
• How did your results compare to your hypothesis? Was the study successful?
• Where there any highly unexpected outcomes or were they all largely predicted?

5) State your conclusion

In the last section of your abstract, you will give a statement about the implications and  limitations of the study . Be sure to connect this statement closely to your results and not the area of study in general. Are the results of this study going to shake up the scientific world? Will they impact how people see “Brazilian squirrels”? Or are the implications minor? Try not to boast about your study or present its impact as  too  far-reaching, as researchers and journals will tend to be skeptical of bold claims in scientific papers. Answer one of these questions:

• What are the exact effects of these results on my field? On the wider world?
• What other kind of study would yield further solutions to problems?
• What other information is needed to expand knowledge in this area?

After Completing the First Draft of Your Abstract

Revise your abstract.

The abstract, like any piece of academic writing, should be revised before being considered complete. Check it for  grammatical and spelling errors  and make sure it is formatted properly.

Get feedback from a peer

Getting a fresh set of eyes to review your abstract is a great way to find out whether you’ve summarized your research well. Find a reader who understands research papers but is not an expert in this field or is not affiliated with your study. Ask your reader to summarize what your study is about (including all key points of each section). This should tell you if you have communicated your key points clearly.

In addition to research peers, consider consulting with a professor or even a specialist or generalist writing center consultant about your abstract. Use any resource that helps you see your work from another perspective.

Consider getting professional editing and proofreading

While peer feedback is quite important to ensure the effectiveness of your abstract content, it may be a good idea to find an academic editor  to fix mistakes in grammar, spelling, mechanics, style, or formatting. The presence of basic errors in the abstract may not affect your content, but it might dissuade someone from reading your entire study. Wordvice provides English editing services that both correct objective errors and enhance the readability and impact of your work.

Additional Abstract Rules and Guidelines

Write your abstract after completing your paper.

Although the abstract goes at the beginning of your manuscript, it does not merely introduce your research topic (that is the job of the title), but rather summarizes your entire paper. Writing the abstract last will ensure that it is complete and consistent with the findings and statements in your paper.

Keep your content in the correct order

Both questions and answers should be organized in a standard and familiar way to make the content easier for readers to absorb. Ideally, it should mimic the overall format of your essay and the classic “introduction,” “body,” and “conclusion” form, even if the parts are not neatly divided as such.

Write the abstract from scratch

Because the abstract is a self-contained piece of writing viewed separately from the body of the paper, you should write it separately as well. Never copy and paste direct quotes from the paper and avoid paraphrasing sentences in the paper. Using new vocabulary and phrases will keep your abstract interesting and free of redundancies while conserving space.

Don’t include too many details in the abstract

Again, the density of your abstract makes it incompatible with including specific points other than possibly names or locations. You can make references to terms, but do not explain or define them in the abstract. Try to strike a balance between being specific to your study and presenting a relatively broad overview of your work.

Wordvice Resources

If you think your abstract is fine now but you need input on abstract writing or require English editing services (including paper editing ), then head over to the Wordvice academic resources page, where you will find many more articles, for example on writing the Results , Methods , and Discussion sections of your manuscript, on choosing a title for your paper , or on how to finalize your journal submission with a strong cover letter .    

How to Research

• The Research Process: step-by-step
• Searching Google for information
• Boolean Operators
• JSTOR database
• EBSCO Databases
• Informit Database
• Britannica School Australia
• Issues in Society Publications
• Critical analysis
• Sample Literature Reviews
• Scaffold examples for organising Literature Reviews
• Writing an Abstract
• Creating Appendicies
• APA Reference Guide
• Library Resources
• Guide References

What is an Abstract?

An abstract is a short summary of an article, essay or research findings. A well-written abstract will provide the reader with a brief overview of the entire article, including the article's purpose, methodology and conclusion. An abstract should give the reader enough detail to determine if the information in the article meets their research needs...and it should make them want to read more!

While an abstract is usually anywhere between 150 - 300 words, it is important to always establish with your teacher the desired length of the abstract you are submitting.

This excellent guide from the University of Melbourne is a great snapshot of how to write an abstract.

Here are a few links to some useful abstract examples:

University of New South Wales

University of Wollongong

Michigan State University

• << Previous: Scaffold examples for organising Literature Reviews
• Next: Creating Appendicies >>
• Last Updated: Mar 25, 2024 3:31 PM
• URL: https://saintpatricks-nsw.libguides.com/library_how_to_research

How to Practice Academic Medicine and Publish from Developing Countries? pp 179–184 Cite as

How to Write an Abstract?

• Samiran Nundy 4 ,
• Atul Kakar 5 &
• Zulfiqar A. Bhutta 6  
• Open Access
• First Online: 24 October 2021

55k Accesses

5 Altmetric

An abstract is a crisp, short, powerful, and self-contained summary of a research manuscript used to help the reader swiftly determine the paper’s purpose. Although the abstract is the first paragraph of the manuscript it should be written last when all the other sections have been addressed.

Research is formalized curiosity. It is poking and prying with a purpose. — Zora Neale Hurston, American Author, Anthropologist and Filmmaker (1891–1960)

Download chapter PDF

1 What is an Abstract?

An abstract is usually a standalone document that informs the reader about the details of the manuscript to follow. It is like a trailer to a movie, if the trailer is good, it stimulates the audience to watch the movie. The abstract should be written from scratch and not ‘cut –and-pasted’ [ 1 ].

2 What is the History of the Abstract?

An abstract, in the form of a single paragraph, was first published in the Canadian Medical Association Journal in 1960 with the idea that the readers may not have enough time to go through the whole paper, and the first abstract with a defined structure was published in 1991 [ 2 ]. The idea sold and now most original articles and reviews are required to have a structured abstract. The abstract attracts the reader to read the full manuscript [ 3 ].

3 What are the Qualities of a Good Abstract?

The quality of information in an abstract can be summarized by four ‘C’s. It should be:

C: Condensed

C: Critical

4 What are the Types of Abstract?

Before writing the abstract, you need to check with the journal website about which type of abstract it requires, with its length and style in the ‘Instructions to Authors’ section.

The abstract types can be divided into:

Descriptive: Usually written for psychology, social science, and humanities papers. It is about 50–100 words long. No conclusions can be drawn from this abstract as it describes the major points in the paper.

Informative: The majority of abstracts for science-related manuscripts are informative and are surrogates for the research done. They are single paragraphs that provide the reader an overview of the research paper and are about 100–150 words in length. Conclusions can be drawn from the abstracts and in the recommendations written in the last line.

Critical: This type of abstract is lengthy and about 400–500 words. In this, the authors’ own research is discussed for reliability, judgement, and validation. A comparison is also made with similar studies done earlier.

Highlighting: This is rarely used in scientific writing. The style of the abstract is to attract more readers. It is not a balanced or complete overview of the article with which it is published.

Structured: A structured abstract contains information under subheadings like background, aims, material and methods, results, conclusion, and recommendations (Fig. 15.1 ). Most leading journals now carry these.

Example of a structured abstract (with permission editor CMRP)

5 What is the Purpose of an Abstract?

An abstract is written to educate the reader about the study that follows and provide an overview of the science behind it. If written well it also attracts more readers to the article. It also helps the article getting indexed. The fate of a paper both before and after publication often depends upon its abstract. Most readers decide if a paper is worth reading on the basis of the abstract. Additionally, the selection of papers in systematic reviews is often dependent upon the abstract.

6 What are the Steps of Writing an Abstract?

An abstract should be written last after all the other sections of an article have been addressed. A poor abstract may turn off the reader and they may cause indexing errors as well. The abstract should state the purpose of the study, the methodology used, and summarize the results and important conclusions. It is usually written in the IMRAD format and is called a structured abstract [ 4 , 5 ].

I: The introduction in the opening line should state the problem you are addressing.

M: Methodology—what method was chosen to finish the experiment?

R: Results—state the important findings of your study.

D: Discussion—discuss why your study is important.

Mention the following information:

Important results with the statistical information ( p values, confidence intervals, standard/mean deviation).

Arrange all information in a chronological order.

Do not repeat any information.

The last line should state the recommendations from your study.

The abstract should be written in the past tense.

7 What are the Things to Be Avoided While Writing an Abstract?

Cut and paste information from the main text

Hold back important information

Use abbreviations

Tables or Figures

Generalized statements

Arguments about the study

8 What are Key Words?

These are important words that are repeated throughout the manuscript and which help in the indexing of a paper. Depending upon the journal 3–10 key words may be required which are indexed with the help of MESH (Medical Subject Heading).

9 How is an Abstract Written for a Conference Different from a Journal Paper?

The basic concept for writing abstracts is the same. However, in a conference abstract occasionally a table or figure is allowed. A word limit is important in both of them. Many of the abstracts which are presented in conferences are never published in fact one study found that only 27% of the abstracts presented in conferences were published in the next five years [ 6 ].

Table 15.1 gives a template for writing an abstract.

10 What are the Important Recommendations of the International Committees of Medical Journal of Editors?

The recommendations are [ 7 ]:

An abstract is required for original articles, metanalysis, and systematic reviews.

A structured abstract is preferred.

The abstract should mention the purpose of the scientific study, how the procedure was carried out, the analysis used, and principal conclusion.

Clinical trials should be reported according to the CONSORT guidelines.

The trials should also mention the funding and the trial number.

The abstract should be accurate as many readers have access only to the abstract.

11 Conclusions

An Abstract should be written last after all the other sections of the manuscript have been completed and with due care and attention to the details.

It should be structured and written in the IMRAD format.

For many readers, the abstract attracts them to go through the complete content of the article.

The abstract is usually followed by key words that help to index the paper.

Andrade C. How to write a good abstract for a scientific paper or conference presentation? Indian J Psychiatry. 2011;53:172–5.

Article   Google Scholar  

Squires BP. Structured abstracts of original research and review articles. CMAJ. 1990;143:619–22.

CAS   PubMed   PubMed Central   Google Scholar  

Pierson DJ. How to write an abstract that will be accepted for presentation at a national meeting. Respir Care. 2004 Oct;49:1206–12.

PubMed   Google Scholar  

Tenenbein M. The abstract and the academic clinician. Pediatr Emerg Care. 1995;11:40–2.

Article   CAS   Google Scholar  

Bahadoran Z, Mirmiran P, Kashfi K, Ghasemi A. The principles of biomedical scientific writing: abstract and keywords. Int J Endocrinol Metab. 2020;18:e100159.

PubMed   PubMed Central   Google Scholar  

Grover S, Dalton N. Abstract to publication rate: do all the papers presented in conferences see the light of being a full publication? Indian J Psychiatry. 2020;62:73–9.

Preparing a manuscript for submission to a medical journal. Available on http://www.icmje.org/recommendations/browse/manuscript-preparation/preparing-for-submission.html . Accessed 10 May 2020.

Download references

Author information

Authors and affiliations.

Department of Surgical Gastroenterology and Liver Transplantation, Sir Ganga Ram Hospital, New Delhi, India

Samiran Nundy

Department of Internal Medicine, Sir Ganga Ram Hospital, New Delhi, India

Institute for Global Health and Development, The Aga Khan University, South Central Asia, East Africa and United Kingdom, Karachi, Pakistan

Zulfiqar A. Bhutta

You can also search for this author in PubMed   Google Scholar

Rights and permissions

Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/ ), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

Reprints and permissions

Copyright information

© 2022 The Author(s)

About this chapter

Cite this chapter.

Nundy, S., Kakar, A., Bhutta, Z.A. (2022). How to Write an Abstract?. In: How to Practice Academic Medicine and Publish from Developing Countries?. Springer, Singapore. https://doi.org/10.1007/978-981-16-5248-6_15

Download citation

DOI : https://doi.org/10.1007/978-981-16-5248-6_15

Published : 24 October 2021

Publisher Name : Springer, Singapore

Print ISBN : 978-981-16-5247-9

Online ISBN : 978-981-16-5248-6

eBook Packages : Medicine Medicine (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

Northwell/ZSOM Advancing ERSD - Putting It All Together (PIAT): The Art of Writing for Dissemination: Class 2, Part 1: Writing the Introduction

• Welcome to the PIAT Series Guide!
• Class 1, Part 1: The Art and Science of Writing
• Class 1, Part 2: Facing The Blank Page
• Class 1, Part 3: Writing the Abstract as a Team
• More Resources on Abstract Writing
• Class 2, Part 1: Writing the Introduction
• Class 2, Part 2: Writing the Methods
• Class 2, Part 3: Present Your Results Through Data Visualization

Resources Shared In Part 1 of Class No. 2: Writing the Introduction

The Problem, Gap, and Hook Technique

MedEd Mentor

Books On Writing - Getting Organized, Writing the Introduction

AM Last Page: Writing a Story, Not Study

A decent research paper reports a study. But a great research paper tells a story.

Review this Academic Medicine Last Page by Lorelei Linguard and Chris Watling to learn more.

• Writing a Research Paper Introduction

The introduction to a  research paper  is where you set up your topic and approach for the reader. It has several key goals:

• Present your topic and get the reader interested
• Provide background or summarize existing research
• Position your own approach
• Detail your specific  research problem  and  problem statement
• State the purpose

The five parts of the introduction might be represented in the following way (Creswell, 2014, p. 112). 

• Introductions for Research Papers

Advice from Published MD on Writing an Introduction

• << Previous: More Resources on Abstract Writing
• Next: Class 2, Part 2: Writing the Methods >>
• Last Updated: Mar 25, 2024 1:25 PM
• URL: https://libguides.hofstra.edu/Advancing_ERSD_PIAT_TheArtofWriting

This site is compliant with the W3C-WAI Web Content Accessibility Guidelines HOFSTRA UNIVERSITY Hempstead, NY 11549-1000 (516) 463-6600 © 2000-2009 Hofstra University

4 Examples of Academic Writing

#scribendiinc

Written by  Scribendi

The best way to understand what effective academic writing looks like is to review academic writing examples.

Let's begin with four of the most common types of academic writing: research proposals, dissertations, abstracts, and academic articles. We'll be examining each type of writing and providing academic writing samples of each. 

Whether you aim to earn funding for a passion project or are stymied by how to format an abstract, these academic writing examples will help you nail your next undertaking.

Academic Writing Example 1: Research Proposals

A research proposal is an outline of the proposed research of a PhD candidate, a private researcher, or someone hoping to obtain a research grant . 

Your proposal should put your best foot forward: It details your intended research question and how it relates to existing research, makes an argument for why your research should be chosen for advancement or funding, and explains the deliverables you hope to achieve with your research. 

A more detailed look at what proposal writing is and what goes into a research proposal may also be beneficial. Every proposal is different because every project is different. Proposal requirements also differ according to the university or funding agency that reviews the proposal. 

Research Proposal Structure

A cover letter summarizing your proposal and showcasing why you should be chosen

An introduction or abstract

An explanation of the background, purpose, and significance of your research

A research plan or methodology that includes a timeline (a Gantt chart may be beneficial)

A projected budget, if applicable

Academic Writing Sample: Research Proposal Excerpt

Building on the work of the three foundational sociological theorists—Marx, Weber, and Durkheim—and Mark Traugott's theory of the "insurgent barricade," this proposed research will analyze the appearance, use, and disappearance of barricade warfare as an effective battle strategy. 

Focusing on these three theorists, this research will determine which theory or theories best explain the life cycle of barricade warfare, focusing in particular on its disappearance. A brief but comprehensive history of barricade warfare will be provided in addition to the theoretical explanations of barricade warfare's utility.

Research Proposal Writing Tips

Before you format your proposal, contact your targeted university, private organization, or funding agency to confirm what they require for proposals. Then, try to follow this format as closely as possible.

Be detailed when outlining your goals and your funding needs. Connect the objectives of the research to the resources you're requesting.

Be realistic in what you ask for as far as resources—don't ask for more or less than you need, and show evidence to justify your choices.

Don't dedicate too much text in your proposal to describing past research. A summary of key points, arguments, theories, and how your research will build on them should suffice.

Remember that no matter how good your proposal is, it might be rejected. You're likely up against dozens or even hundreds of other candidates who have equally sound proposals. Don't be discouraged if this happens. See it as a learning opportunity for your next proposal.

Academic Writing Example 2: Dissertations

A dissertation is a body of writing that represents original research and is generally written as part of a PhD or master's program. 

Typically, it builds on previous research in the field to make a significant contribution or advancement. You may benefit from more detailed information on what a dissertation is , how to write a dissertation , and how to edit a dissertation .

Dissertation Structure

Introduction/background and the significance of the study

Literature review

Methodology

Results/findings

Conclusion/contribution to the body of research

Academic Writing Sample: Dissertation Excerpt

There are two options for choosing a unit of analysis for this phenomenon: the social artifact (erected barricades) or the social interaction (the collaboration of insurgents engaged in barricade warfare). The best choice is social interaction. 

Most individual occurrences of barricade warfare involve the construction of more than one barricade, and the number of barricades is not necessarily a valid indicator of the sociological magnitude of an insurgence. The most relevant choice is an insurgence, the event of a conflict involving barricade warfare.

Dissertation Writing Tips

Remember to bear in mind the significance of your study. It doesn't have to be paradigm shifting, but you want to infuse the dissertation with reminders of why your research is important.

Don't get bogged down in trying to show that your research is one of a kind or uniquely contributive to the body of research. It likely isn't, and it's more effective to show how you are building on previous research .

Remember to check with your college or university to ensure that you're formatting your dissertation according to the school's expectations.

Ask your advisor questions when you need to.

Be prepared to make alterations to your dissertation according to your thesis committee's suggestions. This doesn't mean you did a bad job—it just means there's room for improvement.

Academic Writing Example 3: Abstracts

The abstract is actually a component of other forms of academic writing, such as scholarly articles and dissertations. The abstract acts as a comprehensive outline of your paper in paragraph form. 

Abstract Structure

Results 

You may want to read more about what abstracts are and why they are important in preparing yourself for writing one.

Academic Writing Sample: Abstract

Barricade warfare has occurred across several spectra, but most notably, it occurred almost exclusively in a 300-year period between the 16th and 19th centuries. Each instance had an inciting incident, but a common thread was the culture of revolution: a revolutionary tradition based on the belief that injustice was being carried out and that, in this case, barricade insurgence was the way to resolve it. 

This study uses the theories of Karl Marx and Emile Durkheim to analyze barricade warfare, its appearance, and its disappearance. Ultimately, neither theory can independently explain this phenomenon. 

Marx offers a reasonable explanation for why barricade warfare may have died, but his theory is difficult to test empirically and fails to explain the absence of recurrences. Conversely, Durkheim's theory is much easier to observe and can explain why barricade warfare has not experienced a renaissance. However, he offered no reason as to why it died in the first place. 

These two theoretical orientations complement each other nicely and, ultimately, neither can stand alone.

Notice that this abstract comes in at under 200 words (a common limit) but nevertheless covers the background of the study, how it was approached, and the results and conclusions of the research. 

If you are struggling to meet a word count, check out 10 Academic Phrases Your Writing Doesn't Need .

Abstract Writing Tips

Be conscious of your word count. Stay under the limit.

Check with your school or target journal to make sure special formatting is not required.

Don't use abbreviations or citations in the abstract.

Don't simply restate your thesis or copy your introduction. Neither of these is an abstract.

Remember that your abstract often gives readers their first impressions of your work. Despite its short length, it deserves a lot of attention. 

Academic Writing Example 4: Articles

Academic articles are pieces of writing intended for publication in academic journals or other scholarly sources. They may be original research studies, literature analyses, critiques , or other forms of scholarly writing.

Article Structure

Abstract and keywords

Introduction

Materials and methods

References and appendices

Academic Writing Sample: Article Excerpt

"Those great revolutionary barricades were places where heroes came together" (Hugo, 2008). This description by Victor Hugo of the 1832 June Rebellion in Paris comes from his seminal work of fiction, Les Miserables. 

Although the account is fictionalized, it is deeply representative of what historian Mark Traugott (2010, p. 225) terms the "culture of revolution." This spirit of heroic response to social injustice swept across Europe during the second half of the millennium and was characterized in part by barricade warfare. 

The phenomenon of the insurgent barricade has essentially disappeared, however, leaving no trace of its short-lived but intense epoch, and the question of why this happened remains a mystery. The theories of Karl Marx and Emile Durkheim, when taken together, provide a compelling explanation for the disappearance of barricade warfare, and the tenets of each theory will be examined to explain this phenomenon.

Article Writing Tips

Follow these detailed steps for writing an article and publishing it in a journal .

Make sure that you follow all of your target journal's guidelines.

Have a second set of educated eyes look over your article to correct typos, confusing language, and unclear arguments.

Don't be discouraged if your article is not chosen for publication. As with proposal writing, you are up against countless others with equally compelling research.

Don't be discouraged if the journal asks you to make changes to your article. This is common. It means they see value in your article, as well as room for improvement.

Whether you're applying for funding, earning an advanced degree, aiming to publish in a journal, or just trying to cram your 4,000-word study into a 150-word abstract, hopefully these academic writing examples have helped get your creative juices flowing. 

Go out there and write! With these academic writing samples at your side, you are sure to model your academic writing appropriately.

Achieve Your Academic Goals

Hire an expert academic editor , or get a free sample, about the author.

Scribendi's in-house editors work with writers from all over the globe to perfect their writing. They know that no piece of writing is complete without a professional edit, and they love to see a good piece of writing transformed into a great one. Scribendi's in-house editors are unrivaled in both experience and education, having collectively edited millions of words and obtained numerous degrees. They love consuming caffeinated beverages, reading books of various genres, and relaxing in quiet, dimly lit spaces.

Have You Read?

"The Complete Beginner's Guide to Academic Writing"

Related Posts

10 Academic Phrases Your Writing Doesn't Need

21 Legit Research Databases for Free Journal Articles in 2022

Grant Writing Basics

Upload your file(s) so we can calculate your word count, or enter your word count manually.

We will also recommend a service based on the file(s) you upload.

English is not my first language. I need English editing and proofreading so that I sound like a native speaker.

I need to have my journal article, dissertation, or term paper edited and proofread, or I need help with an admissions essay or proposal.

I have a novel, manuscript, play, or ebook. I need editing, copy editing, proofreading, a critique of my work, or a query package.

I need editing and proofreading for my white papers, reports, manuals, press releases, marketing materials, and other business documents.

I need to have my essay, project, assignment, or term paper edited and proofread.

I want to sound professional and to get hired. I have a resume, letter, email, or personal document that I need to have edited and proofread.

 Prices include your personal % discount.

 Prices include % sales tax ( ).

How to Write an Essay Introduction (with Examples)   

The introduction of an essay plays a critical role in engaging the reader and providing contextual information about the topic. It sets the stage for the rest of the essay, establishes the tone and style, and motivates the reader to continue reading. 

Table of Contents

What is an essay introduction , what to include in an essay introduction, how to create an essay structure , step-by-step process for writing an essay introduction , how to write an introduction paragraph , how to write a hook for your essay , how to include background information , how to write a thesis statement .

• Argumentative Essay Introduction Example: 
• Expository Essay Introduction Example 

Literary Analysis Essay Introduction Example

Check and revise – checklist for essay introduction , key takeaways , frequently asked questions .

An introduction is the opening section of an essay, paper, or other written work. It introduces the topic and provides background information, context, and an overview of what the reader can expect from the rest of the work. 1 The key is to be concise and to the point, providing enough information to engage the reader without delving into excessive detail. 

The essay introduction is crucial as it sets the tone for the entire piece and provides the reader with a roadmap of what to expect. Here are key elements to include in your essay introduction: 

• Hook : Start with an attention-grabbing statement or question to engage the reader. This could be a surprising fact, a relevant quote, or a compelling anecdote. 
• Background information : Provide context and background information to help the reader understand the topic. This can include historical information, definitions of key terms, or an overview of the current state of affairs related to your topic. 
• Thesis statement : Clearly state your main argument or position on the topic. Your thesis should be concise and specific, providing a clear direction for your essay. 

Before we get into how to write an essay introduction, we need to know how it is structured. The structure of an essay is crucial for organizing your thoughts and presenting them clearly and logically. It is divided as follows: 2  

• Introduction:  The introduction should grab the reader’s attention with a hook, provide context, and include a thesis statement that presents the main argument or purpose of the essay.  
• Body:  The body should consist of focused paragraphs that support your thesis statement using evidence and analysis. Each paragraph should concentrate on a single central idea or argument and provide evidence, examples, or analysis to back it up.  
• Conclusion:  The conclusion should summarize the main points and restate the thesis differently. End with a final statement that leaves a lasting impression on the reader. Avoid new information or arguments. 

Here’s a step-by-step guide on how to write an essay introduction: 

• Start with a Hook : Begin your introduction paragraph with an attention-grabbing statement, question, quote, or anecdote related to your topic. The hook should pique the reader’s interest and encourage them to continue reading. 
• Provide Background Information : This helps the reader understand the relevance and importance of the topic. 
• State Your Thesis Statement : The last sentence is the main argument or point of your essay. It should be clear, concise, and directly address the topic of your essay. 
• Preview the Main Points : This gives the reader an idea of what to expect and how you will support your thesis. 
• Keep it Concise and Clear : Avoid going into too much detail or including information not directly relevant to your topic. 
• Revise : Revise your introduction after you’ve written the rest of your essay to ensure it aligns with your final argument. 

Here’s an example of an essay introduction paragraph about the importance of education: 

Education is often viewed as a fundamental human right and a key social and economic development driver. As Nelson Mandela once famously said, “Education is the most powerful weapon which you can use to change the world.” It is the key to unlocking a wide range of opportunities and benefits for individuals, societies, and nations. In today’s constantly evolving world, education has become even more critical. It has expanded beyond traditional classroom learning to include digital and remote learning, making education more accessible and convenient. This essay will delve into the importance of education in empowering individuals to achieve their dreams, improving societies by promoting social justice and equality, and driving economic growth by developing a skilled workforce and promoting innovation. 

This introduction paragraph example includes a hook (the quote by Nelson Mandela), provides some background information on education, and states the thesis statement (the importance of education). 

This is one of the key steps in how to write an essay introduction. Crafting a compelling hook is vital because it sets the tone for your entire essay and determines whether your readers will stay interested. A good hook draws the reader in and sets the stage for the rest of your essay.  

• Avoid Dry Fact : Instead of simply stating a bland fact, try to make it engaging and relevant to your topic. For example, if you’re writing about the benefits of exercise, you could start with a startling statistic like, “Did you know that regular exercise can increase your lifespan by up to seven years?” 
• Avoid Using a Dictionary Definition : While definitions can be informative, they’re not always the most captivating way to start an essay. Instead, try to use a quote, anecdote, or provocative question to pique the reader’s interest. For instance, if you’re writing about freedom, you could begin with a quote from a famous freedom fighter or philosopher. 
• Do Not Just State a Fact That the Reader Already Knows : This ties back to the first point—your hook should surprise or intrigue the reader. For Here’s an introduction paragraph example, if you’re writing about climate change, you could start with a thought-provoking statement like, “Despite overwhelming evidence, many people still refuse to believe in the reality of climate change.” 

Including background information in the introduction section of your essay is important to provide context and establish the relevance of your topic. When writing the background information, you can follow these steps: 

• Start with a General Statement:  Begin with a general statement about the topic and gradually narrow it down to your specific focus. For example, when discussing the impact of social media, you can begin by making a broad statement about social media and its widespread use in today’s society, as follows: “Social media has become an integral part of modern life, with billions of users worldwide.” 
• Define Key Terms : Define any key terms or concepts that may be unfamiliar to your readers but are essential for understanding your argument. 
• Provide Relevant Statistics:  Use statistics or facts to highlight the significance of the issue you’re discussing. For instance, “According to a report by Statista, the number of social media users is expected to reach 4.41 billion by 2025.” 
• Discuss the Evolution:  Mention previous research or studies that have been conducted on the topic, especially those that are relevant to your argument. Mention key milestones or developments that have shaped its current impact. You can also outline some of the major effects of social media. For example, you can briefly describe how social media has evolved, including positives such as increased connectivity and issues like cyberbullying and privacy concerns. 
• Transition to Your Thesis:  Use the background information to lead into your thesis statement, which should clearly state the main argument or purpose of your essay. For example, “Given its pervasive influence, it is crucial to examine the impact of social media on mental health.” 

A thesis statement is a concise summary of the main point or claim of an essay, research paper, or other type of academic writing. It appears near the end of the introduction. Here’s how to write a thesis statement: 

• Identify the topic:  Start by identifying the topic of your essay. For example, if your essay is about the importance of exercise for overall health, your topic is “exercise.” 
• State your position:  Next, state your position or claim about the topic. This is the main argument or point you want to make. For example, if you believe that regular exercise is crucial for maintaining good health, your position could be: “Regular exercise is essential for maintaining good health.” 
• Support your position:  Provide a brief overview of the reasons or evidence that support your position. These will be the main points of your essay. For example, if you’re writing an essay about the importance of exercise, you could mention the physical health benefits, mental health benefits, and the role of exercise in disease prevention. 
• Make it specific:  Ensure your thesis statement clearly states what you will discuss in your essay. For example, instead of saying, “Exercise is good for you,” you could say, “Regular exercise, including cardiovascular and strength training, can improve overall health and reduce the risk of chronic diseases.” 

Examples of essay introduction 

Here are examples of essay introductions for different types of essays: 

Argumentative Essay Introduction Example:  

Topic: Should the voting age be lowered to 16? 

“The question of whether the voting age should be lowered to 16 has sparked nationwide debate. While some argue that 16-year-olds lack the requisite maturity and knowledge to make informed decisions, others argue that doing so would imbue young people with agency and give them a voice in shaping their future.” 

Expository Essay Introduction Example  

Topic: The benefits of regular exercise 

“In today’s fast-paced world, the importance of regular exercise cannot be overstated. From improving physical health to boosting mental well-being, the benefits of exercise are numerous and far-reaching. This essay will examine the various advantages of regular exercise and provide tips on incorporating it into your daily routine.” 

Text: “To Kill a Mockingbird” by Harper Lee 

“Harper Lee’s novel, ‘To Kill a Mockingbird,’ is a timeless classic that explores themes of racism, injustice, and morality in the American South. Through the eyes of young Scout Finch, the reader is taken on a journey that challenges societal norms and forces characters to confront their prejudices. This essay will analyze the novel’s use of symbolism, character development, and narrative structure to uncover its deeper meaning and relevance to contemporary society.” 

• Engaging and Relevant First Sentence : The opening sentence captures the reader’s attention and relates directly to the topic. 
• Background Information : Enough background information is introduced to provide context for the thesis statement. 
• Definition of Important Terms : Key terms or concepts that might be unfamiliar to the audience or are central to the argument are defined. 
• Clear Thesis Statement : The thesis statement presents the main point or argument of the essay. 
• Relevance to Main Body : Everything in the introduction directly relates to and sets up the discussion in the main body of the essay. 

Writing a strong introduction is crucial for setting the tone and context of your essay. Here are the key takeaways for how to write essay introduction: 3  

• Hook the Reader : Start with an engaging hook to grab the reader’s attention. This could be a compelling question, a surprising fact, a relevant quote, or an anecdote. 
• Provide Background : Give a brief overview of the topic, setting the context and stage for the discussion. 
• Thesis Statement : State your thesis, which is the main argument or point of your essay. It should be concise, clear, and specific. 
• Preview the Structure : Outline the main points or arguments to help the reader understand the organization of your essay. 
• Keep it Concise : Avoid including unnecessary details or information not directly related to your thesis. 
• Revise and Edit : Revise your introduction to ensure clarity, coherence, and relevance. Check for grammar and spelling errors. 
• Seek Feedback : Get feedback from peers or instructors to improve your introduction further. 

The purpose of an essay introduction is to give an overview of the topic, context, and main ideas of the essay. It is meant to engage the reader, establish the tone for the rest of the essay, and introduce the thesis statement or central argument.  

An essay introduction typically ranges from 5-10% of the total word count. For example, in a 1,000-word essay, the introduction would be roughly 50-100 words. However, the length can vary depending on the complexity of the topic and the overall length of the essay.

An essay introduction is critical in engaging the reader and providing contextual information about the topic. To ensure its effectiveness, consider incorporating these key elements: a compelling hook, background information, a clear thesis statement, an outline of the essay’s scope, a smooth transition to the body, and optional signposting sentences.  

The process of writing an essay introduction is not necessarily straightforward, but there are several strategies that can be employed to achieve this end. When experiencing difficulty initiating the process, consider the following techniques: begin with an anecdote, a quotation, an image, a question, or a startling fact to pique the reader’s interest. It may also be helpful to consider the five W’s of journalism: who, what, when, where, why, and how.   For instance, an anecdotal opening could be structured as follows: “As I ascended the stage, momentarily blinded by the intense lights, I could sense the weight of a hundred eyes upon me, anticipating my next move. The topic of discussion was climate change, a subject I was passionate about, and it was my first public speaking event. Little did I know , that pivotal moment would not only alter my perspective but also chart my life’s course.” 

Crafting a compelling thesis statement for your introduction paragraph is crucial to grab your reader’s attention. To achieve this, avoid using overused phrases such as “In this paper, I will write about” or “I will focus on” as they lack originality. Instead, strive to engage your reader by substantiating your stance or proposition with a “so what” clause. While writing your thesis statement, aim to be precise, succinct, and clear in conveying your main argument.  

To create an effective essay introduction, ensure it is clear, engaging, relevant, and contains a concise thesis statement. It should transition smoothly into the essay and be long enough to cover necessary points but not become overwhelming. Seek feedback from peers or instructors to assess its effectiveness. 

References  

• Cui, L. (2022). Unit 6 Essay Introduction.  Building Academic Writing Skills . 
• West, H., Malcolm, G., Keywood, S., & Hill, J. (2019). Writing a successful essay.  Journal of Geography in Higher Education ,  43 (4), 609-617. 
• Beavers, M. E., Thoune, D. L., & McBeth, M. (2023). Bibliographic Essay: Reading, Researching, Teaching, and Writing with Hooks: A Queer Literacy Sponsorship. College English, 85(3), 230-242. 

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• What is an Argumentative Essay? How to Write It (With Examples)
• How to Paraphrase Research Papers Effectively
• How to Cite Social Media Sources in Academic Writing? 

How Long Should a Chapter Be?

Similarity checks: the author’s guide to plagiarism and responsible writing, types of plagiarism and 6 tips to avoid it in your writing , you may also like, what are journal guidelines on using generative ai..., types of plagiarism and 6 tips to avoid..., similarity checks: the author’s guide to plagiarism and..., what is a master’s thesis: a guide for..., should you use ai tools like chatgpt for..., what are the benefits of generative ai for..., how to avoid plagiarism tips and advice for..., plagiarism checkers vs. ai content detection: navigating the..., plagiarism prevention: why you need a plagiarism check....

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• My Account Login
• Explore content
• About the journal
• Publish with us
• Sign up for alerts
• Open access
• Published: 26 March 2024

Predicting and improving complex beer flavor through machine learning

• Michiel Schreurs   ORCID: orcid.org/0000-0002-9449-5619 1 , 2 , 3   na1 ,
• Supinya Piampongsant 1 , 2 , 3   na1 ,
• Miguel Roncoroni   ORCID: orcid.org/0000-0001-7461-1427 1 , 2 , 3   na1 ,
• Lloyd Cool   ORCID: orcid.org/0000-0001-9936-3124 1 , 2 , 3 , 4 ,
• Beatriz Herrera-Malaver   ORCID: orcid.org/0000-0002-5096-9974 1 , 2 , 3 ,
• Christophe Vanderaa   ORCID: orcid.org/0000-0001-7443-5427 4 ,
• Florian A. Theßeling 1 , 2 , 3 ,
• Łukasz Kreft   ORCID: orcid.org/0000-0001-7620-4657 5 ,
• Alexander Botzki   ORCID: orcid.org/0000-0001-6691-4233 5 ,
• Philippe Malcorps 6 ,
• Luk Daenen 6 ,
• Tom Wenseleers   ORCID: orcid.org/0000-0002-1434-861X 4 &
• Kevin J. Verstrepen   ORCID: orcid.org/0000-0002-3077-6219 1 , 2 , 3  

Nature Communications volume  15 , Article number:  2368 ( 2024 ) Cite this article

36k Accesses

741 Altmetric

Metrics details

• Chemical engineering
• Gas chromatography
• Machine learning
• Metabolomics
• Taste receptors

The perception and appreciation of food flavor depends on many interacting chemical compounds and external factors, and therefore proves challenging to understand and predict. Here, we combine extensive chemical and sensory analyses of 250 different beers to train machine learning models that allow predicting flavor and consumer appreciation. For each beer, we measure over 200 chemical properties, perform quantitative descriptive sensory analysis with a trained tasting panel and map data from over 180,000 consumer reviews to train 10 different machine learning models. The best-performing algorithm, Gradient Boosting, yields models that significantly outperform predictions based on conventional statistics and accurately predict complex food features and consumer appreciation from chemical profiles. Model dissection allows identifying specific and unexpected compounds as drivers of beer flavor and appreciation. Adding these compounds results in variants of commercial alcoholic and non-alcoholic beers with improved consumer appreciation. Together, our study reveals how big data and machine learning uncover complex links between food chemistry, flavor and consumer perception, and lays the foundation to develop novel, tailored foods with superior flavors.

Similar content being viewed by others

BitterSweet: Building machine learning models for predicting the bitter and sweet taste of small molecules

Rudraksh Tuwani, Somin Wadhwa & Ganesh Bagler

Sensory lexicon and aroma volatiles analysis of brewing malt

Xiaoxia Su, Miao Yu, … Tianyi Du

Predicting odor from molecular structure: a multi-label classification approach

Kushagra Saini & Venkatnarayan Ramanathan

Introduction

Predicting and understanding food perception and appreciation is one of the major challenges in food science. Accurate modeling of food flavor and appreciation could yield important opportunities for both producers and consumers, including quality control, product fingerprinting, counterfeit detection, spoilage detection, and the development of new products and product combinations (food pairing) 1 , 2 , 3 , 4 , 5 , 6 . Accurate models for flavor and consumer appreciation would contribute greatly to our scientific understanding of how humans perceive and appreciate flavor. Moreover, accurate predictive models would also facilitate and standardize existing food assessment methods and could supplement or replace assessments by trained and consumer tasting panels, which are variable, expensive and time-consuming 7 , 8 , 9 . Lastly, apart from providing objective, quantitative, accurate and contextual information that can help producers, models can also guide consumers in understanding their personal preferences 10 .

Despite the myriad of applications, predicting food flavor and appreciation from its chemical properties remains a largely elusive goal in sensory science, especially for complex food and beverages 11 , 12 . A key obstacle is the immense number of flavor-active chemicals underlying food flavor. Flavor compounds can vary widely in chemical structure and concentration, making them technically challenging and labor-intensive to quantify, even in the face of innovations in metabolomics, such as non-targeted metabolic fingerprinting 13 , 14 . Moreover, sensory analysis is perhaps even more complicated. Flavor perception is highly complex, resulting from hundreds of different molecules interacting at the physiochemical and sensorial level. Sensory perception is often non-linear, characterized by complex and concentration-dependent synergistic and antagonistic effects 15 , 16 , 17 , 18 , 19 , 20 , 21 that are further convoluted by the genetics, environment, culture and psychology of consumers 22 , 23 , 24 . Perceived flavor is therefore difficult to measure, with problems of sensitivity, accuracy, and reproducibility that can only be resolved by gathering sufficiently large datasets 25 . Trained tasting panels are considered the prime source of quality sensory data, but require meticulous training, are low throughput and high cost. Public databases containing consumer reviews of food products could provide a valuable alternative, especially for studying appreciation scores, which do not require formal training 25 . Public databases offer the advantage of amassing large amounts of data, increasing the statistical power to identify potential drivers of appreciation. However, public datasets suffer from biases, including a bias in the volunteers that contribute to the database, as well as confounding factors such as price, cult status and psychological conformity towards previous ratings of the product.

Classical multivariate statistics and machine learning methods have been used to predict flavor of specific compounds by, for example, linking structural properties of a compound to its potential biological activities or linking concentrations of specific compounds to sensory profiles 1 , 26 . Importantly, most previous studies focused on predicting organoleptic properties of single compounds (often based on their chemical structure) 27 , 28 , 29 , 30 , 31 , 32 , 33 , thus ignoring the fact that these compounds are present in a complex matrix in food or beverages and excluding complex interactions between compounds. Moreover, the classical statistics commonly used in sensory science 34 , 35 , 36 , 37 , 38 , 39 require a large sample size and sufficient variance amongst predictors to create accurate models. They are not fit for studying an extensive set of hundreds of interacting flavor compounds, since they are sensitive to outliers, have a high tendency to overfit and are less suited for non-linear and discontinuous relationships 40 .

In this study, we combine extensive chemical analyses and sensory data of a set of different commercial beers with machine learning approaches to develop models that predict taste, smell, mouthfeel and appreciation from compound concentrations. Beer is particularly suited to model the relationship between chemistry, flavor and appreciation. First, beer is a complex product, consisting of thousands of flavor compounds that partake in complex sensory interactions 41 , 42 , 43 . This chemical diversity arises from the raw materials (malt, yeast, hops, water and spices) and biochemical conversions during the brewing process (kilning, mashing, boiling, fermentation, maturation and aging) 44 , 45 . Second, the advent of the internet saw beer consumers embrace online review platforms, such as RateBeer (ZX Ventures, Anheuser-Busch InBev SA/NV) and BeerAdvocate (Next Glass, inc.). In this way, the beer community provides massive data sets of beer flavor and appreciation scores, creating extraordinarily large sensory databases to complement the analyses of our professional sensory panel. Specifically, we characterize over 200 chemical properties of 250 commercial beers, spread across 22 beer styles, and link these to the descriptive sensory profiling data of a 16-person in-house trained tasting panel and data acquired from over 180,000 public consumer reviews. These unique and extensive datasets enable us to train a suite of machine learning models to predict flavor and appreciation from a beer’s chemical profile. Dissection of the best-performing models allows us to pinpoint specific compounds as potential drivers of beer flavor and appreciation. Follow-up experiments confirm the importance of these compounds and ultimately allow us to significantly improve the flavor and appreciation of selected commercial beers. Together, our study represents a significant step towards understanding complex flavors and reinforces the value of machine learning to develop and refine complex foods. In this way, it represents a stepping stone for further computer-aided food engineering applications 46 .

To generate a comprehensive dataset on beer flavor, we selected 250 commercial Belgian beers across 22 different beer styles (Supplementary Fig.  S1 ). Beers with ≤ 4.2% alcohol by volume (ABV) were classified as non-alcoholic and low-alcoholic. Blonds and Tripels constitute a significant portion of the dataset (12.4% and 11.2%, respectively) reflecting their presence on the Belgian beer market and the heterogeneity of beers within these styles. By contrast, lager beers are less diverse and dominated by a handful of brands. Rare styles such as Brut or Faro make up only a small fraction of the dataset (2% and 1%, respectively) because fewer of these beers are produced and because they are dominated by distinct characteristics in terms of flavor and chemical composition.

Extensive analysis identifies relationships between chemical compounds in beer

For each beer, we measured 226 different chemical properties, including common brewing parameters such as alcohol content, iso-alpha acids, pH, sugar concentration 47 , and over 200 flavor compounds (Methods, Supplementary Table  S1 ). A large portion (37.2%) are terpenoids arising from hopping, responsible for herbal and fruity flavors 16 , 48 . A second major category are yeast metabolites, such as esters and alcohols, that result in fruity and solvent notes 48 , 49 , 50 . Other measured compounds are primarily derived from malt, or other microbes such as non- Saccharomyces yeasts and bacteria (‘wild flora’). Compounds that arise from spices or staling are labeled under ‘Others’. Five attributes (caloric value, total acids and total ester, hop aroma and sulfur compounds) are calculated from multiple individually measured compounds.

As a first step in identifying relationships between chemical properties, we determined correlations between the concentrations of the compounds (Fig.  1 , upper panel, Supplementary Data  1 and 2 , and Supplementary Fig.  S2 . For the sake of clarity, only a subset of the measured compounds is shown in Fig.  1 ). Compounds of the same origin typically show a positive correlation, while absence of correlation hints at parameters varying independently. For example, the hop aroma compounds citronellol, and alpha-terpineol show moderate correlations with each other (Spearman’s rho=0.39 and 0.57), but not with the bittering hop component iso-alpha acids (Spearman’s rho=0.16 and −0.07). This illustrates how brewers can independently modify hop aroma and bitterness by selecting hop varieties and dosage time. If hops are added early in the boiling phase, chemical conversions increase bitterness while aromas evaporate, conversely, late addition of hops preserves aroma but limits bitterness 51 . Similarly, hop-derived iso-alpha acids show a strong anti-correlation with lactic acid and acetic acid, likely reflecting growth inhibition of lactic acid and acetic acid bacteria, or the consequent use of fewer hops in sour beer styles, such as West Flanders ales and Fruit beers, that rely on these bacteria for their distinct flavors 52 . Finally, yeast-derived esters (ethyl acetate, ethyl decanoate, ethyl hexanoate, ethyl octanoate) and alcohols (ethanol, isoamyl alcohol, isobutanol, and glycerol), correlate with Spearman coefficients above 0.5, suggesting that these secondary metabolites are correlated with the yeast genetic background and/or fermentation parameters and may be difficult to influence individually, although the choice of yeast strain may offer some control 53 .

Spearman rank correlations are shown. Descriptors are grouped according to their origin (malt (blue), hops (green), yeast (red), wild flora (yellow), Others (black)), and sensory aspect (aroma, taste, palate, and overall appreciation). Please note that for the chemical compounds, for the sake of clarity, only a subset of the total number of measured compounds is shown, with an emphasis on the key compounds for each source. For more details, see the main text and Methods section. Chemical data can be found in Supplementary Data  1 , correlations between all chemical compounds are depicted in Supplementary Fig.  S2 and correlation values can be found in Supplementary Data  2 . See Supplementary Data  4 for sensory panel assessments and Supplementary Data  5 for correlation values between all sensory descriptors.

Interestingly, different beer styles show distinct patterns for some flavor compounds (Supplementary Fig.  S3 ). These observations agree with expectations for key beer styles, and serve as a control for our measurements. For instance, Stouts generally show high values for color (darker), while hoppy beers contain elevated levels of iso-alpha acids, compounds associated with bitter hop taste. Acetic and lactic acid are not prevalent in most beers, with notable exceptions such as Kriek, Lambic, Faro, West Flanders ales and Flanders Old Brown, which use acid-producing bacteria ( Lactobacillus and Pediococcus ) or unconventional yeast ( Brettanomyces ) 54 , 55 . Glycerol, ethanol and esters show similar distributions across all beer styles, reflecting their common origin as products of yeast metabolism during fermentation 45 , 53 . Finally, low/no-alcohol beers contain low concentrations of glycerol and esters. This is in line with the production process for most of the low/no-alcohol beers in our dataset, which are produced through limiting fermentation or by stripping away alcohol via evaporation or dialysis, with both methods having the unintended side-effect of reducing the amount of flavor compounds in the final beer 56 , 57 .

Besides expected associations, our data also reveals less trivial associations between beer styles and specific parameters. For example, geraniol and citronellol, two monoterpenoids responsible for citrus, floral and rose flavors and characteristic of Citra hops, are found in relatively high amounts in Christmas, Saison, and Brett/co-fermented beers, where they may originate from terpenoid-rich spices such as coriander seeds instead of hops 58 .

Tasting panel assessments reveal sensorial relationships in beer

To assess the sensory profile of each beer, a trained tasting panel evaluated each of the 250 beers for 50 sensory attributes, including different hop, malt and yeast flavors, off-flavors and spices. Panelists used a tasting sheet (Supplementary Data  3 ) to score the different attributes. Panel consistency was evaluated by repeating 12 samples across different sessions and performing ANOVA. In 95% of cases no significant difference was found across sessions ( p  > 0.05), indicating good panel consistency (Supplementary Table  S2 ).

Aroma and taste perception reported by the trained panel are often linked (Fig.  1 , bottom left panel and Supplementary Data  4 and 5 ), with high correlations between hops aroma and taste (Spearman’s rho=0.83). Bitter taste was found to correlate with hop aroma and taste in general (Spearman’s rho=0.80 and 0.69), and particularly with “grassy” noble hops (Spearman’s rho=0.75). Barnyard flavor, most often associated with sour beers, is identified together with stale hops (Spearman’s rho=0.97) that are used in these beers. Lactic and acetic acid, which often co-occur, are correlated (Spearman’s rho=0.66). Interestingly, sweetness and bitterness are anti-correlated (Spearman’s rho = −0.48), confirming the hypothesis that they mask each other 59 , 60 . Beer body is highly correlated with alcohol (Spearman’s rho = 0.79), and overall appreciation is found to correlate with multiple aspects that describe beer mouthfeel (alcohol, carbonation; Spearman’s rho= 0.32, 0.39), as well as with hop and ester aroma intensity (Spearman’s rho=0.39 and 0.35).

Similar to the chemical analyses, sensorial analyses confirmed typical features of specific beer styles (Supplementary Fig.  S4 ). For example, sour beers (Faro, Flanders Old Brown, Fruit beer, Kriek, Lambic, West Flanders ale) were rated acidic, with flavors of both acetic and lactic acid. Hoppy beers were found to be bitter and showed hop-associated aromas like citrus and tropical fruit. Malt taste is most detected among scotch, stout/porters, and strong ales, while low/no-alcohol beers, which often have a reputation for being ‘worty’ (reminiscent of unfermented, sweet malt extract) appear in the middle. Unsurprisingly, hop aromas are most strongly detected among hoppy beers. Like its chemical counterpart (Supplementary Fig.  S3 ), acidity shows a right-skewed distribution, with the most acidic beers being Krieks, Lambics, and West Flanders ales.

Tasting panel assessments of specific flavors correlate with chemical composition

We find that the concentrations of several chemical compounds strongly correlate with specific aroma or taste, as evaluated by the tasting panel (Fig.  2 , Supplementary Fig.  S5 , Supplementary Data  6 ). In some cases, these correlations confirm expectations and serve as a useful control for data quality. For example, iso-alpha acids, the bittering compounds in hops, strongly correlate with bitterness (Spearman’s rho=0.68), while ethanol and glycerol correlate with tasters’ perceptions of alcohol and body, the mouthfeel sensation of fullness (Spearman’s rho=0.82/0.62 and 0.72/0.57 respectively) and darker color from roasted malts is a good indication of malt perception (Spearman’s rho=0.54).

Heatmap colors indicate Spearman’s Rho. Axes are organized according to sensory categories (aroma, taste, mouthfeel, overall), chemical categories and chemical sources in beer (malt (blue), hops (green), yeast (red), wild flora (yellow), Others (black)). See Supplementary Data  6 for all correlation values.

Interestingly, for some relationships between chemical compounds and perceived flavor, correlations are weaker than expected. For example, the rose-smelling phenethyl acetate only weakly correlates with floral aroma. This hints at more complex relationships and interactions between compounds and suggests a need for a more complex model than simple correlations. Lastly, we uncovered unexpected correlations. For instance, the esters ethyl decanoate and ethyl octanoate appear to correlate slightly with hop perception and bitterness, possibly due to their fruity flavor. Iron is anti-correlated with hop aromas and bitterness, most likely because it is also anti-correlated with iso-alpha acids. This could be a sign of metal chelation of hop acids 61 , given that our analyses measure unbound hop acids and total iron content, or could result from the higher iron content in dark and Fruit beers, which typically have less hoppy and bitter flavors 62 .

Public consumer reviews complement expert panel data

To complement and expand the sensory data of our trained tasting panel, we collected 180,000 reviews of our 250 beers from the online consumer review platform RateBeer. This provided numerical scores for beer appearance, aroma, taste, palate, overall quality as well as the average overall score.

Public datasets are known to suffer from biases, such as price, cult status and psychological conformity towards previous ratings of a product. For example, prices correlate with appreciation scores for these online consumer reviews (rho=0.49, Supplementary Fig.  S6 ), but not for our trained tasting panel (rho=0.19). This suggests that prices affect consumer appreciation, which has been reported in wine 63 , while blind tastings are unaffected. Moreover, we observe that some beer styles, like lagers and non-alcoholic beers, generally receive lower scores, reflecting that online reviewers are mostly beer aficionados with a preference for specialty beers over lager beers. In general, we find a modest correlation between our trained panel’s overall appreciation score and the online consumer appreciation scores (Fig.  3 , rho=0.29). Apart from the aforementioned biases in the online datasets, serving temperature, sample freshness and surroundings, which are all tightly controlled during the tasting panel sessions, can vary tremendously across online consumers and can further contribute to (among others, appreciation) differences between the two categories of tasters. Importantly, in contrast to the overall appreciation scores, for many sensory aspects the results from the professional panel correlated well with results obtained from RateBeer reviews. Correlations were highest for features that are relatively easy to recognize even for untrained tasters, like bitterness, sweetness, alcohol and malt aroma (Fig.  3 and below).

RateBeer text mining results can be found in Supplementary Data  7 . Rho values shown are Spearman correlation values, with asterisks indicating significant correlations ( p  < 0.05, two-sided). All p values were smaller than 0.001, except for Esters aroma (0.0553), Esters taste (0.3275), Esters aroma—banana (0.0019), Coriander (0.0508) and Diacetyl (0.0134).

Besides collecting consumer appreciation from these online reviews, we developed automated text analysis tools to gather additional data from review texts (Supplementary Data  7 ). Processing review texts on the RateBeer database yielded comparable results to the scores given by the trained panel for many common sensory aspects, including acidity, bitterness, sweetness, alcohol, malt, and hop tastes (Fig.  3 ). This is in line with what would be expected, since these attributes require less training for accurate assessment and are less influenced by environmental factors such as temperature, serving glass and odors in the environment. Consumer reviews also correlate well with our trained panel for 4-vinyl guaiacol, a compound associated with a very characteristic aroma. By contrast, correlations for more specific aromas like ester, coriander or diacetyl are underrepresented in the online reviews, underscoring the importance of using a trained tasting panel and standardized tasting sheets with explicit factors to be scored for evaluating specific aspects of a beer. Taken together, our results suggest that public reviews are trustworthy for some, but not all, flavor features and can complement or substitute taste panel data for these sensory aspects.

Models can predict beer sensory profiles from chemical data

The rich datasets of chemical analyses, tasting panel assessments and public reviews gathered in the first part of this study provided us with a unique opportunity to develop predictive models that link chemical data to sensorial features. Given the complexity of beer flavor, basic statistical tools such as correlations or linear regression may not always be the most suitable for making accurate predictions. Instead, we applied different machine learning models that can model both simple linear and complex interactive relationships. Specifically, we constructed a set of regression models to predict (a) trained panel scores for beer flavor and quality and (b) public reviews’ appreciation scores from beer chemical profiles. We trained and tested 10 different models (Methods), 3 linear regression-based models (simple linear regression with first-order interactions (LR), lasso regression with first-order interactions (Lasso), partial least squares regressor (PLSR)), 5 decision tree models (AdaBoost regressor (ABR), extra trees (ET), gradient boosting regressor (GBR), random forest (RF) and XGBoost regressor (XGBR)), 1 support vector regression (SVR), and 1 artificial neural network (ANN) model.

To compare the performance of our machine learning models, the dataset was randomly split into a training and test set, stratified by beer style. After a model was trained on data in the training set, its performance was evaluated on its ability to predict the test dataset obtained from multi-output models (based on the coefficient of determination, see Methods). Additionally, individual-attribute models were ranked per descriptor and the average rank was calculated, as proposed by Korneva et al. 64 . Importantly, both ways of evaluating the models’ performance agreed in general. Performance of the different models varied (Table  1 ). It should be noted that all models perform better at predicting RateBeer results than results from our trained tasting panel. One reason could be that sensory data is inherently variable, and this variability is averaged out with the large number of public reviews from RateBeer. Additionally, all tree-based models perform better at predicting taste than aroma. Linear models (LR) performed particularly poorly, with negative R 2 values, due to severe overfitting (training set R 2  = 1). Overfitting is a common issue in linear models with many parameters and limited samples, especially with interaction terms further amplifying the number of parameters. L1 regularization (Lasso) successfully overcomes this overfitting, out-competing multiple tree-based models on the RateBeer dataset. Similarly, the dimensionality reduction of PLSR avoids overfitting and improves performance, to some extent. Still, tree-based models (ABR, ET, GBR, RF and XGBR) show the best performance, out-competing the linear models (LR, Lasso, PLSR) commonly used in sensory science 65 .

GBR models showed the best overall performance in predicting sensory responses from chemical information, with R 2 values up to 0.75 depending on the predicted sensory feature (Supplementary Table  S4 ). The GBR models predict consumer appreciation (RateBeer) better than our trained panel’s appreciation (R 2 value of 0.67 compared to R 2 value of 0.09) (Supplementary Table  S3 and Supplementary Table  S4 ). ANN models showed intermediate performance, likely because neural networks typically perform best with larger datasets 66 . The SVR shows intermediate performance, mostly due to the weak predictions of specific attributes that lower the overall performance (Supplementary Table  S4 ).

Model dissection identifies specific, unexpected compounds as drivers of consumer appreciation

Next, we leveraged our models to infer important contributors to sensory perception and consumer appreciation. Consumer preference is a crucial sensory aspects, because a product that shows low consumer appreciation scores often does not succeed commercially 25 . Additionally, the requirement for a large number of representative evaluators makes consumer trials one of the more costly and time-consuming aspects of product development. Hence, a model for predicting chemical drivers of overall appreciation would be a welcome addition to the available toolbox for food development and optimization.

Since GBR models on our RateBeer dataset showed the best overall performance, we focused on these models. Specifically, we used two approaches to identify important contributors. First, rankings of the most important predictors for each sensorial trait in the GBR models were obtained based on impurity-based feature importance (mean decrease in impurity). High-ranked parameters were hypothesized to be either the true causal chemical properties underlying the trait, to correlate with the actual causal properties, or to take part in sensory interactions affecting the trait 67 (Fig.  4A ). In a second approach, we used SHAP 68 to determine which parameters contributed most to the model for making predictions of consumer appreciation (Fig.  4B ). SHAP calculates parameter contributions to model predictions on a per-sample basis, which can be aggregated into an importance score.

A The impurity-based feature importance (mean deviance in impurity, MDI) calculated from the Gradient Boosting Regression (GBR) model predicting RateBeer appreciation scores. The top 15 highest ranked chemical properties are shown. B SHAP summary plot for the top 15 parameters contributing to our GBR model. Each point on the graph represents a sample from our dataset. The color represents the concentration of that parameter, with bluer colors representing low values and redder colors representing higher values. Greater absolute values on the horizontal axis indicate a higher impact of the parameter on the prediction of the model. C Spearman correlations between the 15 most important chemical properties and consumer overall appreciation. Numbers indicate the Spearman Rho correlation coefficient, and the rank of this correlation compared to all other correlations. The top 15 important compounds were determined using SHAP (panel B).

Both approaches identified ethyl acetate as the most predictive parameter for beer appreciation (Fig.  4 ). Ethyl acetate is the most abundant ester in beer with a typical ‘fruity’, ‘solvent’ and ‘alcoholic’ flavor, but is often considered less important than other esters like isoamyl acetate. The second most important parameter identified by SHAP is ethanol, the most abundant beer compound after water. Apart from directly contributing to beer flavor and mouthfeel, ethanol drastically influences the physical properties of beer, dictating how easily volatile compounds escape the beer matrix to contribute to beer aroma 69 . Importantly, it should also be noted that the importance of ethanol for appreciation is likely inflated by the very low appreciation scores of non-alcoholic beers (Supplementary Fig.  S4 ). Despite not often being considered a driver of beer appreciation, protein level also ranks highly in both approaches, possibly due to its effect on mouthfeel and body 70 . Lactic acid, which contributes to the tart taste of sour beers, is the fourth most important parameter identified by SHAP, possibly due to the generally high appreciation of sour beers in our dataset.

Interestingly, some of the most important predictive parameters for our model are not well-established as beer flavors or are even commonly regarded as being negative for beer quality. For example, our models identify methanethiol and ethyl phenyl acetate, an ester commonly linked to beer staling 71 , as a key factor contributing to beer appreciation. Although there is no doubt that high concentrations of these compounds are considered unpleasant, the positive effects of modest concentrations are not yet known 72 , 73 .

To compare our approach to conventional statistics, we evaluated how well the 15 most important SHAP-derived parameters correlate with consumer appreciation (Fig.  4C ). Interestingly, only 6 of the properties derived by SHAP rank amongst the top 15 most correlated parameters. For some chemical compounds, the correlations are so low that they would have likely been considered unimportant. For example, lactic acid, the fourth most important parameter, shows a bimodal distribution for appreciation, with sour beers forming a separate cluster, that is missed entirely by the Spearman correlation. Additionally, the correlation plots reveal outliers, emphasizing the need for robust analysis tools. Together, this highlights the need for alternative models, like the Gradient Boosting model, that better grasp the complexity of (beer) flavor.

Finally, to observe the relationships between these chemical properties and their predicted targets, partial dependence plots were constructed for the six most important predictors of consumer appreciation 74 , 75 , 76 (Supplementary Fig.  S7 ). One-way partial dependence plots show how a change in concentration affects the predicted appreciation. These plots reveal an important limitation of our models: appreciation predictions remain constant at ever-increasing concentrations. This implies that once a threshold concentration is reached, further increasing the concentration does not affect appreciation. This is false, as it is well-documented that certain compounds become unpleasant at high concentrations, including ethyl acetate (‘nail polish’) 77 and methanethiol (‘sulfury’ and ‘rotten cabbage’) 78 . The inability of our models to grasp that flavor compounds have optimal levels, above which they become negative, is a consequence of working with commercial beer brands where (off-)flavors are rarely too high to negatively impact the product. The two-way partial dependence plots show how changing the concentration of two compounds influences predicted appreciation, visualizing their interactions (Supplementary Fig.  S7 ). In our case, the top 5 parameters are dominated by additive or synergistic interactions, with high concentrations for both compounds resulting in the highest predicted appreciation.

To assess the robustness of our best-performing models and model predictions, we performed 100 iterations of the GBR, RF and ET models. In general, all iterations of the models yielded similar performance (Supplementary Fig.  S8 ). Moreover, the main predictors (including the top predictors ethanol and ethyl acetate) remained virtually the same, especially for GBR and RF. For the iterations of the ET model, we did observe more variation in the top predictors, which is likely a consequence of the model’s inherent random architecture in combination with co-correlations between certain predictors. However, even in this case, several of the top predictors (ethanol and ethyl acetate) remain unchanged, although their rank in importance changes (Supplementary Fig.  S8 ).

Next, we investigated if a combination of RateBeer and trained panel data into one consolidated dataset would lead to stronger models, under the hypothesis that such a model would suffer less from bias in the datasets. A GBR model was trained to predict appreciation on the combined dataset. This model underperformed compared to the RateBeer model, both in the native case and when including a dataset identifier (R 2  = 0.67, 0.26 and 0.42 respectively). For the latter, the dataset identifier is the most important feature (Supplementary Fig.  S9 ), while most of the feature importance remains unchanged, with ethyl acetate and ethanol ranking highest, like in the original model trained only on RateBeer data. It seems that the large variation in the panel dataset introduces noise, weakening the models’ performances and reliability. In addition, it seems reasonable to assume that both datasets are fundamentally different, with the panel dataset obtained by blind tastings by a trained professional panel.

Lastly, we evaluated whether beer style identifiers would further enhance the model’s performance. A GBR model was trained with parameters that explicitly encoded the styles of the samples. This did not improve model performance (R2 = 0.66 with style information vs R2 = 0.67). The most important chemical features are consistent with the model trained without style information (eg. ethanol and ethyl acetate), and with the exception of the most preferred (strong ale) and least preferred (low/no-alcohol) styles, none of the styles were among the most important features (Supplementary Fig.  S9 , Supplementary Table  S5 and S6 ). This is likely due to a combination of style-specific chemical signatures, such as iso-alpha acids and lactic acid, that implicitly convey style information to the original models, as well as the low number of samples belonging to some styles, making it difficult for the model to learn style-specific patterns. Moreover, beer styles are not rigorously defined, with some styles overlapping in features and some beers being misattributed to a specific style, all of which leads to more noise in models that use style parameters.

Model validation

To test if our predictive models give insight into beer appreciation, we set up experiments aimed at improving existing commercial beers. We specifically selected overall appreciation as the trait to be examined because of its complexity and commercial relevance. Beer flavor comprises a complex bouquet rather than single aromas and tastes 53 . Hence, adding a single compound to the extent that a difference is noticeable may lead to an unbalanced, artificial flavor. Therefore, we evaluated the effect of combinations of compounds. Because Blond beers represent the most extensive style in our dataset, we selected a beer from this style as the starting material for these experiments (Beer 64 in Supplementary Data  1 ).

In the first set of experiments, we adjusted the concentrations of compounds that made up the most important predictors of overall appreciation (ethyl acetate, ethanol, lactic acid, ethyl phenyl acetate) together with correlated compounds (ethyl hexanoate, isoamyl acetate, glycerol), bringing them up to 95 th percentile ethanol-normalized concentrations (Methods) within the Blond group (‘Spiked’ concentration in Fig.  5A ). Compared to controls, the spiked beers were found to have significantly improved overall appreciation among trained panelists, with panelist noting increased intensity of ester flavors, sweetness, alcohol, and body fullness (Fig.  5B ). To disentangle the contribution of ethanol to these results, a second experiment was performed without the addition of ethanol. This resulted in a similar outcome, including increased perception of alcohol and overall appreciation.

Adding the top chemical compounds, identified as best predictors of appreciation by our model, into poorly appreciated beers results in increased appreciation from our trained panel. Results of sensory tests between base beers and those spiked with compounds identified as the best predictors by the model. A Blond and Non/Low-alcohol (0.0% ABV) base beers were brought up to 95th-percentile ethanol-normalized concentrations within each style. B For each sensory attribute, tasters indicated the more intense sample and selected the sample they preferred. The numbers above the bars correspond to the p values that indicate significant changes in perceived flavor (two-sided binomial test: alpha 0.05, n  = 20 or 13).

In a last experiment, we tested whether using the model’s predictions can boost the appreciation of a non-alcoholic beer (beer 223 in Supplementary Data  1 ). Again, the addition of a mixture of predicted compounds (omitting ethanol, in this case) resulted in a significant increase in appreciation, body, ester flavor and sweetness.

Predicting flavor and consumer appreciation from chemical composition is one of the ultimate goals of sensory science. A reliable, systematic and unbiased way to link chemical profiles to flavor and food appreciation would be a significant asset to the food and beverage industry. Such tools would substantially aid in quality control and recipe development, offer an efficient and cost-effective alternative to pilot studies and consumer trials and would ultimately allow food manufacturers to produce superior, tailor-made products that better meet the demands of specific consumer groups more efficiently.

A limited set of studies have previously tried, to varying degrees of success, to predict beer flavor and beer popularity based on (a limited set of) chemical compounds and flavors 79 , 80 . Current sensitive, high-throughput technologies allow measuring an unprecedented number of chemical compounds and properties in a large set of samples, yielding a dataset that can train models that help close the gaps between chemistry and flavor, even for a complex natural product like beer. To our knowledge, no previous research gathered data at this scale (250 samples, 226 chemical parameters, 50 sensory attributes and 5 consumer scores) to disentangle and validate the chemical aspects driving beer preference using various machine-learning techniques. We find that modern machine learning models outperform conventional statistical tools, such as correlations and linear models, and can successfully predict flavor appreciation from chemical composition. This could be attributed to the natural incorporation of interactions and non-linear or discontinuous effects in machine learning models, which are not easily grasped by the linear model architecture. While linear models and partial least squares regression represent the most widespread statistical approaches in sensory science, in part because they allow interpretation 65 , 81 , 82 , modern machine learning methods allow for building better predictive models while preserving the possibility to dissect and exploit the underlying patterns. Of the 10 different models we trained, tree-based models, such as our best performing GBR, showed the best overall performance in predicting sensory responses from chemical information, outcompeting artificial neural networks. This agrees with previous reports for models trained on tabular data 83 . Our results are in line with the findings of Colantonio et al. who also identified the gradient boosting architecture as performing best at predicting appreciation and flavor (of tomatoes and blueberries, in their specific study) 26 . Importantly, besides our larger experimental scale, we were able to directly confirm our models’ predictions in vivo.

Our study confirms that flavor compound concentration does not always correlate with perception, suggesting complex interactions that are often missed by more conventional statistics and simple models. Specifically, we find that tree-based algorithms may perform best in developing models that link complex food chemistry with aroma. Furthermore, we show that massive datasets of untrained consumer reviews provide a valuable source of data, that can complement or even replace trained tasting panels, especially for appreciation and basic flavors, such as sweetness and bitterness. This holds despite biases that are known to occur in such datasets, such as price or conformity bias. Moreover, GBR models predict taste better than aroma. This is likely because taste (e.g. bitterness) often directly relates to the corresponding chemical measurements (e.g., iso-alpha acids), whereas such a link is less clear for aromas, which often result from the interplay between multiple volatile compounds. We also find that our models are best at predicting acidity and alcohol, likely because there is a direct relation between the measured chemical compounds (acids and ethanol) and the corresponding perceived sensorial attribute (acidity and alcohol), and because even untrained consumers are generally able to recognize these flavors and aromas.

The predictions of our final models, trained on review data, hold even for blind tastings with small groups of trained tasters, as demonstrated by our ability to validate specific compounds as drivers of beer flavor and appreciation. Since adding a single compound to the extent of a noticeable difference may result in an unbalanced flavor profile, we specifically tested our identified key drivers as a combination of compounds. While this approach does not allow us to validate if a particular single compound would affect flavor and/or appreciation, our experiments do show that this combination of compounds increases consumer appreciation.

It is important to stress that, while it represents an important step forward, our approach still has several major limitations. A key weakness of the GBR model architecture is that amongst co-correlating variables, the largest main effect is consistently preferred for model building. As a result, co-correlating variables often have artificially low importance scores, both for impurity and SHAP-based methods, like we observed in the comparison to the more randomized Extra Trees models. This implies that chemicals identified as key drivers of a specific sensory feature by GBR might not be the true causative compounds, but rather co-correlate with the actual causative chemical. For example, the high importance of ethyl acetate could be (partially) attributed to the total ester content, ethanol or ethyl hexanoate (rho=0.77, rho=0.72 and rho=0.68), while ethyl phenylacetate could hide the importance of prenyl isobutyrate and ethyl benzoate (rho=0.77 and rho=0.76). Expanding our GBR model to include beer style as a parameter did not yield additional power or insight. This is likely due to style-specific chemical signatures, such as iso-alpha acids and lactic acid, that implicitly convey style information to the original model, as well as the smaller sample size per style, limiting the power to uncover style-specific patterns. This can be partly attributed to the curse of dimensionality, where the high number of parameters results in the models mainly incorporating single parameter effects, rather than complex interactions such as style-dependent effects 67 . A larger number of samples may overcome some of these limitations and offer more insight into style-specific effects. On the other hand, beer style is not a rigid scientific classification, and beers within one style often differ a lot, which further complicates the analysis of style as a model factor.

Our study is limited to beers from Belgian breweries. Although these beers cover a large portion of the beer styles available globally, some beer styles and consumer patterns may be missing, while other features might be overrepresented. For example, many Belgian ales exhibit yeast-driven flavor profiles, which is reflected in the chemical drivers of appreciation discovered by this study. In future work, expanding the scope to include diverse markets and beer styles could lead to the identification of even more drivers of appreciation and better models for special niche products that were not present in our beer set.

In addition to inherent limitations of GBR models, there are also some limitations associated with studying food aroma. Even if our chemical analyses measured most of the known aroma compounds, the total number of flavor compounds in complex foods like beer is still larger than the subset we were able to measure in this study. For example, hop-derived thiols, that influence flavor at very low concentrations, are notoriously difficult to measure in a high-throughput experiment. Moreover, consumer perception remains subjective and prone to biases that are difficult to avoid. It is also important to stress that the models are still immature and that more extensive datasets will be crucial for developing more complete models in the future. Besides more samples and parameters, our dataset does not include any demographic information about the tasters. Including such data could lead to better models that grasp external factors like age and culture. Another limitation is that our set of beers consists of high-quality end-products and lacks beers that are unfit for sale, which limits the current model in accurately predicting products that are appreciated very badly. Finally, while models could be readily applied in quality control, their use in sensory science and product development is restrained by their inability to discern causal relationships. Given that the models cannot distinguish compounds that genuinely drive consumer perception from those that merely correlate, validation experiments are essential to identify true causative compounds.

Despite the inherent limitations, dissection of our models enabled us to pinpoint specific molecules as potential drivers of beer aroma and consumer appreciation, including compounds that were unexpected and would not have been identified using standard approaches. Important drivers of beer appreciation uncovered by our models include protein levels, ethyl acetate, ethyl phenyl acetate and lactic acid. Currently, many brewers already use lactic acid to acidify their brewing water and ensure optimal pH for enzymatic activity during the mashing process. Our results suggest that adding lactic acid can also improve beer appreciation, although its individual effect remains to be tested. Interestingly, ethanol appears to be unnecessary to improve beer appreciation, both for blond beer and alcohol-free beer. Given the growing consumer interest in alcohol-free beer, with a predicted annual market growth of >7% 84 , it is relevant for brewers to know what compounds can further increase consumer appreciation of these beers. Hence, our model may readily provide avenues to further improve the flavor and consumer appreciation of both alcoholic and non-alcoholic beers, which is generally considered one of the key challenges for future beer production.

Whereas we see a direct implementation of our results for the development of superior alcohol-free beverages and other food products, our study can also serve as a stepping stone for the development of novel alcohol-containing beverages. We want to echo the growing body of scientific evidence for the negative effects of alcohol consumption, both on the individual level by the mutagenic, teratogenic and carcinogenic effects of ethanol 85 , 86 , as well as the burden on society caused by alcohol abuse and addiction. We encourage the use of our results for the production of healthier, tastier products, including novel and improved beverages with lower alcohol contents. Furthermore, we strongly discourage the use of these technologies to improve the appreciation or addictive properties of harmful substances.

The present work demonstrates that despite some important remaining hurdles, combining the latest developments in chemical analyses, sensory analysis and modern machine learning methods offers exciting avenues for food chemistry and engineering. Soon, these tools may provide solutions in quality control and recipe development, as well as new approaches to sensory science and flavor research.

Beer selection

250 commercial Belgian beers were selected to cover the broad diversity of beer styles and corresponding diversity in chemical composition and aroma. See Supplementary Fig.  S1 .

Chemical dataset

Sample preparation.

Beers within their expiration date were purchased from commercial retailers. Samples were prepared in biological duplicates at room temperature, unless explicitly stated otherwise. Bottle pressure was measured with a manual pressure device (Steinfurth Mess-Systeme GmbH) and used to calculate CO 2 concentration. The beer was poured through two filter papers (Macherey-Nagel, 500713032 MN 713 ¼) to remove carbon dioxide and prevent spontaneous foaming. Samples were then prepared for measurements by targeted Headspace-Gas Chromatography-Flame Ionization Detector/Flame Photometric Detector (HS-GC-FID/FPD), Headspace-Solid Phase Microextraction-Gas Chromatography-Mass Spectrometry (HS-SPME-GC-MS), colorimetric analysis, enzymatic analysis, Near-Infrared (NIR) analysis, as described in the sections below. The mean values of biological duplicates are reported for each compound.

HS-GC-FID/FPD

HS-GC-FID/FPD (Shimadzu GC 2010 Plus) was used to measure higher alcohols, acetaldehyde, esters, 4-vinyl guaicol, and sulfur compounds. Each measurement comprised 5 ml of sample pipetted into a 20 ml glass vial containing 1.75 g NaCl (VWR, 27810.295). 100 µl of 2-heptanol (Sigma-Aldrich, H3003) (internal standard) solution in ethanol (Fisher Chemical, E/0650DF/C17) was added for a final concentration of 2.44 mg/L. Samples were flushed with nitrogen for 10 s, sealed with a silicone septum, stored at −80 °C and analyzed in batches of 20.

The GC was equipped with a DB-WAXetr column (length, 30 m; internal diameter, 0.32 mm; layer thickness, 0.50 µm; Agilent Technologies, Santa Clara, CA, USA) to the FID and an HP-5 column (length, 30 m; internal diameter, 0.25 mm; layer thickness, 0.25 µm; Agilent Technologies, Santa Clara, CA, USA) to the FPD. N 2 was used as the carrier gas. Samples were incubated for 20 min at 70 °C in the headspace autosampler (Flow rate, 35 cm/s; Injection volume, 1000 µL; Injection mode, split; Combi PAL autosampler, CTC analytics, Switzerland). The injector, FID and FPD temperatures were kept at 250 °C. The GC oven temperature was first held at 50 °C for 5 min and then allowed to rise to 80 °C at a rate of 5 °C/min, followed by a second ramp of 4 °C/min until 200 °C kept for 3 min and a final ramp of (4 °C/min) until 230 °C for 1 min. Results were analyzed with the GCSolution software version 2.4 (Shimadzu, Kyoto, Japan). The GC was calibrated with a 5% EtOH solution (VWR International) containing the volatiles under study (Supplementary Table  S7 ).

HS-SPME-GC-MS

HS-SPME-GC-MS (Shimadzu GCMS-QP-2010 Ultra) was used to measure additional volatile compounds, mainly comprising terpenoids and esters. Samples were analyzed by HS-SPME using a triphase DVB/Carboxen/PDMS 50/30 μm SPME fiber (Supelco Co., Bellefonte, PA, USA) followed by gas chromatography (Thermo Fisher Scientific Trace 1300 series, USA) coupled to a mass spectrometer (Thermo Fisher Scientific ISQ series MS) equipped with a TriPlus RSH autosampler. 5 ml of degassed beer sample was placed in 20 ml vials containing 1.75 g NaCl (VWR, 27810.295). 5 µl internal standard mix was added, containing 2-heptanol (1 g/L) (Sigma-Aldrich, H3003), 4-fluorobenzaldehyde (1 g/L) (Sigma-Aldrich, 128376), 2,3-hexanedione (1 g/L) (Sigma-Aldrich, 144169) and guaiacol (1 g/L) (Sigma-Aldrich, W253200) in ethanol (Fisher Chemical, E/0650DF/C17). Each sample was incubated at 60 °C in the autosampler oven with constant agitation. After 5 min equilibration, the SPME fiber was exposed to the sample headspace for 30 min. The compounds trapped on the fiber were thermally desorbed in the injection port of the chromatograph by heating the fiber for 15 min at 270 °C.

The GC-MS was equipped with a low polarity RXi-5Sil MS column (length, 20 m; internal diameter, 0.18 mm; layer thickness, 0.18 µm; Restek, Bellefonte, PA, USA). Injection was performed in splitless mode at 320 °C, a split flow of 9 ml/min, a purge flow of 5 ml/min and an open valve time of 3 min. To obtain a pulsed injection, a programmed gas flow was used whereby the helium gas flow was set at 2.7 mL/min for 0.1 min, followed by a decrease in flow of 20 ml/min to the normal 0.9 mL/min. The temperature was first held at 30 °C for 3 min and then allowed to rise to 80 °C at a rate of 7 °C/min, followed by a second ramp of 2 °C/min till 125 °C and a final ramp of 8 °C/min with a final temperature of 270 °C.

Mass acquisition range was 33 to 550 amu at a scan rate of 5 scans/s. Electron impact ionization energy was 70 eV. The interface and ion source were kept at 275 °C and 250 °C, respectively. A mix of linear n-alkanes (from C7 to C40, Supelco Co.) was injected into the GC-MS under identical conditions to serve as external retention index markers. Identification and quantification of the compounds were performed using an in-house developed R script as described in Goelen et al. and Reher et al. 87 , 88 (for package information, see Supplementary Table  S8 ). Briefly, chromatograms were analyzed using AMDIS (v2.71) 89 to separate overlapping peaks and obtain pure compound spectra. The NIST MS Search software (v2.0 g) in combination with the NIST2017, FFNSC3 and Adams4 libraries were used to manually identify the empirical spectra, taking into account the expected retention time. After background subtraction and correcting for retention time shifts between samples run on different days based on alkane ladders, compound elution profiles were extracted and integrated using a file with 284 target compounds of interest, which were either recovered in our identified AMDIS list of spectra or were known to occur in beer. Compound elution profiles were estimated for every peak in every chromatogram over a time-restricted window using weighted non-negative least square analysis after which peak areas were integrated 87 , 88 . Batch effect correction was performed by normalizing against the most stable internal standard compound, 4-fluorobenzaldehyde. Out of all 284 target compounds that were analyzed, 167 were visually judged to have reliable elution profiles and were used for final analysis.

Discrete photometric and enzymatic analysis

Discrete photometric and enzymatic analysis (Thermo Scientific TM Gallery TM Plus Beermaster Discrete Analyzer) was used to measure acetic acid, ammonia, beta-glucan, iso-alpha acids, color, sugars, glycerol, iron, pH, protein, and sulfite. 2 ml of sample volume was used for the analyses. Information regarding the reagents and standard solutions used for analyses and calibrations is included in Supplementary Table  S7 and Supplementary Table  S9 .

NIR analyses

NIR analysis (Anton Paar Alcolyzer Beer ME System) was used to measure ethanol. Measurements comprised 50 ml of sample, and a 10% EtOH solution was used for calibration.

Correlation calculations

Pairwise Spearman Rank correlations were calculated between all chemical properties.

Sensory dataset

Trained panel.

Our trained tasting panel consisted of volunteers who gave prior verbal informed consent. All compounds used for the validation experiment were of food-grade quality. The tasting sessions were approved by the Social and Societal Ethics Committee of the KU Leuven (G-2022-5677-R2(MAR)). All online reviewers agreed to the Terms and Conditions of the RateBeer website.

Sensory analysis was performed according to the American Society of Brewing Chemists (ASBC) Sensory Analysis Methods 90 . 30 volunteers were screened through a series of triangle tests. The sixteen most sensitive and consistent tasters were retained as taste panel members. The resulting panel was diverse in age [22–42, mean: 29], sex [56% male] and nationality [7 different countries]. The panel developed a consensus vocabulary to describe beer aroma, taste and mouthfeel. Panelists were trained to identify and score 50 different attributes, using a 7-point scale to rate attributes’ intensity. The scoring sheet is included as Supplementary Data  3 . Sensory assessments took place between 10–12 a.m. The beers were served in black-colored glasses. Per session, between 5 and 12 beers of the same style were tasted at 12 °C to 16 °C. Two reference beers were added to each set and indicated as ‘Reference 1 & 2’, allowing panel members to calibrate their ratings. Not all panelists were present at every tasting. Scores were scaled by standard deviation and mean-centered per taster. Values are represented as z-scores and clustered by Euclidean distance. Pairwise Spearman correlations were calculated between taste and aroma sensory attributes. Panel consistency was evaluated by repeating samples on different sessions and performing ANOVA to identify differences, using the ‘stats’ package (v4.2.2) in R (for package information, see Supplementary Table  S8 ).

Online reviews from a public database

The ‘scrapy’ package in Python (v3.6) (for package information, see Supplementary Table  S8 ). was used to collect 232,288 online reviews (mean=922, min=6, max=5343) from RateBeer, an online beer review database. Each review entry comprised 5 numerical scores (appearance, aroma, taste, palate and overall quality) and an optional review text. The total number of reviews per reviewer was collected separately. Numerical scores were scaled and centered per rater, and mean scores were calculated per beer.

For the review texts, the language was estimated using the packages ‘langdetect’ and ‘langid’ in Python. Reviews that were classified as English by both packages were kept. Reviewers with fewer than 100 entries overall were discarded. 181,025 reviews from >6000 reviewers from >40 countries remained. Text processing was done using the ‘nltk’ package in Python. Texts were corrected for slang and misspellings; proper nouns and rare words that are relevant to the beer context were specified and kept as-is (‘Chimay’,’Lambic’, etc.). A dictionary of semantically similar sensorial terms, for example ‘floral’ and ‘flower’, was created and collapsed together into one term. Words were stemmed and lemmatized to avoid identifying words such as ‘acid’ and ‘acidity’ as separate terms. Numbers and punctuation were removed.

Sentences from up to 50 randomly chosen reviews per beer were manually categorized according to the aspect of beer they describe (appearance, aroma, taste, palate, overall quality—not to be confused with the 5 numerical scores described above) or flagged as irrelevant if they contained no useful information. If a beer contained fewer than 50 reviews, all reviews were manually classified. This labeled data set was used to train a model that classified the rest of the sentences for all beers 91 . Sentences describing taste and aroma were extracted, and term frequency–inverse document frequency (TFIDF) was implemented to calculate enrichment scores for sensorial words per beer.

The sex of the tasting subject was not considered when building our sensory database. Instead, results from different panelists were averaged, both for our trained panel (56% male, 44% female) and the RateBeer reviews (70% male, 30% female for RateBeer as a whole).

Beer price collection and processing

Beer prices were collected from the following stores: Colruyt, Delhaize, Total Wine, BeerHawk, The Belgian Beer Shop, The Belgian Shop, and Beer of Belgium. Where applicable, prices were converted to Euros and normalized per liter. Spearman correlations were calculated between these prices and mean overall appreciation scores from RateBeer and the taste panel, respectively.

Pairwise Spearman Rank correlations were calculated between all sensory properties.

Machine learning models

Predictive modeling of sensory profiles from chemical data.

Regression models were constructed to predict (a) trained panel scores for beer flavors and quality from beer chemical profiles and (b) public reviews’ appreciation scores from beer chemical profiles. Z-scores were used to represent sensory attributes in both data sets. Chemical properties with log-normal distributions (Shapiro-Wilk test, p  <  0.05 ) were log-transformed. Missing chemical measurements (0.1% of all data) were replaced with mean values per attribute. Observations from 250 beers were randomly separated into a training set (70%, 175 beers) and a test set (30%, 75 beers), stratified per beer style. Chemical measurements (p = 231) were normalized based on the training set average and standard deviation. In total, three linear regression-based models: linear regression with first-order interaction terms (LR), lasso regression with first-order interaction terms (Lasso) and partial least squares regression (PLSR); five decision tree models, Adaboost regressor (ABR), Extra Trees (ET), Gradient Boosting regressor (GBR), Random Forest (RF) and XGBoost regressor (XGBR); one support vector machine model (SVR) and one artificial neural network model (ANN) were trained. The models were implemented using the ‘scikit-learn’ package (v1.2.2) and ‘xgboost’ package (v1.7.3) in Python (v3.9.16). Models were trained, and hyperparameters optimized, using five-fold cross-validated grid search with the coefficient of determination (R 2 ) as the evaluation metric. The ANN (scikit-learn’s MLPRegressor) was optimized using Bayesian Tree-Structured Parzen Estimator optimization with the ‘Optuna’ Python package (v3.2.0). Individual models were trained per attribute, and a multi-output model was trained on all attributes simultaneously.

Model dissection

GBR was found to outperform other methods, resulting in models with the highest average R 2 values in both trained panel and public review data sets. Impurity-based rankings of the most important predictors for each predicted sensorial trait were obtained using the ‘scikit-learn’ package. To observe the relationships between these chemical properties and their predicted targets, partial dependence plots (PDP) were constructed for the six most important predictors of consumer appreciation 74 , 75 .

The ‘SHAP’ package in Python (v0.41.0) was implemented to provide an alternative ranking of predictor importance and to visualize the predictors’ effects as a function of their concentration 68 .

Validation of causal chemical properties

To validate the effects of the most important model features on predicted sensory attributes, beers were spiked with the chemical compounds identified by the models and descriptive sensory analyses were carried out according to the American Society of Brewing Chemists (ASBC) protocol 90 .

Compound spiking was done 30 min before tasting. Compounds were spiked into fresh beer bottles, that were immediately resealed and inverted three times. Fresh bottles of beer were opened for the same duration, resealed, and inverted thrice, to serve as controls. Pairs of spiked samples and controls were served simultaneously, chilled and in dark glasses as outlined in the Trained panel section above. Tasters were instructed to select the glass with the higher flavor intensity for each attribute (directional difference test 92 ) and to select the glass they prefer.

The final concentration after spiking was equal to the within-style average, after normalizing by ethanol concentration. This was done to ensure balanced flavor profiles in the final spiked beer. The same methods were applied to improve a non-alcoholic beer. Compounds were the following: ethyl acetate (Merck KGaA, W241415), ethyl hexanoate (Merck KGaA, W243906), isoamyl acetate (Merck KGaA, W205508), phenethyl acetate (Merck KGaA, W285706), ethanol (96%, Colruyt), glycerol (Merck KGaA, W252506), lactic acid (Merck KGaA, 261106).

Significant differences in preference or perceived intensity were determined by performing the two-sided binomial test on each attribute.

Reporting summary

Further information on research design is available in the  Nature Portfolio Reporting Summary linked to this article.

Data availability

The data that support the findings of this work are available in the Supplementary Data files and have been deposited to Zenodo under accession code 10653704 93 . The RateBeer scores data are under restricted access, they are not publicly available as they are property of RateBeer (ZX Ventures, USA). Access can be obtained from the authors upon reasonable request and with permission of RateBeer (ZX Ventures, USA).  Source data are provided with this paper.

Code availability

The code for training the machine learning models, analyzing the models, and generating the figures has been deposited to Zenodo under accession code 10653704 93 .

Tieman, D. et al. A chemical genetic roadmap to improved tomato flavor. Science 355 , 391–394 (2017).

Article   ADS   CAS   PubMed   Google Scholar  

Plutowska, B. & Wardencki, W. Application of gas chromatography–olfactometry (GC–O) in analysis and quality assessment of alcoholic beverages – A review. Food Chem. 107 , 449–463 (2008).

Article   CAS   Google Scholar  

Legin, A., Rudnitskaya, A., Seleznev, B. & Vlasov, Y. Electronic tongue for quality assessment of ethanol, vodka and eau-de-vie. Anal. Chim. Acta 534 , 129–135 (2005).

Loutfi, A., Coradeschi, S., Mani, G. K., Shankar, P. & Rayappan, J. B. B. Electronic noses for food quality: A review. J. Food Eng. 144 , 103–111 (2015).

Ahn, Y.-Y., Ahnert, S. E., Bagrow, J. P. & Barabási, A.-L. Flavor network and the principles of food pairing. Sci. Rep. 1 , 196 (2011).

Article   CAS   PubMed   PubMed Central   Google Scholar  

Bartoshuk, L. M. & Klee, H. J. Better fruits and vegetables through sensory analysis. Curr. Biol. 23 , R374–R378 (2013).

Article   CAS   PubMed   Google Scholar  

Piggott, J. R. Design questions in sensory and consumer science. Food Qual. Prefer. 3293 , 217–220 (1995).

Article   Google Scholar  

Kermit, M. & Lengard, V. Assessing the performance of a sensory panel-panellist monitoring and tracking. J. Chemom. 19 , 154–161 (2005).

Cook, D. J., Hollowood, T. A., Linforth, R. S. T. & Taylor, A. J. Correlating instrumental measurements of texture and flavour release with human perception. Int. J. Food Sci. Technol. 40 , 631–641 (2005).

Chinchanachokchai, S., Thontirawong, P. & Chinchanachokchai, P. A tale of two recommender systems: The moderating role of consumer expertise on artificial intelligence based product recommendations. J. Retail. Consum. Serv. 61 , 1–12 (2021).

Ross, C. F. Sensory science at the human-machine interface. Trends Food Sci. Technol. 20 , 63–72 (2009).

Chambers, E. IV & Koppel, K. Associations of volatile compounds with sensory aroma and flavor: The complex nature of flavor. Molecules 18 , 4887–4905 (2013).

Pinu, F. R. Metabolomics—The new frontier in food safety and quality research. Food Res. Int. 72 , 80–81 (2015).

Danezis, G. P., Tsagkaris, A. S., Brusic, V. & Georgiou, C. A. Food authentication: state of the art and prospects. Curr. Opin. Food Sci. 10 , 22–31 (2016).

Shepherd, G. M. Smell images and the flavour system in the human brain. Nature 444 , 316–321 (2006).

Meilgaard, M. C. Prediction of flavor differences between beers from their chemical composition. J. Agric. Food Chem. 30 , 1009–1017 (1982).

Xu, L. et al. Widespread receptor-driven modulation in peripheral olfactory coding. Science 368 , eaaz5390 (2020).

Kupferschmidt, K. Following the flavor. Science 340 , 808–809 (2013).

Billesbølle, C. B. et al. Structural basis of odorant recognition by a human odorant receptor. Nature 615 , 742–749 (2023).

Article   ADS   PubMed   PubMed Central   Google Scholar  

Smith, B. Perspective: Complexities of flavour. Nature 486 , S6–S6 (2012).

Pfister, P. et al. Odorant receptor inhibition is fundamental to odor encoding. Curr. Biol. 30 , 2574–2587 (2020).

Moskowitz, H. W., Kumaraiah, V., Sharma, K. N., Jacobs, H. L. & Sharma, S. D. Cross-cultural differences in simple taste preferences. Science 190 , 1217–1218 (1975).

Eriksson, N. et al. A genetic variant near olfactory receptor genes influences cilantro preference. Flavour 1 , 22 (2012).

Ferdenzi, C. et al. Variability of affective responses to odors: Culture, gender, and olfactory knowledge. Chem. Senses 38 , 175–186 (2013).

Article   PubMed   Google Scholar  

Lawless, H. T. & Heymann, H. Sensory evaluation of food: Principles and practices. (Springer, New York, NY). https://doi.org/10.1007/978-1-4419-6488-5 (2010).

Colantonio, V. et al. Metabolomic selection for enhanced fruit flavor. Proc. Natl. Acad. Sci. 119 , e2115865119 (2022).

Fritz, F., Preissner, R. & Banerjee, P. VirtualTaste: a web server for the prediction of organoleptic properties of chemical compounds. Nucleic Acids Res 49 , W679–W684 (2021).

Tuwani, R., Wadhwa, S. & Bagler, G. BitterSweet: Building machine learning models for predicting the bitter and sweet taste of small molecules. Sci. Rep. 9 , 1–13 (2019).

Dagan-Wiener, A. et al. Bitter or not? BitterPredict, a tool for predicting taste from chemical structure. Sci. Rep. 7 , 1–13 (2017).

Pallante, L. et al. Toward a general and interpretable umami taste predictor using a multi-objective machine learning approach. Sci. Rep. 12 , 1–11 (2022).

Malavolta, M. et al. A survey on computational taste predictors. Eur. Food Res. Technol. 248 , 2215–2235 (2022).

Lee, B. K. et al. A principal odor map unifies diverse tasks in olfactory perception. Science 381 , 999–1006 (2023).

Mayhew, E. J. et al. Transport features predict if a molecule is odorous. Proc. Natl. Acad. Sci. 119 , e2116576119 (2022).

Niu, Y. et al. Sensory evaluation of the synergism among ester odorants in light aroma-type liquor by odor threshold, aroma intensity and flash GC electronic nose. Food Res. Int. 113 , 102–114 (2018).

Yu, P., Low, M. Y. & Zhou, W. Design of experiments and regression modelling in food flavour and sensory analysis: A review. Trends Food Sci. Technol. 71 , 202–215 (2018).

Oladokun, O. et al. The impact of hop bitter acid and polyphenol profiles on the perceived bitterness of beer. Food Chem. 205 , 212–220 (2016).

Linforth, R., Cabannes, M., Hewson, L., Yang, N. & Taylor, A. Effect of fat content on flavor delivery during consumption: An in vivo model. J. Agric. Food Chem. 58 , 6905–6911 (2010).

Guo, S., Na Jom, K. & Ge, Y. Influence of roasting condition on flavor profile of sunflower seeds: A flavoromics approach. Sci. Rep. 9 , 11295 (2019).

Ren, Q. et al. The changes of microbial community and flavor compound in the fermentation process of Chinese rice wine using Fagopyrum tataricum grain as feedstock. Sci. Rep. 9 , 3365 (2019).

Hastie, T., Friedman, J. & Tibshirani, R. The Elements of Statistical Learning. (Springer, New York, NY). https://doi.org/10.1007/978-0-387-21606-5 (2001).

Dietz, C., Cook, D., Huismann, M., Wilson, C. & Ford, R. The multisensory perception of hop essential oil: a review. J. Inst. Brew. 126 , 320–342 (2020).

CAS   Google Scholar  

Roncoroni, Miguel & Verstrepen, Kevin Joan. Belgian Beer: Tested and Tasted. (Lannoo, 2018).

Meilgaard, M. Flavor chemistry of beer: Part II: Flavor and threshold of 239 aroma volatiles. in (1975).

Bokulich, N. A. & Bamforth, C. W. The microbiology of malting and brewing. Microbiol. Mol. Biol. Rev. MMBR 77 , 157–172 (2013).

Dzialo, M. C., Park, R., Steensels, J., Lievens, B. & Verstrepen, K. J. Physiology, ecology and industrial applications of aroma formation in yeast. FEMS Microbiol. Rev. 41 , S95–S128 (2017).

Article   PubMed   PubMed Central   Google Scholar  

Datta, A. et al. Computer-aided food engineering. Nat. Food 3 , 894–904 (2022).

American Society of Brewing Chemists. Beer Methods. (American Society of Brewing Chemists, St. Paul, MN, U.S.A.).

Olaniran, A. O., Hiralal, L., Mokoena, M. P. & Pillay, B. Flavour-active volatile compounds in beer: production, regulation and control. J. Inst. Brew. 123 , 13–23 (2017).

Verstrepen, K. J. et al. Flavor-active esters: Adding fruitiness to beer. J. Biosci. Bioeng. 96 , 110–118 (2003).

Meilgaard, M. C. Flavour chemistry of beer. part I: flavour interaction between principal volatiles. Master Brew. Assoc. Am. Tech. Q 12 , 107–117 (1975).

Briggs, D. E., Boulton, C. A., Brookes, P. A. & Stevens, R. Brewing 227–254. (Woodhead Publishing). https://doi.org/10.1533/9781855739062.227 (2004).

Bossaert, S., Crauwels, S., De Rouck, G. & Lievens, B. The power of sour - A review: Old traditions, new opportunities. BrewingScience 72 , 78–88 (2019).

Google Scholar  

Verstrepen, K. J. et al. Flavor active esters: Adding fruitiness to beer. J. Biosci. Bioeng. 96 , 110–118 (2003).

Snauwaert, I. et al. Microbial diversity and metabolite composition of Belgian red-brown acidic ales. Int. J. Food Microbiol. 221 , 1–11 (2016).

Spitaels, F. et al. The microbial diversity of traditional spontaneously fermented lambic beer. PLoS ONE 9 , e95384 (2014).

Blanco, C. A., Andrés-Iglesias, C. & Montero, O. Low-alcohol Beers: Flavor Compounds, Defects, and Improvement Strategies. Crit. Rev. Food Sci. Nutr. 56 , 1379–1388 (2016).

Jackowski, M. & Trusek, A. Non-Alcohol. beer Prod. – Overv. 20 , 32–38 (2018).

Takoi, K. et al. The contribution of geraniol metabolism to the citrus flavour of beer: Synergy of geraniol and β-citronellol under coexistence with excess linalool. J. Inst. Brew. 116 , 251–260 (2010).

Kroeze, J. H. & Bartoshuk, L. M. Bitterness suppression as revealed by split-tongue taste stimulation in humans. Physiol. Behav. 35 , 779–783 (1985).

Mennella, J. A. et al. A spoonful of sugar helps the medicine go down”: Bitter masking bysucrose among children and adults. Chem. Senses 40 , 17–25 (2015).

Wietstock, P., Kunz, T., Perreira, F. & Methner, F.-J. Metal chelation behavior of hop acids in buffered model systems. BrewingScience 69 , 56–63 (2016).

Sancho, D., Blanco, C. A., Caballero, I. & Pascual, A. Free iron in pale, dark and alcohol-free commercial lager beers. J. Sci. Food Agric. 91 , 1142–1147 (2011).

Rodrigues, H. & Parr, W. V. Contribution of cross-cultural studies to understanding wine appreciation: A review. Food Res. Int. 115 , 251–258 (2019).

Korneva, E. & Blockeel, H. Towards better evaluation of multi-target regression models. in ECML PKDD 2020 Workshops (eds. Koprinska, I. et al.) 353–362 (Springer International Publishing, Cham, 2020). https://doi.org/10.1007/978-3-030-65965-3_23 .

Gastón Ares. Mathematical and Statistical Methods in Food Science and Technology. (Wiley, 2013).

Grinsztajn, L., Oyallon, E. & Varoquaux, G. Why do tree-based models still outperform deep learning on tabular data? Preprint at http://arxiv.org/abs/2207.08815 (2022).

Gries, S. T. Statistics for Linguistics with R: A Practical Introduction. in Statistics for Linguistics with R (De Gruyter Mouton, 2021). https://doi.org/10.1515/9783110718256 .

Lundberg, S. M. et al. From local explanations to global understanding with explainable AI for trees. Nat. Mach. Intell. 2 , 56–67 (2020).

Ickes, C. M. & Cadwallader, K. R. Effects of ethanol on flavor perception in alcoholic beverages. Chemosens. Percept. 10 , 119–134 (2017).

Kato, M. et al. Influence of high molecular weight polypeptides on the mouthfeel of commercial beer. J. Inst. Brew. 127 , 27–40 (2021).

Wauters, R. et al. Novel Saccharomyces cerevisiae variants slow down the accumulation of staling aldehydes and improve beer shelf-life. Food Chem. 398 , 1–11 (2023).

Li, H., Jia, S. & Zhang, W. Rapid determination of low-level sulfur compounds in beer by headspace gas chromatography with a pulsed flame photometric detector. J. Am. Soc. Brew. Chem. 66 , 188–191 (2008).

Dercksen, A., Laurens, J., Torline, P., Axcell, B. C. & Rohwer, E. Quantitative analysis of volatile sulfur compounds in beer using a membrane extraction interface. J. Am. Soc. Brew. Chem. 54 , 228–233 (1996).

Molnar, C. Interpretable Machine Learning: A Guide for Making Black-Box Models Interpretable. (2020).

Zhao, Q. & Hastie, T. Causal interpretations of black-box models. J. Bus. Econ. Stat. Publ. Am. Stat. Assoc. 39 , 272–281 (2019).

Article   MathSciNet   Google Scholar  

Hastie, T., Tibshirani, R. & Friedman, J. The Elements of Statistical Learning. (Springer, 2019).

Labrado, D. et al. Identification by NMR of key compounds present in beer distillates and residual phases after dealcoholization by vacuum distillation. J. Sci. Food Agric. 100 , 3971–3978 (2020).

Lusk, L. T., Kay, S. B., Porubcan, A. & Ryder, D. S. Key olfactory cues for beer oxidation. J. Am. Soc. Brew. Chem. 70 , 257–261 (2012).

Gonzalez Viejo, C., Torrico, D. D., Dunshea, F. R. & Fuentes, S. Development of artificial neural network models to assess beer acceptability based on sensory properties using a robotic pourer: A comparative model approach to achieve an artificial intelligence system. Beverages 5 , 33 (2019).

Gonzalez Viejo, C., Fuentes, S., Torrico, D. D., Godbole, A. & Dunshea, F. R. Chemical characterization of aromas in beer and their effect on consumers liking. Food Chem. 293 , 479–485 (2019).

Gilbert, J. L. et al. Identifying breeding priorities for blueberry flavor using biochemical, sensory, and genotype by environment analyses. PLOS ONE 10 , 1–21 (2015).

Goulet, C. et al. Role of an esterase in flavor volatile variation within the tomato clade. Proc. Natl. Acad. Sci. 109 , 19009–19014 (2012).

Article   ADS   CAS   PubMed   PubMed Central   Google Scholar  

Borisov, V. et al. Deep Neural Networks and Tabular Data: A Survey. IEEE Trans. Neural Netw. Learn. Syst. 1–21 https://doi.org/10.1109/TNNLS.2022.3229161 (2022).

Statista. Statista Consumer Market Outlook: Beer - Worldwide.

Seitz, H. K. & Stickel, F. Molecular mechanisms of alcoholmediated carcinogenesis. Nat. Rev. Cancer 7 , 599–612 (2007).

Voordeckers, K. et al. Ethanol exposure increases mutation rate through error-prone polymerases. Nat. Commun. 11 , 3664 (2020).

Goelen, T. et al. Bacterial phylogeny predicts volatile organic compound composition and olfactory response of an aphid parasitoid. Oikos 129 , 1415–1428 (2020).

Article   ADS   Google Scholar  

Reher, T. et al. Evaluation of hop (Humulus lupulus) as a repellent for the management of Drosophila suzukii. Crop Prot. 124 , 104839 (2019).

Stein, S. E. An integrated method for spectrum extraction and compound identification from gas chromatography/mass spectrometry data. J. Am. Soc. Mass Spectrom. 10 , 770–781 (1999).

American Society of Brewing Chemists. Sensory Analysis Methods. (American Society of Brewing Chemists, St. Paul, MN, U.S.A., 1992).

McAuley, J., Leskovec, J. & Jurafsky, D. Learning Attitudes and Attributes from Multi-Aspect Reviews. Preprint at https://doi.org/10.48550/arXiv.1210.3926 (2012).

Meilgaard, M. C., Carr, B. T. & Carr, B. T. Sensory Evaluation Techniques. (CRC Press, Boca Raton). https://doi.org/10.1201/b16452 (2014).

Schreurs, M. et al. Data from: Predicting and improving complex beer flavor through machine learning. Zenodo https://doi.org/10.5281/zenodo.10653704 (2024).

Download references

Acknowledgements

We thank all lab members for their discussions and thank all tasting panel members for their contributions. Special thanks go out to Dr. Karin Voordeckers for her tremendous help in proofreading and improving the manuscript. M.S. was supported by a Baillet-Latour fellowship, L.C. acknowledges financial support from KU Leuven (C16/17/006), F.A.T. was supported by a PhD fellowship from FWO (1S08821N). Research in the lab of K.J.V. is supported by KU Leuven, FWO, VIB, VLAIO and the Brewing Science Serves Health Fund. Research in the lab of T.W. is supported by FWO (G.0A51.15) and KU Leuven (C16/17/006).

Author information

These authors contributed equally: Michiel Schreurs, Supinya Piampongsant, Miguel Roncoroni.

Authors and Affiliations

VIB—KU Leuven Center for Microbiology, Gaston Geenslaan 1, B-3001, Leuven, Belgium

Michiel Schreurs, Supinya Piampongsant, Miguel Roncoroni, Lloyd Cool, Beatriz Herrera-Malaver, Florian A. Theßeling & Kevin J. Verstrepen

CMPG Laboratory of Genetics and Genomics, KU Leuven, Gaston Geenslaan 1, B-3001, Leuven, Belgium

Leuven Institute for Beer Research (LIBR), Gaston Geenslaan 1, B-3001, Leuven, Belgium

Laboratory of Socioecology and Social Evolution, KU Leuven, Naamsestraat 59, B-3000, Leuven, Belgium

Lloyd Cool, Christophe Vanderaa & Tom Wenseleers

VIB Bioinformatics Core, VIB, Rijvisschestraat 120, B-9052, Ghent, Belgium

Łukasz Kreft & Alexander Botzki

AB InBev SA/NV, Brouwerijplein 1, B-3000, Leuven, Belgium

Philippe Malcorps & Luk Daenen

You can also search for this author in PubMed   Google Scholar

Contributions

S.P., M.S. and K.J.V. conceived the experiments. S.P., M.S. and K.J.V. designed the experiments. S.P., M.S., M.R., B.H. and F.A.T. performed the experiments. S.P., M.S., L.C., C.V., L.K., A.B., P.M., L.D., T.W. and K.J.V. contributed analysis ideas. S.P., M.S., L.C., C.V., T.W. and K.J.V. analyzed the data. All authors contributed to writing the manuscript.

Corresponding author

Correspondence to Kevin J. Verstrepen .

Ethics declarations

Competing interests.

K.J.V. is affiliated with bar.on. The other authors declare no competing interests.

Peer review

Peer review information.

Nature Communications thanks Florian Bauer, Andrew John Macintosh and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. A peer review file is available.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary information, peer review file, description of additional supplementary files, supplementary data 1, supplementary data 2, supplementary data 3, supplementary data 4, supplementary data 5, supplementary data 6, supplementary data 7, reporting summary, source data, source data, rights and permissions.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/ .

Reprints and permissions

About this article

Cite this article.

Schreurs, M., Piampongsant, S., Roncoroni, M. et al. Predicting and improving complex beer flavor through machine learning. Nat Commun 15 , 2368 (2024). https://doi.org/10.1038/s41467-024-46346-0

Download citation

Received : 30 October 2023

Accepted : 21 February 2024

Published : 26 March 2024

DOI : https://doi.org/10.1038/s41467-024-46346-0

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines . If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Quick links

• Explore articles by subject
• Guide to authors
• Editorial policies

Sign up for the Nature Briefing: Translational Research newsletter — top stories in biotechnology, drug discovery and pharma.

Introduction to Quantum Systems and Security Vulnerabilities

Ieee account.

• Change Username/Password
• Update Address

Purchase Details

• Payment Options
• Order History
• View Purchased Documents

Profile Information

• Communications Preferences
• Profession and Education
• Technical Interests
• US & Canada: +1 800 678 4333
• Worldwide: +1 732 981 0060
• Contact & Support
• About IEEE Xplore
• Accessibility
• Terms of Use
• Nondiscrimination Policy
• Privacy & Opting Out of Cookies

A not-for-profit organization, IEEE is the world's largest technical professional organization dedicated to advancing technology for the benefit of humanity. © Copyright 2024 IEEE - All rights reserved. Use of this web site signifies your agreement to the terms and conditions.